|
|
|
|
| |
| In
category Analysis Utilities |
| |
|
ROBOT Millennium Freeware
(http://www.robobat.com/n/en/212)
|
|
Robobat are pleased to announce the launch of ROBOT Millennium Freeware to a wide variety of markets and countries - ROBOT Millennium Freeware is a variant of the world renowned ROBOT Millennium software. Registration is a simple process after which Robobat will send the user a password to use the software. ROBOT Millennium Freeware is a powerful application that will allow users to analyze: - 2D and 3D multi material frame structures with up to 200 members
- FE plates and shells - walls, floors and surfaces with up to 500 nodes
- Section libraries from around the world
- Access to the ROBOT API to allow users to integrate their own applications
- Bi-directional link to Revit Structure
- Linear analysis, English language support
- In fact ROBOT Millennium Freeware will provide a solution for the engineer to carry out much of their everyday analysis work.
Commenting on the launch of ROBOT Millennium Freeware, Gary Wyatt, Sales & Marketing Director of Robobat, commented: "We are pleased to offer this free solution to Engineers and we know that they will make great practical use of this powerful application. When we were formulating our plans for ROBOT Millennium Freeware it was our goal to produce something highly relevant to the engineers work, not just a gimmick version or short term evaluation or money refunded if not satisfied offer, but rather a real, powerful piece of software for real projects. And that is what we have delivered with ROBOT Millennium Freeware. Naturally our hope is that satisfied users will then wish to explore additional aspects of ROBOT Millennium not covered by the freeware, such as multi code steel and concrete design, advanced FE analysis, cables, P-Delta, non linear and dynamic analysis - the upgrade to various commercial versions of ROBOT Millennium will be available to freeware users with an attractive pricing policy". Robobat reserves its non-disputable right to issue the freeware license at its own discretion. Activate ROBOT Millennium Freeware To install ROBOT Millennium Freeware you must have full administrator privileges. If you did not have the full administrator privileges (on network PC, typically IT personnel has those rights only), the software will not work. Please also note that ROBOT Millennium Freeware SPS license is not transferable from one PC to another. HARDWARE & SOFTWARE REQUIREMENTS The following configuration is recommended to ensure the optimal work: - a computer with the PENTIUM IV 2 GHz processor
- 2 Mb of RAM memory
- over 2 GB of free disk space.
- a graphic card allowing 1024 x 768 resolution
- The ROBOT Millennium program is designed to run under Microsoft Windows, with the following operating systems: Windows 2000 / Windows XP / Windows Vista
- Program will not operate properly under the older system versions like Windows NT/ Windows 98/ Windows Millennium.
admin
| 12/9/2007 | 4054
Views
|
|
| |
|
20-sim
(http://www.20sim.com/)
|
|
20-sim is a modeling and simulation program that runs under Microsoft Windows. With 20-sim you can model and simulate the behavior of dynamic systems, such as electrical, mechanical and hydraulic systems or any combination of these.
Free download, but can't save models.
admin
| 12/9/2007 | 2725
Views
|
|
| |
|
Mathcad-MicroStation Integration
(http://www.ptc.com/appserver/wcms/forms/index.jsp?im_dbkey=6 3489&icg_dbkey=482 )
|
Vendor description: Mathcad/MicroStation Integration utility exchange data between Mathcad and Bentley MicroStation software (for building, plant, civil, and geospatial engineering), engineers can achieve a single platform to integrate calculations with results from engineering software applications used to support the entire product/project development process.
Vendor by: PTC
Website: http://www.ptc.com
admin
| 9/4/2008 | 389
Views
|
|
| |
|
Mathcad Add-In for Microsoft Excel
(http://www.ptc.com/appserver/wcms/forms/index.jsp?im_dbkey=4 5095&icg_dbkey=482 )
|
|
The Mathcad add-in for Microsoft Excel lets you add Mathcad calculations and plots to Excel worksheets with full access to worksheet data. The add-in features 3D plot wizard, easy mapping between Excel ranges and Mathcad variables, automatic recalculation, and online help. Enhance your Excel worksheets with Mathcad calculations and 3D plots.
Requires Mathcad 14.0
admin
| 6/19/2008 | 4298
Views
|
|
| |
|
TimeGen 3.0
(http://www.xfusionsoftware.com/download_timegen.html)
|
|
Vendor description: TimeGen is an engineering CAD tool which allows an engineer to quickly draw timing diagrams. He waveforms can easily be exported to other Window programs, such as Microsoft Word, for use in writing design specifications. Features: - Export to clipboard (Copy/Paste) instantly to other software
- Ability to add/modify clocks, signals, buses
- Add arrow relationships, and invalid regions
- Add and subtract signal delays, text boxes, and more
- On the fly changes in real time
- All signals can be high, low, hi-Z, or bus
- Independent delay control for each cycle
- Dynamically move signals, labels, or arrows using the mouse
- Dynamically move signal edges with mouse
- Labels can have text attachments that dynamically move
- Duty cycle control for clocks
- New arrow types (straight, and angled)
- New asynchronous clock support
admin
| 7/31/2008 | 774
Views
|
|
| |
|
EMP3
(http://www.fieldp.com/emp3.html)
|
|
Vendor description: EMP3 calculates electromagnetic pulse propagation in 3D systems with complex arrangements of conducting, dielectric and magnetic materials. The program has a wide range of applications, including design of pulsed-power and pulsed-beam diagnostics, EMI analysis, wake-field calculation, optimization of pulsed-power convolutes and simulation of microcircuit time response and interference effects.
Features:
Vendor by: Field Precision
Website: http://www.fieldp.com/index.html
admin
| 11/20/2008 | 594
Views
|
|
| |
|
Mathematica Player 7
(http://www.wolfram.com/products/player/)
|
|
Vendor description: Mathematica Player 7 is a viewer application. It has the full Mathematica engine embedded, so ready to make documents come alive or to power applets.
Features:
- Read or print any Mathematica notebook, viewing text, graphics, typeset math, and animation
- Rotate, scale, and zoom 3D graphics in real-time
- Use outline and slideshow formatting options
- Simply point and click to interact with Mathematica-powered applications or documents
- Full Mathematica computational engine powers application, avoiding the need for pre-generated results
- Free demonstration and other interactive content available for exploring in player
Vendor by: Wolfram Research
Website: http://www.wolfram.com/
admin
| 3/24/2009 | 504
Views
|
|
| |
| In
category CAD Viewers |
| |
|
KOMPAS-3D V10 Viewer
(http://ascon.net/download.php)
|
KOMPAS-3D V10 Viewer is the utility intended only for viewing and printing of documents and model templates, created in professional solution KOMPAS-3D or KOMPAS-3D LT. The solution provides additional convenience for clients and partners of enterprises using KOMPAS as a basic 3D solid modeling system, documents can be editing using commercial version.
Website: http://ascon.net/
admin
| 11/13/2008 | 486
Views
|
|
| |
|
Alibre 3D Publisher
(http://www.alibre.com/promos/online/3DSketchUp.asp?SOURCE=PR ggl2007 )
|
|
The Alibre 3D Publisher is a free add-on that can be downloaded and installed in any of the Alibre Design 3D mechanical CAD applications. It will allow you to export industry standard formats such as STEP, IGES and SAT, as well as models created natively in Alibre Design than publish directly to the Google SketchUp format. You can also edit or enhance your models in Google SketchUp and upload them to Google 3D Warehouse or Google Earth.
admin
| 4/8/2008 | 730
Views
|
|
| |
|
Ashlar-Vellum Share
(http://www.ashlar.com/sections/products/share/share.html)
|
|
Vendor description: Share is a set of utilities that allow others to open, view, print and export Ashlar-Vellum files from their own Windows or Mac desktop. Share displays exactly what you intended, not some translation that might be just a little different. It's especially helpful for interacting with clients or production people using:
- AutoCAD
- SolidWorks
- Solid Edge
- Pro/E
- CATIA
Share comes in two version for Mac or Window.
Cobalt Share, which also views Xenon, Argon and old Vellum Solids files (.co, .xe, .ar, and .vs.)
Graphite Share, which also views old Vellum/Drawing board 2D/3D files (.vc6, and .vlm.)
admin
| 8/21/2008 | 1110
Views
|
|
| |
|
Autodesk Design Review
(http://usa.autodesk.com/adsk/servlet/mform?siteID=123112&id= 9131297 )
|
|
Vendor Description: Autodesk Design Review software saves time and money for everyone in the design review value chain, with easy-to-use tools to view, print, measure, mark up, and revise 2D and 3D designs without the original design-creation software. This tool tightly integrates with all Autodesk design software and enables project teams to adopt fully paperless design review and approval processes.
Features:
- 3D measure and markup: All viewing and markup features are available for both 2D and 3D designs
- Navigation tools: Easy-to-use navigation tools, including pull-apart, sectioning, and animation, give you access to rich design data
- Find and locate designs: Quickly find and locate design data in DWF files, including building components, parts in a complex assembly, and street names on a map
- Customizable User Interface: Enhance team productivity with the improved user interface in Autodesk Design Review software, which can be customized to suit each user’s needs
- DWFx Native Support: Publish automatically to DWFx format
- DWG file viewing, plotting, and publishing
- Ability to combine project data such as images and specifications in a single file
- Powerful status tracking to manage engineering change orders
- Round-trip markup integration with Autodesk design software products, so designers can overlay changes and comments on the original CAD file
admin
| 5/5/2008 | 759
Views
|
|
| |
|
Autodesk DWF Writer
(http://usa.autodesk.com/adsk/servlet/index?id=10798343&siteI D=123112 )
|
|
Built in to all Autodesk products, DWF publishing enhance collaboration and easily exchange project information with extended teams. Share 2D and 3D data as DWF files.
- Publish portable, secure 2D and 3D DWF files
- Publish Rich Design Information: Select the preferred Autodesk DWF Writer plug-in–SolidWorks 2006, CATIA (V5), or Pro/ENGINEER Wildfire2.0–to publish 3D models including intelligent design information
- Publish from Microsoft Applications: DWF Writer allows to publish easily and directly from Microsoft applications including PowerPoint, Word, Excel, Visio and Project applications
admin
| 5/21/2008 | 418
Views
|
|
| |
|
Autodesk DWG TrueView 2009
(http://usa.autodesk.com/adsk/servlet/index?id=6703438&siteID =123112 )
|
Vendor description: DWG TrueView software accurately view, plot, and publish authentic DWG files. Share AutoCAD drawings easily and accurately among engineers and architects. View and plot DWG and DXF files, and then publish them as DWF files for quick and easy review and markup in Autodesk Design Review. Take accurate distance and area measurements using the new object snap capabilities. Publish 3D DWF files. Get full support for the new AutoCAD 2009 drawing enhancements. Ensure the integrity and reliability of your data. Always get full drawing fidelity because the viewer is built on the same viewing technology as AutoCAD® 2009 software. Convert sets of drawings from new versions of AutoCAD to older versions, and vice versa, using incorporated TrueConvert functionality. Add page setup information during the conversion process. Use the AutoCAD eTransmit technology to bundle a complete file set for conversion. DWG TrueView software translates DWG files created with any Autodesk or RealDWG software licensee product to the AutoCAD R'4, AutoCAD 2000, AutoCAD 2004, and AutoCAD 2007 DWG file formats.
admin
| 3/31/2008 | 800
Views
|
|
| |
|
Autodesk Express Viewer
(http://dwfcommunity.autodesk.com/products/autodesk-dwf-viewe r.html )
|
|
DWF (Design Web Format) is a fast, efficient way to distribute design data to anyone who needs it. With Autodesk Express Viewer, a small, free, downloadable application, you can view and print that rich data. What you see is exactly what the designer intended, because the information cannot be changed. DWF-intelligence you can see.
admin
| 12/31/1969 | 672
Views
|
|
| |
|
Autodesk Inventor View
(http://usa.autodesk.com/adsk/servlet/index?id=10535296&siteI D=123112 )
|
|
Share native Autodesk Inventor software data with non-Autodesk Inventor users with this freely distributable viewer that delivers high-fidelity viewing and printing of parts, assemblies and drawings.
Download Autodesk Inventor View to view and print high-quality 3D designs created in Autodesk Inventor software
- Autodesk Inventor View 2009
- Autodesk Inventor View 2008
- Autodesk Inventor View 11
- Autodesk Inventor View 10
admin
| 5/8/2008 | 476
Views
|
|
| |
|
Autodesk Inventor View 2009
(http://usa.autodesk.com/adsk/servlet/item?siteID=123112&id=1 1245323 )
|
|
Vendor description: Share native Autodesk Inventor software data with non-Autodesk Inventor users with this freely distributable viewer that delivers high-fidelity viewing and printing of parts, assemblies and drawings. Ensure you download and install the version of Inventor View 2009 appropriate for your operating system. Additionally, do not install this software on computer that already has Autodesk Inventor 2009 software installed.
admin
| 7/10/2008 | 401
Views
|
|
| |
|
Autodesk NavisWorks Freedom
(http://usa.autodesk.com/adsk/servlet/mform?siteID=123112&id= 11091608 )
|
|
Vendors description: Get whole-project view using Autodesk NavisWorks solutions, combine design data created in BIM applications such as Revit-based software with models created by other design tools. NWD files viewed using NavisWorks Freedom provide stakeholders equal access to explore and experience the whole-project view.
View all simulations and output saved in NWD format. It offers design professionals an invaluable means of communication by creating compressed, secure, and streamable project review files in the NWD format. A practical solution to streaming large CAD models, NWD files require no model preparation, third-party server hosting, setup time, or ongoing costs. Files may also be viewed in 3D DWF format. Effective collaboration is achieved through easier communication of design intent, collaborative reviews of stakeholder contributions, and sharing of all results.
Features:
admin
| 7/10/2008 | 510
Views
|
|
| |
|
Bentley View
(http://www.bentley.com/en-US/Products/Bentley+View/AutoCAD-U sers )
|
|
Vendor description: Bentley View is the best tool for projects that require both a free DGN viewer and a free DWG viewer. It's a powerful viewing, measuring, and printing application for MicroStation, AutoCAD, or hybrid projects.
Features:
- Open Multiple CAD File Formats: Bentley View provides a high performance environment to open and interact natively with design files of all types, including DGN, DWG, DXF, raster, or a hybrid. Bentley View works across file format versions too, so whether your DWG files are in the R11 format, AutoCAD 2008, or something in between, Bentley View opens them all
- Print to Adobe PDF: Generate Adobe PDF from your design files with just the touch of a button. It has never been easier to share design files with any audience than with Adobe PDF, the world’s most popular electronic document format
- Interact with 2D and 3D in the Same Space: No need to open separate instances of a design file to see both its 2D and 3D views. Simultaneously view both in their native formats. Pan, tilt, and zoom to manipulate your view as desired. Bentley View is optimized to enable seamless viewing of large or complex models
- Measure Designs: Need to figure the length and width of a support beam from a design file? How about determining the area of a room? Bentley View is the perfect tool for measuring elements in a model. Its easy-to-use snapping and measuring tools make determining length, volume, and area a breeze
- Print to Scale: Print drawings, models, or maps to any Windows printing device with Bentley View. Bentley View also prints to scale, giving users tools to print design files with precision and accuracy
admin
| 4/30/2008 | 1008
Views
|
|
| |
|
CADMATIC eBrowser Light
(http://www.cadmatic.com/ebrowser/index.html)
|
|
Browser plugin for viewing EBM files, 3D models created in CADMATIC plant design software or NUPAS-CADMATIC ship design software.
Sample models are available at the web site.
admin
| 12/31/1969 | 577
Views
|
|
| |
|
CADSTAR Design Viewer 10.0
(http://www.cadstarworld.com/sw-viewer.asp)
|
|
Vendor description: The CADSTAR Design Viewer lets you share and access CADSTAR design data very easily on any of your preferred Windows platforms. The design data is accessible to any user, even the occasional users, with easy viewing and sharing of schematic and PCB data. It dramatically improves workgroup dynamics by increasing project productivity either in standalone mode or when used in conjunction in a CADSTAR design environment.
admin
| 8/14/2008 | 572
Views
|
|
| |
|
Columbus Personal Edition
(http://www.oasys-software.com/products/document_management/c olumbus/downloads.shtml )
|
|
Columbus is a combined navigator and viewer that allows to organize and view data in a more structured way. Utilises a powerful viewing engine and supports many commercial file formats, including Microsoft Office, AutoCAD, MicroStation and Hewlett Packard HPGL/2.
Logically related files and folders can be gathered under one heading even though they are spread across multiple folders and servers around the office or globe. This makes it easy to view, edit, redline, issue and print data regardless of the document type or where it resides.
Columbus Personal Edition Intended for private use, where access to network resources and other professional features are not required.
admin
| 5/15/2008 | 507
Views
|
|
| |
|
DWG Viewer
(http://www.infograph.com/products/dwgviewer/)
|
|
DWG Viewer will open native DWG, DXF, and DWF files (AutoCAD r12 to 2005) for viewing, along with accompanying Xref files. It will also open Informative Graphics' own "content sealed" (CSF) file format, which is generated by the company's Net-It publishing products and featuring Visual Rights security options for file content. The DWG viewer also supports IGC's legacy formats from previous versions of Brava! and MYRIAD. Based on ActiveX, IGC's Free DWG Viewer serves as a stand-alone desktop application, or an ActiveX control that can be invoked from a specified application, such as Internet Explorer. Printing and markup functions are available in IGC's fee-based viewing products. For a full-featured viewer, IGC recommends it's MYRIAD 2D/3D desktop viewing software.
admin
| 4/10/2008 | 724
Views
|
|
| |
|
DWGgateway
(http://www.dwggateway.com/)
|
|
Vendor description: DWGgateway software is a free data translation plug-in for AutoCAD users. It enables you to work easily with DWG data generated with any version of AutoCAD. AutoCAD user who occasionally has issues sharing files with colleagues, makes your life easier than ever now that it reads files created with AutoCAD
Features:
- Open DWG files created by any version of AutoCAD software.
- Save DWG files to any version of AutoCAD software.
- No need to leave the AutoCAD UI to open, save, or convert files - simply access DWGgateway from inside AutoCAD.
- Quick and easy download - the file size is small and there are no lengthy forms to fill out
- DWGgateway enables AutoCAD users to create PDF documents that can be shared with virtually anyone. Includes Adobe PDF Library technology
admin
| 4/30/2008 | 574
Views
|
|
| |
|
DwgViewer
(http://www.progesoft.com/compra/index.asp?left=viewer&lang=e ng )
|
|
DWG Viewer is ProgeSOFT's FREE high-performance review, measure, and plotting tool for digital design data. This easy-to-learn andeasy-to-use viewer transforms the paper-based design review process into an efficient electronic one that quickly gets the information toeveryone who needs it-including those without access to the originating software such as AutoCAD? or IntelliCAD?. Familiarity with the originating design application is not necessary. Helps you reduce cycle time and costly printing and plotting and keeps your entire project team connected, regardless of where they are.
admin
| 12/31/1969 | 460
Views
|
|
| |
|
eDrawings - AutoCAD Viewer
(http://www.solidworks.com/pages/products/DWGgateway/eDrawing s-Free3Dand2DCADViewerandPublisher.html )
|
|
eDrawings Viewer software view, print, and review native AutoCAD files, DWG and DXF files. The eDrawings Viewer is intended primarily for people who do not use CAD software and thus do not need to publish eDrawings files themselves.
Vendor by: Dassault Systems
Website: http://www.solidworks.com
admin
| 7/24/2008 | 2474
Views
|
|
| |
|
eDrawings for Pro/ENGINEER
(http://products.geometricglobal.com/downloads/edrawings/proe /eDrawingsForProE_Creo_9_1_32Bit.exe )
|
|
eDrawings for Pro/ENGINEER is publishing and viewing tool. Benefits - Publish lightweight viewables (up to a 95% file size reduction) of Pro/ENGINEER designs
- View native DXF/DWG files and viewables published by eDrawings for SolidWorks, CATIA, and AutoCAD
- Accelerate communication with product development team members and speed design reviews
- Share information quickly, easily and effectively via e-mail to reduce design misinterpretation
- With eDrawings Professional for Pro/ENGINEER, gain additional capabilities for exploded views, mark-ups, and measurements
Vendor by: Geometric
Website: http://www.geometricglobal.com/Technology+Solutions/index.aspx
admin
| 5/29/2008 | 476
Views
|
|
| |
|
Exchange 5.6
(http://www.delcam.com/general/downloads/software_dl.asp)
|
|
Vendor description: 'xchange is a stand alone CAD translator program capable of translating from many popular CAD input formats to various output formats. Downloading 'xchange and opening and viewing files from all compatible systems is free and without obligation and everything is confidential as you don't have to send any of your CAD data files over the internet. You only pay when you chose to save the files you have translated on a pay-per-translation basis by credit card. New enhancements: 'upports version 19 Power'"AP' models The support for file names and directories using non-latin characters has been much improved, particularly for the far-eastern languages, such as simplified and traditional Chinese Added a new resource to override IG'' hierarchy flags The description of the resource "dtpOptTrimmed'urfaceImport" (which comes under the heading "Parasolid" on the export options page) has been changed to remove references to the word "import" as this resource is actually used to control the export of topologies to Parasolid. The name of the resource itself has been left unchanged for now Add support for translation of environmental data to 'xchange. In particular, allow 'xchange to read/write lighting data from/to U3D and ddx files and to write it to a pdf document 'xchange CAD input formats: VDA-F', IG'', 'T'P, Delcam Parts, DGK 'paceClaim up to version 2007, 'olid 'dge, ACI' 17.0 files, 'DRC - ID'A' Output formats: Rhino 3 and 4 DM, Decrypted Pro/', ACI', VDA-F', 'T'P, IG'', Delcam DGK
Vendor by: Delcam
Website: http://www.delcam.com
admin
| 8/21/2008 | 876
Views
|
|
| |
|
Free DWG Viewer 5.1
(http://www.infograph.com/products/dwgviewer/DWGdownload1.asp
)
|
|
Free DWG Viewer will open native DWG, DXF, and DWF files for viewing,along with accompanying Xref files. It will also open Informative Graphics' own "content sealed" (CSF) file format, which is generated by the company's Net-ItR publishing products and featuring Visual Rights Tsecurity options for file content. The DWG viewer also supports IGC's legacy formats from previous versions of Brava!R and MYRIADR. Based on ActiveX, IGC's Free DWG Viewer serves as a stand-alone desktop application, or an ActiveX control that can be invoked from a specified application, such as Internet Explorer. Printing and markup functions are available in IGC's fee-based viewing products. For a full-featured viewer, IGC recommends it's MYRIAD 2D/3D desktop viewing software.
Supports: AutoCAD (R12-2005), DWF v6, CSF
admin
| 12/31/1969 | 692
Views
|
|
| |
|
FreePNview
(http://homepage.eircom.net/~wicam/download.htm)
|
|
A free, downloadable application that lets you view 2D and 3D PN4000 CAD format as well as 2D and 3D DWG, DXF and STEP drawing formats.
admin
| 12/31/1969 | 730
Views
|
|
| |
|
JT2Go
(http://www.JT2Go.com)
|
|
3D Data at Your Fingertips
JT2Go is a no-charge, 3D viewer that enables anyone in the world to view JT files. JT is the world's most widely used visualization format and is in production use by thousands of companies worldwide. Compact and accurate, JT is used throughout the product development lifecycle in all major industries to communicate the critical design information typically locked up inside a CAD file.
The JT2Go viewer connects suppliers with their customer's lifecycle processes such as design reviews, request for quotes, and any other process that requires 3D. To aid in the transition from 2D to 3D, users can also visualize 2D CGM drawings as well as TIF images. JT2Go is easy to upgrade to UGS' Teamcenter Visualization products that are production-proven by more than 600,000 users worldwide.
UGS' customers have come to rely on JT as the most robust visualization format on the market today. Simply click on the link above, download and install the viewer to quickly begin to enjoy the benefits of JT.
admin
| 12/31/1969 | 719
Views
|
|
| |
|
Kubotek Spectrum
(http://www.kubotekusa.com/products/spectrum)
|
|
Kubotek Spectrum Kubotek Spectrum is downloadable viewer software for reviewing 3D models and drawings from the latest versions of the most commonly used engineering (CAD) programs. The simple Windows interface can be easily used by manufacturing, sales, support and service departments without having to learn or install a full-featured CAD system. Kubotek Spectrum fully supports view manipulation, printing, 3D shading, measurement (distance, area and volume), and publishing HOOPS-enabled HTML files but will not overwrite the original engineering file. Supported File Formats - Full support for KeyCreator and CADKEY CKD files (all versions)
- Full support for CADKEY PRT files (versions 5, 6, 7, 97, 98, 99 and '9)
- AutoCAD DWG/DXF ''-2005 (drawings, wireframe, surfaces, and solids)
- Unigraphics NX ' and 2 (solids and surfaces)
- Pro/Engineer Wildfire ' and 2 (solids and surfaces)
- Autodesk Inventor 6-9 (solids and surfaces)
- SolidWorks 98-2005 (solids and surfaces)
- STEP AP203 and 2'4 (solids and surfaces)
- IGES (drawings, wireframe, surfaces, and solids)
- ACIS SAT '.5-'4 (full support)
- Parasolid XT '2-'6 (solids, surfaces, and wireframe)
- CATIA 4.'-4.4, (solids and surfaces)
- Unigraphics ''-'8 (solids and surfaces)
- Pro/Engineer '6-200' (solids and surfaces)
- STL (polygon)
Features - Print or plot to all Windows supported devices
- Verify entity attributes and positions
- Measure any size, distance, area or volume (solids)
- Modify display using standard pan, zoom, rotate, and render functions
- Rotate display to stored view orientations
- Hide levels(layers) and parts
- Split the document window into 2-4 separate viewports
- Open multiple files at the same time
- Create custom print setup configurations with full control of pen, color, width and dash size handling
- Create custom configuration of toolbars and shortcut keys
- Export graphics to TIF, HPGL/2, Windows Metafile, HOOPS Metafile or HTML
System Recommendations - Windows XP#, 2000 SP2
- ''5 MB hard drive space for installation
- '024 x 768 resolution (minimum)
- Power User or higher permission level required
Vendor by: Kubotek
Website: http://www.kubotekusa.com
admin
| 12/31/1969 | 1068
Views
|
|
| |
|
MYRIAD 3D Reader
(http://www.myriadviewer.com/download.htm)
|
|
Vendor description: Views STL, VRML, 3D DWF and secure 3DF files created by MYRIAD. It is simple to use and runs as desktop program or ActiveX component in web page.
Features:
- Easy to use
- Supports STL, VRML, 3D DWF and secure 3DF
- View, rotate and measure 3D models cross section and cut away
- Explode assemblies
- Desktop and web browser (IE only)
admin
| 7/3/2008 | 476
Views
|
|
| |
|
MYRIAD 3D Reader
(http://www.myriadviewer.com/myriadreader.htm)
|
|
It is free software that views STL, VRML, 3D DWF and secure 3DF files created by MYRIAD. It is simple to use and runs as a desktop program or as an ActiveX component in a web page.
Key Features
- View, rotate and measure 3D models
- Cross section and cut away
- Explode assemblies
- Easy to use
admin
| 4/16/2008 | 526
Views
|
|
| |
|
ObjectViewer
(http://www.rhino3d.com/resources/display.asp?language=en&lis ting=103 )
|
|
Vendor description: ObjectViewer plug-in displays a list of all objects in the Rhino file organized in their grouping structure.
Features:
-
View a tree-list of all objects in the scene, even hidden objects
-
Select objects in the viewer window and edit them without ungrouping them first
-
Use a right-click menu to edit object properties including name and visibility state
-
Grouped objects are displayed under their group name in folders
-
Commands: ShowViewer - Displays the viewer window
admin
| 7/10/2008 | 311
Views
|
|
| |
|
PowerShape
(http://www.delcam.com/download_pshape/download1.htm)
|
|
Free CAD viewer for Delcam and IGES files, by Delcam.
admin
| 12/31/1969 | 499
Views
|
|
| |
|
ProductView Express
(http://www.ptc.com/products/productview/express)
|
|
There are some people in your product development chain that might not use Pro/ENGINEER but still need to see your work. With ProductView Express, others can view your files without having Pro/ENGINEER installed. Your extended team can view parts, assemblies, and drawing just by installing this free browser plug-in. It's available to Windows, UNIX and Linux users and requires no special training. What's more, our patent-pending Shrinkwrap technology allows users to work with even the largest mega-assemblies.
The following platforms are supported
- Windows NT/2000/XP (6.6 MB)
- HP (12.6 MB)
- SGI (12.8 MB)
- Sun (9.4 MB)
- Linux (8.6 MB)
Note: The link supplied will take you to the PTC ProductView Express link page.
admin
| 6/16/2008 | 611
Views
|
|
| |
|
Solid Edge Viewer
(http://www.plm.automation.siemens.com/en_us/products/velocit y/solidedge/ )
|
|
The Solid Edge Viewer is easy to download and install, and will allow you to view Solid Edge assembly, part, sheet metal and draft files, as well as DXF and AutoCAD DWG files.The V19 and V18 Viewers are available in Chinese-Simplified, Chinese-Traditional, English, French, German, Italian, Korean, Russian and Spanish.(Require free registration to download)
admin
| 6/12/2008 | 496
Views
|
|
| |
|
SolidView Lite
(http://www.solidview.com/svlite.html)
|
|
Free 3D CAD viewer, can handle STL, OBJ, VRML, SolidWorks (parts and assemblies) and SFX formats, by Solid Concepts.
admin
| 12/31/1969 | 560
Views
|
|
| |
|
SolidWorks Viewer
(http://www.solidworks.com/pages/products/solutions/viewerdow nload.html )
|
|
Vendor description: SolidWorks Viewer is plug-in for viewing SolidWorks parts, assemblies and drawings.
You can share designs easily over the Internet using the free SolidWorks Viewer, available for Windows. Provide your customers with a preview of designs in process. Ensure that you are on the right track before you produce costly prototypes. With the SolidWorks Viewer you can send designs for client review by email, or place designs on the web for your client to open and review.
The SolidWorks Viewer functions as an Internet plug-in or as a standalone Windows application.
admin
| 4/24/2008 | 501
Views
|
|
| |
|
VariCAD Viewer
(http://www.varicad.cz/en/home/products/products/)
|
|
A scaled-down version of VariCAD used for viewing VariCAD files. With the VariCAD Viewer, anyone can open, view and print your drawings without having to pay for additional VariCAD licenses. It can also open STEP (3D), DWG (2D), DXF (2D) and IGES (2D) files.
admin
| 6/19/2008 | 661
Views
|
|
| |
|
VectorWorks 2008 Viewer
(http://www.nemetschek.net/downloads/fundamentals/index.php)
|
|
The Viewer is a value-added benefit to VectorWorks 2008 and VectorWorks Industry Series users. The Viewer enables those who do not own the program to look at and print projects created in VectorWorks 2008 or any of our Industry Series products. And, it allows on-line collaboration between designers and clients during the creative process. Also allows users to view VectorWorks version 9, 10, 11 and 12 files.
Download available for Windows and Macintosh.
admin
| 8/21/2008 | 468
Views
|
|
| |
|
VERTEX Viewer
(http://www.vertex.fi/english/news/register_viewer.html)
|
|
The free VERTEX Viewer software allows you to view and print the existing VERTEX 3D-models, the connected 2D-drawings and distinct VERTEX 2D-drawings.
You can also view and print rasterized drawings made with VERTEX Light Works visualization option.
The 3D-model can be viewed as OpenGL-shaded and as VERTEX wire-frame model. The wire-frame model can be viewed also with removed hidden lines.
Working with the 3D-model you can use zoom and pan, you can rotate the model and fly in the model.
VERTEX Viewer is a free software application for VERTEX CAD. VERTEX Viewer supports Windows NT and Windows 2000 operating systems. (Windows 95/98 not supported in the September 25th, 2001 release and newer)
admin
| 12/31/1969 | 564
Views
|
|
| |
|
View Expert
(http://www.deskartes.com/)
|
|
The View Expert contains the following features:
- Read in and view STL, DXF and DA files
- Bounding box, volume, area, printing, email
- Real-time OpenGL rendering - rotate, zoom, pan, clip, move light
admin
| 8/7/2008 | 414
Views
|
|
| |
|
Autodesk Design Review - Utilities and Telecom
(http://usa.autodesk.com/adsk/servlet/item?siteID=123112&id=8 411945 )
|
|
Vendor description: Autodesk Design Review - Utilities and Telecom can improve the effectiveness and efficiency of the entire review process in the utilities and telecom industries.
Features:
- DWFx Native format
- Integrated search
- Share with Project Freewheel
- Customizable user interface
- Georeferencing within DWF files
- Navigation tools
- Rotation capabilities
- Batch printing
- 2D and 3D markup
- 3D measuring tools
- save and import all markups
Tightly integrated with Autodesk MapGuide, Map3D, Civil 3D and all Autodesk products.
Design Review offers your team an intuitive solution for visualizing and reviewing designs, drawings and maps.
Vendor by: Autodesk
Website: http://usa.autodesk.com/adsk/servlet/home?siteID=123112&id=129446
admin
| 10/16/2008 | 342
Views
|
|
| |
|
CADView V7
(https://fastcad.com/x-view7.html)
|
|
CADView V7 is free CAD drawing view and print program. You no longer need to pay for an off-line printing program, and you can send this program with your drawing files to clients for their viewing and printing, assured that it can not be used to modify your work.
CADView V7 is used to view CAD drawings created in FastCAD, EasyCAD, or FastCAD/DOS. View7 also loads and views AutoCAD-compatible 2D DWG and DXF drawing files. It can search drawings for text, bookmark a sequence of drawings for orderly presentation, zoom in or out, or to named views, change visible layers, etc.
Vendor by: Evolution Computing
Website: https://fastcad.com/x-home.html
admin
| 10/16/2008 | 665
Views
|
|
| |
|
Acme CADSee
(http://www.dwgtool.com/cadsee.htm)
|
|
Vendor description: CAD drawing and image file viewer, browser and Print. The fastest and easiest-to-use DWG/DXF/DWF (AutoCAD R2.5-R2006), PSD, BMP, JPEG, TIFF, PCX, GIF, PNG, MNG, TGA, PCX, ICO, WMF file viewer. AcmeCADSee is two tools in one. A full-featured drawing viewer quickly displays your images in high quality. The drawing file browser lets you efficiently find and organize your drawing file.
Features:
- Open various DXF, DWG versions ( R2.5-R2006) and DWF
- Identify literal fonts and entity color correctly
- Support BMP, JPEG, GIF, PCX, TGA, TIFF, MNG, PNG, PSD, WMF, ICO
- Support full-screen mode ( press F )
- Support printing
- Register once and upgrade free permanently
- Support Windows95/98/ME/NT/2000/XP, without AutoCAD
Vendor by: DWG TOOL Software
Website: http://www.dwgtool.com/index.htm
admin
| 7/3/2008 | 938
Views
|
|
| |
|
KOMPAS-3D V10 Viewer
(http://ascon.net/download.php)
|
KOMPAS-3D V10 Viewer is the utility intended only for viewing and printing of documents and model templates, created in professional solution KOMPAS-3D or KOMPAS-3D LT. The solution provides additional convenience for clients and partners of enterprises using KOMPAS as a basic 3D solid modelling system, documents can be editing using commercial version.
Vendor by: ASCON
Website: http://ascon.net/index.php
admin
| 10/13/2008 | 409
Views
|
|
| |
|
eDrawings Viewer for Mac
(http://www.edrawingsviewer.com/MAC_Viewer.html)
|
|
Vendor Description: eDrawings Viewer software for Mac allows to view, print, and review all types of eDrawings files.
In addition, eDrawings Viewer allows convenient viewing of native AutoCAD files (DWG and DXF) and native SolidWorks parts, assemblies, and drawings. The eDrawings Viewer is intended primarily for people who do not use CAD software and thus do not need to publish eDrawings files themselves. Innovative built-in interpretation tools include 3D pointer, virtual folding, point-and-click animation, and hyperlinking. System requirement: Mac OS X 10.4 and above
Vendor by: Dassault Systems
Website: http://www.edrawingsviewer.com/index.html
admin
| 12/28/2008 | 640
Views
|
|
| |
|
BluePrint Now
(http://labs.solidworks.com/Products/Product.aspx?name=bluepr intnow )
|
|
Vendor description: BluePrint Now is free online DWG editor, giving you the ability to load and proof DWG files to review anywhere without having DWG viewer/editor on your computer.
Create DWG files from almost any computer with internet connection. BluePrint Now will give you space on a secure server to store your drawings. These drawings can be accessed at any time, and by anyone to whom you decide to e-mail a link. Your drawing’s recipients can then review or make changes in a web-based collaboration.
Vendor by: SolidWorks Labs
Website: http://labs.solidworks.com/
admin
| 1/15/2009 | 350
Views
|
|
| |
|
CSG Justview 5.3
(http://www.cad-schroer.com/index.php?screen=1&ziel=Support-D ownloads&land=com )
|
CSG Justview 5.3 quickly display a MEDUSA, MEDUSA4 or STHENO/PRO drawing in your web browser. Includes integrated segment measuring, panning and zooming functionality.
Vendor by: CAD Schroer
Website: http://www.cad-schroer.com/index.php?&land=com&scr=1.1
admin
| 1/22/2009 | 510
Views
|
|
| |
|
WorkXPlore 3D
(http://www.workxplore-3d.com/uk/product/free-download-demos/ free-download/ )
|
|
Vendor description: WorkXPlore 3D is a full feature, high speed 3D CAD viewer and analyzer.Designed to enable collaborative working in engineering companies, WorkXPlore 3D can import and amalgamate very large CAD models from multiple design systems, check dimensions, volumes and interferences, annotate changes, and share this information with colleagues, customers and suppliers.
WorkXPlore 3D is easy to use, quick to master software enabling you to reduce data processing times; improve, increase and guarantee safe data exchange and ensure data reliability.
Benefits:
- Direct access to diverse 3D CAD files with one single software application
- Fast reading and smooth handling of complex and large CAD data files
- Efficient 2D/3D data sharing, exchange and communications
- Advanced trade oriented 3D model analysis (quotes, estimates, diagnostics)
- Reduced design cycles and minimized manufacturing costs
- Reduced engineering costs and improved project revision process
- Effective communication with the extended enterprise (customers, vendors and 3rd party contractors)
- Improved collaboration between design and manufacturing
- Facilitates improved quality functions by accurately and effectively defining requirements and efficiently analyzing inspection data
- Easily construct more effective visual illustrations for process documentation, operator instructions, quality procedures and training manuals
- Cost reduction as the need to purchase and train on expensive CAD is removed
Vendor by: Sescoi
Website: http://www.sescoi.com/
admin
| 2/5/2009 | 587
Views
|
|
| |
|
CadFaster|QuickStep
(https://ssl.cadfaster.com/shop/quickstep.php)
|
|
Vendor description: CadFaster|QuickStep is a free 3D file viewer with professional-class features. Supports standard file formats such as STEP and HSF. Users may choose between OpenGL and DirectX drivers. CadFaster|QuickStep rendering is highly optimized and user interface is perfect for interactive 3D model navigation. Innovative out-of-core rendering solution ensures that even the largest 3D files can be opened and viewed interactively. CadFaster|QuickStep supports hardware vertex/pixel shaders to achieve photo-realistic real-time rendering quality. This includes glossy and reflective materials, mirror surfaces, bump mapped objects etc. To maintain best possible user experience, sophisticated rendering algorithms are used. Technologies such as occlusion culling and dynamic level of detail ensure the ultimate rendering performance even with most complex 3D models.
Features:
- Shaded display mode with optional silhouette/feature edge lines
- Perspective and orthogonal projections
- Innovative Rotate, pan and zoom tools with single mouse click
- Standard STEP, DWG, DXF, IGES and HSF (Hoops Stream File) file formats supported
- Supports displaying textures and advanced graphical effects via Shaders
- Advanced section view functionality
- Support for 3DConnextion 3D mouse (in registered version) speeding up the design workflow
- Sharing large and complex CAD models between designers and reviewers
Vendor by: CadFaster
Website: http://www.cadfaster.com/
admin
| 2/18/2009 | 714
Views
|
|
| |
|
XVL Player
(http://www.lattice3d.com/products/products_player_3d_softwar e.html )
|
|
Vendor description: XVL Player enables users to easily add the power of 3D to technical documents, spreadsheets, and presentations. Users can freely view and distribute these XVL documents. Lattice provides converter software to create XVL files and application software for XVL documents. Users can zoom, pan, rotate, and interact with the scene, play XVL 3D animations, support hot links and triggers. Customize views with specific element visibility controls and display controls which provide choices of color mapping displays and multiple shading styles, including wireframe, hidden-line, shaded, and textured views. Control surface processing with multiple drag modes.
Features:
- Full Camera Control
- Color Mapping
- Several Rendering Styles
- Multiple Drag Modes
- 3D Animation
- Browser Support
- Microsoft Office Support
- Graphics Acceleration Support
- Surface Processing Controls
- Selectable Element Displays
Vendor by: Lattice Technology
Website: http://www.lattice3d.com/index.html
admin
| 2/26/2009 | 521
Views
|
|
| |
|
CAD View
(http://www.cadsofttools.com/en/products/plugins_for_3d-party _programs.html )
|
|
Vendor description: CAD View is an AutoCAD plug-in to view AutoCAD DWG, DXF, HPGL, HPGL2, SVG and CGM formats. Export to BMP, WFM, EFM, JPG, DXF.
CAD View Plugin for total commander shows only one layout in free version.
Note: Free for non-commercial use only.
Vendor by: Soft Gold Ltd
Website: http://www.cadsofttools.com/
admin
| 4/16/2009 | 535
Views
|
|
| |
|
Vectorworks 2009 Viewer
(http://www.nemetschek.net/downloads/fundamentals/index.php)
|
|
Vendor description: Vectorworks 2009 Viewer is a value-added benefit to Vectorworks 2009 and Vectorworks industry series users. The Viewer enables those who do not own the program to look at and print projects created in Vectorworks 2009. And, it allows on-line collaboration between designers and clients during the creative process. Please note that the version 2009 Viewer allows users to view Vectorworks version 9, 10, 11, 12, and 2008 files as well.
Download available for Windows and Macintosh.
Vendor by: Nemetschek
Website: http://www.nemetschek.net/
admin
| 4/30/2009 | 398
Views
|
|
| |
|
RP Viewer
(http://www.openrp.com/products/rp_viewer/index.htm)
|
|
Vendor description: RP Viewer is a free application to view, read, write and print RP and STL files. With RP Viewer it becomes very easy to create and share RP files with another party such as a RP service bureau or a supplier.
Features:
- Model property calculations such as surface area, volume, number of vertices, edges, faces and shells
- Superior 3D trackball style viewing with dynamic zoom and pan
- Print and print preview
- Directly send model by email
- Pre-configured axis and isometric views
- Display model as solid, wireframe and points
- Orthographic and perspective projection
- Model transparency (vital in visualizing hollowed models)
- Different colors for front face, back face and background (helps in detecting errors in models)
- One-click copy to clipboard
- Customizable viewing options
- Capable of viewing multiple documents at the same time
- Comprehensive help system
Vendor by: SYCODE
Website: http://www.openrp.com/index.htm
admin
| 5/13/2009 | 448
Views
|
|
| |
|
Rapidform EXPLORER
(http://www.rapidform.com/portal/default/Products/index?Categ ory=Products_RapidformEXPLORER_Overview )
|
|
Vendor description: Rapidform EXPLORER is a free 3D Data collaboration software, offering data viewing, measuring, markup and analysis of inspection results.
Features:
- Free viewer for 3D scan data and CAD models - open files from almost any 3D scanner, plus STL, OBJ, IGS, STP and Parasolid formats. Rotate, zoom, add notes, take measurements and capture screen shots
- Inspection collaboration - open, view, annotate and make new custom reports from Rapidform XOV files. EXPLORER offers linear, angular and radial dimensioning tools so you can take quick measurements of scans and CAD models as well
- Create custom inspection reports - open inspection results from Rapidform XOV and create custom PDF, PowerPoint and Excel files with detailed measurement results and screen shots
- Open and view huge 3D files - EXPLORER is available in 32- and 64-bit versions so you can view files with hundreds of millions of points or triangles, or CAD part models with thousands of surfaces
- Publish 3D models as web pages - EXPLORER publishes web pages with embedded, highly compressed 3D models so you can share your 3D data with almost anyone – all they need to view your models is Internet Explorer. Rapidform's ICF compression technology compresses models to as little at 3% of their original size without any loss of geometry
Vendor by: INUS Technology
Website: http://www.rapidform.com/
admin
| 5/15/2009 | 405
Views
|
|
| |
|
PolyWorks/IMView
(http://www.innovmetric.com/polyworks/3D-scanners/viewer.aspx ?lang=en )
|
|
Vendor description: PolyWorks/IMView is a free viewer utility that reads existing PolyWorks inspection projects and allows users to share PolyWorks projects with colleagues, customers, and suppliers.
Features:
- Visualize measurement results in 3D and use the mouse to rotate or translate the 3D scene or zoom on a specific area
- Perform basic interactive measurements, such as distances, radii, angles, and cross-sections
- Generate customized inspection reports in Adobe PDF, Excel, Word, or HTML formats
The PolyWorks/IMView utility can easily be installed on any network of computers running professional Windows operating systems.
Vendor by: InnovMetric Software
Website: http://www.innovmetric.com/polyworks/3D-scanners/home.aspx
admin
| 5/21/2009 | 304
Views
|
|
| |
|
TopSolid Viewer 2009
(http://www.topsolid.com/download/free/download_topsolid_view er.asp )
|
|
HTML clipboard Vendor description: TopSolid Viewer 2009 v6.10 is a free plug-in for viewing
any TopSolid documents like designs, drawings and kinematics, without the need
to have the application itself installed. With TopSolid Viewer you can forward
documents to external partners who do not use TopSolid without converting the
files into a neutral format such as IGES or STEP.
TopSolid Viewer also supports the new .TopViw format with which you can only
store the graphical representation of a documents.
TopSolid Viewer features several functions for print and review and allows
the user to add notes. Therefore, the files can be returned with comments that
are integrated in the graphical display.
Vendor by: Missler Software
Website: http://www.topsolid.com/
admin
| 5/28/2009 | 453
Views
|
|
| |
|
GLview 3D Plugin
(http://ceetron.com/en/glview_3d_plugin1.aspx)
|
Vendor description: GLview 3D Plugin is a free 3D viewing component enabling presentation of real analysis data generated by GLview Inova or the GLview Express Writer. The plug-in can be embedded into MS PowerPoint presentations and into web environments (MS Internet Explorer) and enables full 3D interactivity and high performance graphics. GLview 3D Plugin can read encrypted VTF and VTFx files, that can be created using GLview Inova or the GLview Express Writer. The files can contain the 3D model, selected scalar and/or vector results, display and animation settings, feature extractions (iso-surfaces, cut planes, particle traces) and annotations.
The plug-in is great for marketing and client promotion, and for distributed analysis environments. The plug-in has the same functionality as GLview Express, but is only available on Windows.
Vendor by: Ceetron
Website: http://ceetron.com/en/
admin
| 7/8/2009 | 395
Views
|
|
| |
|
CADVANCE View
(http://www.cadvance.com/cv_view.htm)
|
Vendor description: CADVANCE View is a program to view .VWF drawing files. This program does not support printing functionality.
Vendor by: Furukawa Information Technology
Website: http://www.cadvance.com/index.html
admin
| 6/4/2009 | 430
Views
|
|
| |
|
XpresReview 8
(http://www.plm.automation.siemens.com/en_us/campaigns/xpresr eview/index.cfm )
|
|
Vendor description: XpresReview is an electronic design review solution that allows you to easily share multiple documents in a collaborative environment. Supported by NX and Solid Edge, XpresReview easily combines 3D models and other associated documents into a single package, so participants in your review process have all the information they need to communicate effectively.
XpresReview takes advantage of Siemens PLM software's packaged collaboration files, an innovative and popular concept that allows documents from different sources to be packaged into a single file.
Package files, created using NX, Solid Edge or Insight Connect, can contain a broad range of documents, including:
- 3D models, including Product & Manufacturing Information (PMI)
- 2D drawings
- Microsoft Office documents (e.g. Word, Excel, PowerPoint)
- Adobe PDFs
- Image Files (e.g. TIF, JPG, BMP)
- AVI Movie Files (e.g. AVI, MPEG, WMV)
Recipients of the package can use XpresReview to quickly and easily interrogate its contents. XpresReview includes intuitive tools for:
- Viewing - Navigate 2D drawings and 3D models
- Measurements - Check dimensions for 2D drawings and 3D models
- Mark up - Use highlights to draw attention to specific areas and add text comments
- Section Views - Create interactive clipping planes to view the interior of 3D models
The files can then be repackaged for return to the originator or the next person in the review process, keeping your projects on time and avoiding late surprises.
Experience the benefits of sharing complete contextual packages of design data with your partners and suppliers. XpresReview is a stand-alone product and, for no charge, gives you the ability to view, interrogate and markup package files.
Vendor by: Siemens Product Lifecycle Management Software
Website: http://www.plm.automation.siemens.com/en_us/index.shtml
admin
| 6/16/2009 | 516
Views
|
|
| |
|
GLview Express
(http://ceetron.com/en/glview_express1.aspx)
|
|
Vendor description: GLview Express is a free, stand alone 3D viewer for presentation and distribution of 3D models and results generated by GLview Inova or the GLview Express Writer. The product enables full 3D interactivity and high performance graphics.
GLview Express can read encrypted VTF and VTFx files, which can contain the model geometry, scalar and/or vector results, display attributes, animation settings, feature extractions (iso-surfaces, cut planes, particle traces) and annotations.
In version 8 of GLview Express, support for password protected and encrypted VTFx files was added. In addition, relative result values is supported to enable protection of secret and sensitive result data.
GLview Express is a great marketing and communication tool and is available on Windows, UNIX and Linux platforms, supporting both 32-bit and 64-bit architectures.
Vendor by: Ceetron
Website: http://ceetron.com/en/
admin
| 6/24/2009 | 418
Views
|
|
| |
|
RADF Viewer
(http://www.spatial.com/webform/radf-viewer)
|
|
Vendor description: RADF Viewer provides real-time collaborative viewing of ACIS part files (.sat/.sab) and assembly files (.asat/.asab). Based on ACIS 3D Modeler R20 and HOOPS 3D application framework (HOOPS/3dAF) V17, the RADF Viewer makes available viewing of multiple documents simultaneously, a tree-view for data-representation, highlighting and selection and global application options for customized view settings.
Vendor by: Spatial Corporation
Website: http://www.spatial.com/
admin
| 6/25/2009 | 512
Views
|
|
| |
|
AGI Viewer
(http://www.agi.com/products/viewer/)
|
Vendor description: AGI Viewer is a free application that offers anyone a full understanding of complex STK analyses and mission studies through an interactive environment in 4D. This product allows users to control animations, select preset viewpoints and camera paths, and record movies. To enhance reports and presentations, AGI Viewer can also be embedded as an ActiveX control in any Microsoft COM-compliant application such as Microsoft PowerPoint, Word, or Excel. AGI Viewer is now even more powerful. You can publish your STK scenarios with multiple 3D windows and include user-defined STK reports. Viewer users can also manage their globe, add new geospatial content, and save their changes.
Vendor by: Analytical Graphics
Website: http://www.agi.com/
admin
| 7/1/2009 | 830
Views
|
|
| |
|
CurveStitcher
(http://www.smustard.com/script/CurveStitcher)
|
Vendor description: CurveStitcher is a plug-in for Google SketchUp which creates edges & faces between two selected curves.
Vendor by: Smustard
Website: http://www.smustard.com/
admin
| 8/18/2009 | 418
Views
|
|
| |
| In
category CAE Programs |
| |
|
SymLab
(http://www.symscape.com/product/symlab)
|
|
Vendor description: SymLab is an easy to use, cross-platform, 3D CAE fluid flow simulation system with advanced visualization features. It is ideal for free sharing and interactive viewing of 3D sym and brep model files.
Using SymLab add-ons you can create any 2D or 3D geometry or import your geometry from another CAD package. Then simulate how a gas or liquid will flow over and through your geometry. Capable of showing results as you modify your model in real time.
To realize SymLab's full geometry creation and simulation capabilities, i.e., to generate sym files for your own designs, you will need to expand with free add-ons from Symscape.
Vendor by: Symscape
Website: http://www.symscape.com
admin
| 4/9/2009 | 558
Views
|
|
| |
| In
category CAM Programs |
| |
|
Bar Cut Optimizer & Manager
(http://www.binrace.com/download.php?file=setup.exe)
|
Bar Cut Optimizer & Manager is a length nesting optimizer and stock manager software. It minimizes the wasted materials in the cutting process of any linear material like pipes, bars, tubes, profiles, paper rolls, extrusions, beams, cables etc.
admin
| 12/31/2007 | 2012
Views
|
|
| |
|
AutoEditNC
(http://www.betatechnical.com/autonc.htm)
|
|
AutoEditNC is 32-bit Windows program to assist in the creation and testing of Numerical Control programs in the Fanuc/G&M-Code format. AutoEditNC has specialized text editor with NC code creation tools. Also simulate the movements of the machine tool to test program for accuracy and reliability.
Serves as learning tool for programmers. It contains code creation windows that give brief explanation of code and allows the user to insert the code directly into program. It gives tools that make it easy to get started and easy to remember the arcane codes used in G&M-Code programs.
Features:
Enhanced manufacturing calculator with trig, speeds, feeds, unit conversions, machining power and more
Improved editor with formatting and search functions
Roughing program for rectangular and circular areas
Simulation window to test toolpaths for milling, allows the user to pan, scale, and step forward or backward through a program with refreshed graphics
Window 95/NT compatible
Code insertion tools with code examples
Built-in program templates to get started quickly
Renumbering tool
Improved help files
Sample files
Numerous bugs fixed
Vendor by: Beta Technical Solutions
Website: http://www.betatechnical.com/index.htm
admin
| 7/31/2008 | 1150
Views
|
|
| |
|
CncSimulator
(http://www.cncsimulator.com/)
|
The CncSimulator provides you with one of the most advanced yet easy-to-learn CNC Simulation software on the market. It has full 2D and 3D simulation of both turning and milling machines. With the CncSimulator you have the perfect tool for both industrial simulations as well as for training. Some of the CncSimulator's capabilities:Plug-in interface for developers.Simulation in 2D and 3D of both mill and lathe nc-code. 3D Block graphics. Advanced NC Editor, complete with machine communications. Simulation of machine time to aid in the calculation of costs etc. And a lot more...
Vendor by: CNC Simulator
Website: http://www.cncsimulator.com/index.php
admin
| 6/12/2008 | 1063
Views
|
|
| |
|
DNC Precision Free
(http://www.aggsoft.com/dnc-precision/download.htm)
|
The free version of DNC Precision software is a our best offer. It is the communications program specially developed to exchange data and programs between a computer and any Numerical Control (NC) machine. The program makes it possible to send and receive programs written in the machine language free of charge!
Vendor by: AGG Software
Website: http://www.aggsoft.com/
admin
| 9/1/2008 | 900
Views
|
|
| |
|
FeatureCAM
(http://www.featurecam.com/general/downloads/software_dl.asp)
|
|
FeatureCAM is a suite of CAD/CAM software which combines cutting edge technology with ease of use. Automates machining and minimizes programming times for parts on mills, lathes and wire EDM.
Feature-based technology to streamline programming
With FeatureCAM, you can : • Draw or import your part • Identify part components as features (holes, pockets, surface milling, etc) • Click simulation • You are done, NC code is generated!
Knowledge-based technology to increase productivity
FeatureCAM automatically : • Selects tools • Calculates feeds and speeds, including stepovers and depth of Cut • Determines roughing and finishing operations • Generates toolpaths and NC code • You can change any of the automatically selected machining suggestions.
Added value at no additional charge
FeatureCAM includes: • Shared network databases for tools and feeds and speeds • Post processor library with 350+ posts, with the ability to create custom Posts or edit existing posts • Feed rate optimization • Application programming interface (API) for Macro creation and program customizations • Job quoting tools • Integrated 3D simulation package
Vendor by: Delcam
Website: http://www.featurecam.com/index.asp
admin
| 7/31/2008 | 1507
Views
|
|
| |
|
FreeMill
(http://www.mecsoft.com/Mec/Products/FreeMill.shtml)
|
Vendor description: FreeMill is a fully functional 3D Milling package built on MecSoft Corporation’s VisualMill CAM package. With this product you will be able to import files VisualMill 4.0, STL, Rhino .3dm, VRML and Raw Triangle files, run full simulations on your part models and be able to output G code to your machine tool. The product comes with about 50 pre-built post-processors.
Vendor by: MecSoft Corporation
Website: http://www.mecsoft.com/Mec/
admin
| 6/26/2008 | 1331
Views
|
|
| |
|
G-Simple v2.05
(http://www.gsimple.eu/download.html)
|
|
Vendor description: G-Simple v2.05 is a simple CAM for 3 axis machining centers.
Latest release includes:
- New inch mode
- Selectable excess material removal filter
- New tools and materials library
- Undo/redo features
- Configurable postprocessor
- Move, turn, mirror, scale
- Milling parameters selectable individually for every entity
- Text compressing/expanding
- Text justification
Vendor by: GSIMPLE
Website: http://www.gsimple.eu/index.html
admin
| 3/31/2009 | 582
Views
|
|
| |
|
G-Simple v2.03
(http://www.gsimple.eu/download.html)
|
|
G-Simple is a simple CAM for 3 Axis Machining Centers.
Version 2.03 includes:
- Undo/Redo
- Configurable postprocessor (GSPOST.EXE Version 0.51)
- Move, turn, mirror, scale
- Milling parameters selectable individually for every entity
- Text compressing/expanding
- Text justification
Vendor by: GSIMPLE
Website: http://www.gsimple.eu/index.html
admin
| 5/22/2008 | 697
Views
|
|
| |
|
SolidCAM2007 Demo version
(http://www.solidcam.com/downloads_files_en,2712,7494,liste.h tml )
|
|
Vendor description: SolidCAM is the complete, Manufacturing Suite for efficient and profitable CNC-Programming inside SolidWorks.
SolidCAM2007 Demo version. The Demo version has all the functionality of the regular version except that it cannot generate G-Code for the CNC machine. It can read SolidCAM CAM-Parts created in regular version and simulate them. SolidCAM CAM-Parts created in the Demo version cannot be loaded in the regular version.
Demo version are available in different language for download.
Vendor by: SolidCAM
Website: http://www.solidcam.com/index_en.html
admin
| 4/23/2008 | 558
Views
|
|
| |
|
EasyBlank
(http://www.easystamping.com/index.php?option=com_content&tas k=view&id=10&Itemid )
|
|
The purpose of the EasyBlank software is to calculate blank shapes from 3D CAD files of sheet metal stamped parts. The calculated blank shape is then nested and optimized into a coil layout, estimating material costs for sheet metal tooling projects.
EasyBlank uses a one step calculation to turn complex 3D part designs into flat patterns, in just seconds. The entire process, from CAD import to results on the screen, typically takes less than three minutes.
Vendor by: AutoForm
Website: http://www.easystamping.com/products&services
admin
| 10/23/2008 | 329
Views
|
|
| |
|
ArtCAM Insignia 2009
(http://www.artcaminsignia.com/demo/index.htm)
|
|
Vendor description: ArtCAM Insignia 2009 is part of the ArtCAM family of products and is a unique software program that lets you manufacture high quality 2D products from conceptual sketches or pictures faster.
Enables you to easily manufacture your models with it’s easy to use, highly proficient 2D and 2.5D (V-Bit) machining strategies. You can work directly from your sketches or imported images to build up a multilayered vector model, or use customizable vector libraries.
The flexible machining strategies provide the complete solution for all your 2D and 2.5D CNC needs. Proven solution for many industries including: Sign making, woodworking, Engraving, mold tool engraving.
Benefits:
- Add complex decoration or logos to products to increase their value
- Reduce production costs and improve quality by getting "finished" parts directly off your machine, removing the need for hand finishing
- Increase profit on materials through nesting and toolpath ordering options
- Increases productivity leading to a higher and faster return on your CNC investment
- Get optimum use from the most advanced features
- Create more profit from your CNC investment by increasing its efficiency with better toolpath control
- Better throughput and less down time means you can bid for more work, subcontract for others or have more time for leisure activities
Allows you to produce high quality, detailed and intricate designs and enables you to have shorter delivery times and more competitive pricing.
Demo version of ArtCAM Insignia 2009 will give you complete access to all of the software's features, with the only limitation being that you are unable to save your files.
Vendor by: Delcam
Website: http://www.delcam.com/index.asp
admin
| 3/25/2009 | 1300
Views
|
|
| |
|
VisualMILL 6.0
(http://www.mecsoft.com/Mec/Downloads/downloadvm6demo.shtml)
|
|
Vendor description: VisualMILL 6.0 is a general purpose machining program. Packed with sufficiently powerful manufacturing methods.
VisualMILL 6.0 package is ideal for mold, die and tooling, wood working rapid-prototyping and general machining markets.
Evaluation product is the same as the commercial product except that part files cannot be saved and toolpaths cannot be post-processed.
Vendor by: MecSoft Corporation
Website: http://www.mecsoft.com/index.shtml
admin
| 3/25/2009 | 884
Views
|
|
| |
|
i-Know Moulding v1.6
(http://www.ccim.nl/download.html)
|
|
Vendor description: i-Know Moulding v1.6 supports your design verification, customer communication, mould quotations, production planning and tool engineering.
i-Know Moulding offers instant mould previews for each stage of product development. Use automatic mould preview for feedback within seconds on any 3D design. Use an extended manual editing modes to plan your mould design process in detail.
i-Know Moulding can be used in any stage of product design to check the mouldability of your design.
Features:
- Import any 3D model as STL
- Mould creation in single click
- Identify possible tooling problems
- Customize the mould geometry
- Export results in 3D or 2D
- Extract parameters for mould price calculations
Vendor by: CCIM
Website: http://www.ccim.nl/index.htm
admin
| 3/31/2009 | 485
Views
|
|
| |
|
Geomagic Review
(http://www.geomagic.com/en/products/qualify/review/index.php
)
|
|
Vendor description: Geomagic Review is a inspection analysis software that works with Geomagic Qualify. Inspection results and analysis generated by Geomagic Qualify, such as GD&T analysis, 2D and 3D comparisons can be shared with Geomagic Review. Features: - Improve quality inspection efficiency
- Communicate and collaborate on the inspection process
- Maximize your software at no extra cost
Vendor by: Geomagic
Website: http://www.geomagic.com/en/
admin
| 3/31/2009 | 476
Views
|
|
| |
|
Mach3
(http://www.machsupport.com/downloads.php)
|
|
Vendor description: Mach3 is a PC-based CNC software. Mach3 is limited to 500 lines of G-code until licensed.
Mach3 is used to control the following types of equipments.
- Lathes
- Mills
- Lasers
- Plasma
- Engravers
- Gear cutting
Features:
- Convert a standard PC to a fully featured, 6-axis CNC controller.
- Allows a direct import of DXF, BMP, JPG and HPGL files through LazyCam
- Visual G-code display
- Generates G-code via LazyCam (importer included with Mach3) or Wizards add-in programs
- Fully customizable interface
- Customizable M-codes and macros using VBscript
- Spindle speed control
- Multiple relay control
- Manual pulse generation
- Video display machine
- Touch screen ability
- Full screen eligibility
Vendor by: ArtSoft - Newfangled Solutions
Website: http://www.machsupport.com/
admin
| 5/7/2009 | 740
Views
|
|
| |
|
InventorCAM2008 R12 Demo
(http://www.inventorcam.com/downloads_files_en,2712,7494,list e.html )
|
|
Vendor description: InventorCAM2008 R12 Demo is the complete, seamlessly integrated manufacturing suite for efficient and profitable CNC programming inside Autodesk Inventor. InventorCAM provides seamless single-window integration and full associativity with the Inventor design models.
InventorCAM is used in the mechanical manufacturing, electronics, consumer products, medical, machine design, automotive and aerospace industries, in mold, tool and die and rapid prototyping shops.
The demo version of InventorCAM2008 R12 allows you to enjoy the full functionality of InventorCAM with only two limitation: you cannot generate G-code with it and you cannot edit CAM parts created in the demo-version with the regular version of InventorCAM.
Demo version downloads available in various languages.
Vendor by: SolidCAM
Website: http://www.inventorcam.com/index_en.html
admin
| 5/20/2009 | 443
Views
|
|
| |
|
G-ZERO Mill Student Version
(http://www.g-zero.com/1157/index.html)
|
|
Vendor description: G-ZERO Mill Student Version is a conversational CAM Software that lets you program parts from blueprints or CAD files, and convert them into NC format (g-code files).
Student version includes a 90-day trial of CAD reader, solid verification, advanced 4-axis viewer and tombstone wizard. System required: Windows 98SE or newer.
For download details and warning, check on vendor's site.
Vendor by: Rapid Output
Website: http://www.g-zero.com/1001.html
admin
| 6/4/2009 | 438
Views
|
|
| |
|
G-ZERO Lathe Student Version
(http://www.g-zero.com/13301/index.html)
|
|
Vendor description: G-ZERO Lathe Student Version is a conversational CAM Software that lets you program parts from blueprints or CAD files, and convert them into NC format (g-code files).
Student version includes a 90-day trial of CAD reader, solid verification. System required: Windows 98SE or newer.
For download details and warning, check on vendor's site.
Vendor by: Rapid Output
Website: http://www.g-zero.com/1001.html
admin
| 6/10/2009 | 539
Views
|
|
| |
| In
category CAD Programs - Mac |
| |
|
LXFree
(http://www.claudeheintzdesign.com/lx/lxfree.html)
|
|
Vendor description: LXFree is a special purpose CAD/database application designed to integrate the process of drawing a light plot with creating the necessary paperwork. LXFree combines typical drawing tools with databases of the properties of lighting instruments, colors, symbols and other libraries. LXFree’s libraries are in open XML format and LXFree includes extensive AppleScript support allowing expansion and customization of its capabilities.
LXFree is a Mac OS universal binary application.
Vendor by: Claude Heintz Design
Website: http://www.claudeheintzdesign.com/lx/index.html
admin
| 2/18/2009 | 640
Views
|
|
| |
|
Cheetah3D Demo Version
(http://cheetah3d.com/download.php)
|
|
Vendor description: Cheetah3D demo version is a lean, fast, and elegant 3D modeling, rendering, and animation package with an easy learning curve. It was written from ground up in cocoa and offers many powerful tools like subdivision surface modeling, joint based character animation system, morph targets, UV unwrapping, texture painting, PDF import, HDRI, radiosity, renderings, etc. The possibility to extend Cheetah3D with JavaScripts and support for many common file formats rounds out its feature set.
Demo version of Cheetah3D for free to use and learn, but to save any of your documents, you'll need to purchase a serial number.
Vendor by: Cheetah3D
Website: http://cheetah3d.com/index.php
admin
| 2/18/2009 | 767
Views
|
|
| |
|
CB Model Pro
(http://www.cbmodelpro.com/download.html)
|
|
CB Model Pro is a easy to use 3D modeling tool utilizing cutting-edge freeform surface technology.
Features:
- Clean, clear intuitive interface
- Simple, precious tools enabling direct surface manipulation
- Create realistic models and characters
- Export output compatible with most popular programs
Available for Windows and Mac OS.
Vendor by: Dassault Systems
Website: http://www.cbmodelpro.com/index.html
admin
| 4/21/2009 | 809
Views
|
|
| |
| In
category EDA Programs |
| |
|
ECAD Pro
(http://pcbdesignandfab.com/download.htm)
|
|
Vendor description: ECAD Pro is PCB design software, supports up to 32"x 32" PC board and up to 256 layers. It has support for surface mount devices including footprint mirroring. It allows designers to interactively and automatically check for errors and design rules while editing. Includes features like high-end packages.
Benefits to designers:
- No software purchase investment
- No software upgrade/update investment
- Use latest software version each time you design or update design
- Benefit of expanded component library as newer parts are added to symbol library
- Single source for design through prototype boards
Vendor by: PCB Design and Fab
Website: http://www.pcbdesignandfab.com/
admin
| 8/14/2008 | 468
Views
|
|
| |
|
ExpressSCH
(http://www.expresspcb.com/ExpressPCBHtm/Free_schematic_softw are.htm )
|
|
Vendor description: ExpressSCH is an electronics design software for drawing schematics is completely free, fully functional and easily installed. Run under Microsoft Windows NT, 2000, XP and Vista, Easy to learn and use.
Includes a large library with hundreds of component symbols (ICs, resistors, capacitors)use to draw your electronic circuits. Positioning of the components is easy. After completing schematic, it can be linked to circuit board layout file.
Vendor by: ExpressPCB
Website: http://www.expresspcb.com/index.htm
admin
| 9/18/2008 | 448
Views
|
|
| |
|
Pad2Pad
(http://www.pad2pad.com/download/index.htm)
|
Makes custom printed circuit boards with components completely via the Internet. Includes free software for PCB design and online pricing. Offers convenience and low cost.
Vendor by: Pad2Pad
Website: http://www.pad2pad.com/
admin
| 9/1/2008 | 665
Views
|
|
| |
|
Rimu PCB
(http://www.hutson.co.nz/rimupcb.htm)
|
|
Vendor description: Rimu PCB is a electronic printed circuit board layout software. Designed for ease of use. Rimu Schematic follows familiar concepts and commands used in many other Windows applications.
Features:
- Easy to use and cost effective
- Generates industry standard gerber, excellon and pick and place files for manufacture
- Can import a net list from your schematic, seven different formats supported
- Design rule checking - 32 rules in five categories
- Snap to objects, snap to grid and snap to guides for easy and accurate placement
- Comprehensive online help, includes tutorial and glossary of printed circuit board terms
- Multiple Undo / Redo command
- Automatic shape based power planes
- Extensive printing options and print preview
- Search libraries by part number and/or description
- New component footprints and libraries can be created and edited easily
- Floating/drop down palettes
- Windows MDI interface
- 32 bit application runs under Windows 98, NT4.0, 2000 and XP
Vendor by: Hutsun Systems
Website: http://www.hutson.co.nz/
admin
| 1/27/2009 | 491
Views
|
|
| |
|
DipTrace 2.0 Freeware
(http://www.diptrace.com/download.php)
|
|
Vendor description: DipTrace 2.0 freeware is a complete state-of-the-art PCB Design System. It includes:
- PCB layout — PCB design with an easy to use manual routing tools, auto-router and auto-placer
- Schematic — schematic capture and export to PCB or Spice
- Pattern editor — allows you to create part footprints
- Component editor — allows you to draw parts and make components
Features:
- Easy to learn user interface
- Smart placement and auto-placement features
- Easy to use manual and powerful automatic routing
- Shape-based copper pour
- Advanced Verification Features
- Import/Export Features
- Manufacturing output formats
- Producing PCBs using milling method
- Standard component libraries
Note - DipTrace 2.0 freeware includes all features, but has 250 pins limit, and to be used for non-profit work only.
Vendor by: Novarm Limited
Website: http://www.diptrace.com/index.php
admin
| 4/7/2009 | 505
Views
|
|
| |
| In
category FEA Programs |
| |
|
Static-Field Analysis Toolkit Educational 6. 2
(http://www.fieldp.com/sate.html)
|
Static-Field Analysis Toolkit Educational 6. 2 (SATE) includes 2D programs EStat and PerMag. The education programs have full capabilities but are limited to 12,500 nodes and 8 material regions. EStat determines electric fields in dielectric or conductive media. Advanced capabilities include support for anisotropic materials and the option to define continuous variations of potential, dielectric constant or conductivity from mathematical functions. PerMag covers all aspects of magnetostatics, including saturation effects in soft materials and permanent magnets with non-linear demagnetization curves. The package includes Mesh, an automatic conformal mesh generator with a built-in drawing editor and DXF import capability.
Website: http://www.fieldp.com/index.html
admin
| 11/13/2008 | 466
Views
|
|
| |
|
Analysis for Windows
(http://cuylaerts.net/)
|
Calculates 2D and 3D trusses and frames. The resulting forces and stresses are visualized for each member. All compressed members are tested for buckling.
Vendor by: Cuylaerts Engineering
Website: http://cuylaerts.net/
admin
| 12/31/1969 | 596
Views
|
|
| |
|
| |
|
| |
|
GetDP
(http://www.geuz.org/getdp/#Download)
|
Scientific computation software for the numerical solution of integro-differential equations, using finite element and integral type methods.
Website: http://www.montefiore.ulg.ac.be/~geuzaine/
admin
| 12/31/1969 | 366
Views
|
|
| |
|
Impact
(http://impact.sourceforge.net/)
|
Vendor description:Impact is an open source finite element program suite which can be used to predict most dynamic events such as car crashes or metal sheet punch operations. They usually involve large deformations and high velocities.Simulations are made on a virtual three dimensional model which can be created with a pre-processor or with the built-in Fembic language. Results are viewed in a post-processor.Impact is designed to interface with the included pre- and postprocessor by default, but there are also interfaces available for more advanced pre-and postprocessors such as GiD or Gmsh. Impact also has rudamentary support for Nastran file format. Impact is written in Java which means it can be run on most hardware and operating systems.
Vendor by: Impact
Website: http://impact.sourceforge.net/
admin
| 4/9/2008 | 379
Views
|
|
| |
|
| |
|
Mathcad - ESRD's StressCheck Integration
(http://www.ptc.com/appserver/wcms/forms/index.jsp?im_dbkey=6 3224&icg_dbkey=482 )
|
Reduce errors that result from manual transfer of data between applications by automatically exchanging data between Mathcad and ESRD's StressCheck Finite Element Analysis software for civil and structural engineering applications.
Vendor by: PTC
Website: http://www.ptc.com/
admin
| 9/11/2008 | 269
Views
|
|
| |
|
| |
|
OOF
(http://www.ctcms.nist.gov/~langer/oof/)
|
Object-oriented finite element analysis of material microstructures.
Vendor by: Center for Theoretical and Computational Materials Science
Website: http://www.ctcms.nist.gov/
admin
| 12/31/1969 | 335
Views
|
|
| |
|
| |
|
QuickField 5.5 Student
(http://quickfield.com/downloads/qf_stud.zip)
|
Vendor Description:QuickField is a Finite Element Analysis package for electromagnetic, thermal, and stress design simulation with coupled multi-field analysis.Student's QuickField is a free but full-featured analysis program with limited number of mesh nodes. You can use it to simulate simple engineering problems, to learn the main features of the Professional version, or, as a free viewer, to publish your design ideas accompanied by QuickField models.
Website: http://quickfield.com/
admin
| 3/28/2008 | 265
Views
|
|
| |
|
FEAPpv
(http://www.ce.berkeley.edu/projects/feap/feappv/)
|
|
' 'EAPpv is a general purpose finite element analysis program designed for research and educational use. 'EAPpv is designed to be compatible for compilation in UNIX/Linux and Windows PC environments. '
Vendor by: University of California
Website: http://www.ce.berkeley.edu/
admin
| 1/22/2009 | 610
Views
|
|
| |
|
JL Analyzer
(http://www.autofea.com/Download-FEA-software.htm)
|
|
JL Analyzer is a engineering solution, containing pre/post processors, CAD like geometry modeling, auto-mesh, and all analysis engines like static, frequency, buckling, dynamic, dynamic stress, spectrum, nonlinear, thermal, seepage, electric, and combination of them.
Free version of JL Analyzer perform all FEA functions of JL Analyzer professional for any geometry with a 300 nodes mesh limit.
Features:
- User-friendly and intuitive interface
- On-line help available
- Hint-window at any stage of modeling
- Easy to use in your design and analysis
- Multiple viewing options to examine results
Vendor by: AutoFEA
Website: http://www.autofea.com/index.htm
admin
| 3/26/2009 | 352
Views
|
|
| |
|
AnsKeys HotKeys v2.0
(http://www.padtinc.com/support/freesw/anskeys/default.htm)
|
|
Vendor description: AnsKeys HotKeys v2.0 is a Visual Basic program which will provide hot-keys for commonly issued commands and hide/unhide the ANSYS process status dialog box.
This program only works on PCs and has been tested with Windows and ANSYS 6.0/6.1/7.0. This version of allows full customization of all the keys.
Vendor by: Phoenix Analysis & Design Technologies
Website: http://www.padtinc.com/
admin
| 4/23/2009 | 420
Views
|
|
| |
|
xPSD
(http://www.padtinc.com/support/freesw/xpsd/default.htm)
|
|
Vendor description: xPSD is a tool that allows user to take the results of a standard modal analysis and conduct fast, flexible studies on the behavior of the structure under loading. Works with the latest version of the ANSYS general-purpose FE code.
xPSD uses the 'large mass method' to capture the modal response of a system to random vibration, expressed in terms of a 'Power Spectral Density' (PSD) input. The user can quickly specify many different PSD input curves and extract the response of the system. The goal of the tool is to provide a simple, but fast and accurate way for users to carry out PSD analyses.
Features:
- Supports single base excitation
- Utilizes a standard modal analysis (with large mass) as input
- Stores modal information in efficient binary file that is an order of magnitude smaller than the equivalent .RST modal result file
- User can request displacement, velocity, acceleration, or component stress response at any node
- User can request '1-sigma' displacement, velocity, acceleration, or component stress information for the entire model, or for sub-components of the model
- Response curves can be output for display in ANSYS or a spreadsheet
- '1-sigma' results can be output for contour display in ANSYS
- Entire process can be run from within ANSYS, interactively or in batch mode
- Input PSD and output request controlled by simple text file
Vendor by: Phoenix Analysis & Design Technologies
Website: http://www.padtinc.com/
admin
| 4/23/2009 | 416
Views
|
|
| |
|
PowerPoint VB Macro
(http://www.padtinc.com/support/freesw/pptinsert/default.htm)
|
|
Vendor description: PowerPoint VB Macro is a code routine to import ANSYS output into PowerPoint. Using macro speed up process significantly. You can run the macro by opening the macro menu (Alt-F8) in PowerPoint, and then running the 'insert' macro.
Following information should be entered into the dialog boxes, when prompted:
- Full path of the pictures to be imported
- Source file name (ANSYS increments filenames for pictures using sourcefilenamexxx)
- Types of files to import ( JPG, PNG, TIF)
- Starting slide position in the PowerPoint document (normally 1)
- Number of pictures to import
Vendor by: Phoenix Analysis & Design Technologies
Website: http://www.padtinc.com/
admin
| 4/30/2009 | 365
Views
|
|
| |
|
LISA 6.2.3
(http://www.lisa-fet.com/download.htm)
|
|
Vendor description: LISA 6.2.3 is a finite element analysis software. Model size in free version has 1300 node limit.
Features:
- Import AutoCAD, COSMOS files
- Classic FE modeling
- Pressure vessel component templates
- Hydrodynamic bearing modeler
- Display
- Polyline sketch tools
- Mesh generators
- Mesh refinement tools
- Extruded and resolved solids
- Color contour plot
- Numerical data
- Deformation display
- Animations
- Charts
- Tables
Vendor by: Sonnenhof Holdings
Website: http://www.lisa-fet.com/index.htm
admin
| 6/18/2009 | 448
Views
|
|
| |
| In
category MCAD Programs |
| |
|
iTweak for Inventor
(http://www.sdotson.com/vba.asp)
|
iTweak is a small application that allows the users to customoize some of the more hidden aspects of Inventor. Both R6 and R7 version are included in the zip file. Visit www.sdotson.com for lots more free Inventor Tools and Tutorials.
Vendor by: sDotson
admin
| 12/31/1969 | 369
Views
|
|
| |
|
KOMPAS-3D V10 LT
(http://ascon.net/download.php)
|
KOMPAS-3D V10 LT is a functionally reduced version of 3D solid modeling system. It is a perfect way for those who starts learning 3D, as well as for persons who would like to rise designer's skills or just try in use and familiarize with new, complex MCAD solution.
Light version of KOMPAS combines all basic features for classical parametric 3D modeling, 2D drafting, design, release of documentation and interactive learning system KOMPAS-ABC in one and allows designers worldwide to learn advantages of using professional MCAD software. KOMPAS-3D LT is available for users in two languages: English or German, and the main difference from commercial software is that free version does not allow 3D assembling. Useful system for students and 3D beginners, home usage and commercial testing.
Website: http://ascon.net/
admin
| 11/13/2008 | 365
Views
|
|
| |
|
3DVIA PrintScreen
(http://www.3dvia.com/products/3dvia-printscreen/)
|
3DVIA PrintScreen lets you save in 3D XML and share easily 3D models coming from any application based on OpenGL or DirectX.
3DVIA PrintScreen Highlights
1. Save 3D scene -: All on screen visible 3D shapes and textures can be saved. This is similar to the classical 2D print screen. 2. Share -: Easily incorporate models into technical documentation, maintenance manuals, marketing brochures, websites, email communications and many other everyday uses. Compliant with all applications reading 3D XML files. 3. Innovating -: 3D PrintScreen brings you for the first time and in one unique tool the ability to save 3D scenes from both OpenGL and DirectX applications. 4. Accessibility -: No 3D skills required. Everyone can now save and share 3D models, it is as simple as classical print screen usage. 5.Always active -: Once launched, the 3DVIA Printscreen application is always active and available on demand (on the right bottom corner). This application is non intrusive and low CPU consuming. 6. Openness -: Saved geometry is fully described in XML.Thus it can be easily read or written in your standard XML editor 7. 3D federation -: On-fly conversion towards 3D XML standard format. Allows you to federate your 3D data in one unique format
Vendor by: Dassault Systemes
Website: www.3ds.com
admin
| 7/11/2011 | 211
Views
|
|
| |
|
PowerSHAPE-e
(http://www.delcam.com/intlresp/powershape_dl.asp?from=PSHAPE
)
|
|
Vendor description: PowerSHAPE is a powerful hybrid solid, surface and wireframe modeller for the design of products with complex shapes. Can be used to design products from scratch, particularly those with sculptured shapes. It is also ideally suited to preparing existing product models for manufacture - by importing a model from another CAD system and adding features for manufacture such as fillets, split and draft surfaces.
PowerSHAPE-e is a free version of PowerSHAPE-Pro that can be used to evaluate design concepts, or share models with your supply chain. It is ideal for use in education for CAD teaching or research.Lets you design and share your design with others.
Vendor by: Delcam
Website: http://www.delcam.com/index.asp
admin
| 4/25/2008 | 621
Views
|
|
| |
|
DimName
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=76 )
|
Globally adds an ID number to all dimensions on a drawing, with an optional user specified tag.
Vendor by: handleman
Website: http://sw.fcsuper.com/index.php
admin
| 11/13/2008 | 203
Views
|
|
| |
|
AllCaps V3
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=15 )
|
Capitalizes selected annotaction notes, or if none is selected, capitalizes all annotation notes.
Vendor by: Matt Lombard, William Wicker, Matthew Lorono
Website: http://sw.fcsuper.com/index.php
admin
| 11/13/2008 | 238
Views
|
|
| |
|
2D to 3D Tool for Inventor
(http://labs.autodesk.com/utilities/2d_to_3d_tool/)
|
|
Vendor description: Save valuable time creating 3D models of parts that were designed in 2D with this add-in utility for Inventor. The 2D to 3D tool streamlines the preparation of 2D views by automatically rotating drawing views onto orthogonal sketches.
Note - Select and execute the installer intended for your system and application.
Website: http://labs.autodesk.com/
admin
| 9/18/2008 | 587
Views
|
|
| |
|
Autodesk Inventor LT
(http://labs.autodesk.com/technologies/inventor_lt/)
|
Vendor description: Autodesk Inventor LT Technology Preview 2008 makes it easy to create, share, and edit 3D part models from different CAD systems. Inventor LT helps reduce the hassles and headaches of working in an environment with many disparate CAD systems. It allows you to quickly import, export, create, and modify 3D part models in many common file formats to meet today’s increasing need for communicating in 3D.Autodesk Inventor LT Technology Preview delivers:-Multi-CAD translation capabilities for leading 3D file formats -3D part model creation and editing -Automated mechanical drawings -Genuine DWG interoperability -Photorealistic rendering
Vendor by: Autodesk
Website: http://labs.autodesk.com/
admin
| 3/27/2008 | 543
Views
|
|
| |
|
CoCreate Modeling Personal Edition
(http://www.cocreate.com/products/PE2/ModelingPE2.aspx)
|
Vendor description: CoCreate Modeling Personal Edition (PE) is the world's first free explicit 3D CAD software from PTC. Download it today, and get all the flexibility of standard CoCreate Modeling 3D CAD system free for assemblies up to 60 parts. Using CoCreate Modeling PE, you work directly on the geometry you want to modify and design your models without investing in upfront engineering. It’s easy to learn, helps you create lightweight designs fast, and responds to unforeseeable change requests easily, even if they came late in the development process. Plus, you can use it to create associative drawings automatically and analyze design ideas quickly. CoCreate Modeling PE puts the extraordinary power of explicit modeling into the hands of any engineer, designer, or student. Even casual users and hobbyists can use it for their home projects, especially with the help of our Quickstart projects, online help, and user forums. Note: Active internet connection required for product activation. Free registration required for download.
Vendor by: PTC
Website: http://www.ptc.com/
admin
| 4/16/2008 | 400
Views
|
|
| |
|
Feature Recognition Tool for Pro/ENGINEER
(http://www.ptc.com/products/proe/frt/index.htm)
|
|
Vendor description: FRT is a plug-in application for Pro/E Wildfire 4.0, design engineers have a comprehensive set of tools to selectively replace geometries representing features in imported solid boundary representation models (IGES, STEP, etc) with true parametric features.
FRT enables design engineers to build design intelligence into imported models for easy, predictable changes. For example, a user can replace hole geometry with a hole feature and use it down-stream for assembly, detailing, and manufacturing. The non-modifiable static geometry is replaced with a fully editable hole feature. FRT can even recognize and place patterns of features.
Capabilities:
- Identify and replace static geometry with feature rich content.
- Simple or sketched holes on flat or curved surfaces
- Protrusions or pockets on flat or curved surfaces
- Extruded slots
- Constant radius rounds
- Chamfers
- Table pattern for holes
- Easy – to – use action/object approach
- Select the desired feature search tool
- Then select the surface or edge to start the search from
- Have constant visual feedback during feature creation
Benefits:
- Facilitate down-stream re-use of imported models
- Rebuild flexibility into imported designs from a single, familiar modeling environment
- Increased efficiency over remastering 3D imported designs by hand
Vendor by: PTC
Website: http://www.ptc.com/products/proe/frt/index.htm
admin
| 9/4/2008 | 373
Views
|
|
| |
|
freeCAD
(http://www.ar-cad.com/products/freecad.html)
|
Vendor description: freeCAD is a basic 3D CAD with advanced motion simulation capabilities. It is suitable for anyone interested in learning 3D CAD and motion simulation for free before using more sophisticated packages. Educators, students and new engineers will find it ideal for the teaching and learning of geometry, kinematics, dynamics, vibrations, mechanisms, linkages, cams, machine design and physics. The program runs on Windows, Linux PC, Macintosh PPC and other Unix's. Assembly data are unchanged across platforms.freeCAD allows users to create and manipulate assemblies of parts. The parts are simple 3D solids, which can be connected by joints, constraints, contacts, motors, actuators, springs, dampers, forces, torques or gravity. The parts and connections define the structure, mechanism or machine of interest. Both open and closed 3D loops are permitted. freeCAD performs full multibody dynamics Analysis on the assembly to predict the motion according to Newton's Laws. Animation using the simulated data produces realistic dynamic behavior of the system.
Vendor by: AR-CAD
Website: http://www.ar-cad.com/index.html
admin
| 9/1/2008 | 593
Views
|
|
| |
|
GCRI for Pro/E
(http://www.ptc.com/products/granite/gcri/free-download.htm)
|
|
GCRI allows the Pro/E Wildfire 2.0 user to open Pro/E Wildfire 4.0 models.
Capabilities
- Read models generated in later releases into earlier releases (back to Pro/E Wildfire 2.0)
- Display and maintain the full feature tree in the earlier release
- Use later release models in downstream applications of earlier releases (analysis, mold design, routed systems, etc)
- Add features to later release models to support downstream application use
- Appending changes back to later release models to recover full model definition with no loss of design data
Benefits
- Clean translation into earlier release eliminates need to repair neutral format translations
- More modeling information is now available to earlier release users for clearer understanding of modeling intent
- Protects existing geometry and design intent from changes in the earlier release
- Improves supply chain interoperability by reducing the cases where all participants must use the same release of Pro/E
Vendor by: PTC
Website: http://www.ptc.com/
admin
| 9/4/2008 | 398
Views
|
|
| |
|
Interface for Rhino in Pro/ENGINEER
(http://www.ptc.com/products/proe/interface-for-rhino/index.h tm )
|
|
Interface for Rhino in Pro/ENGINEER allows Pro/ENGINEER users to import data directly from native Rhinoceros version 1.0 through 4.0 files. This processor imports boundary representation surfaces, facet data, curves, and colors from *.3dm files.
Capabilities
- Import native files from Rhinoceros versions 1.0 through 4.0
- Import datum curves, colors, boundary representation data and facet data
- Create separate import and facet features for boundary representation and facet data respectively within a single Pro/ENGINEER part
- Interpret Rhinoceros layers to create a flat Pro/ENGINEER assembly structure with individual parts for each Rhinoceros layer
Benefits
- Increased efficiency over neutral format (STEP, IGES) translation
- Represent Rhino data as a Pro/ENGINEER flat assembly structure
- Edit imported facet and boundary representation data independently, within the same part
This GRANITE based, import-only processor is introduced for Pro/ENGINEER Wildfire 3.0 (M140). The plug-in is included in the Pro/ENGINEER Wildfire 4.0 (M010 and later) installation
Vendor by: PTC
Website: http://www.ptc.com
admin
| 9/4/2008 | 351
Views
|
|
| |
|
Mathcad SolidWorks Integration
(http://www.ptc.com/appserver/wcms/forms/index.jsp?im_dbkey=6 3490&icg_dbkey=482 )
|
Vendor description: Mathcad SolidWorks integration provides users with an opportunity to combine both products, allowing SolidWorks dimensions to drive Mathcad calculations. The results of those calculations can then be sent back to SolidWorks to optimize the design.
Vendor by: PTC
Website: http://www.ptc.com
admin
| 9/4/2008 | 221
Views
|
|
| |
|
PowerSHAPE-e
(http://www.powershape.com/general/ps_download.asp)
|
|
Vendor description: PowerSHAPE-e is CAD design and modelling software provides complete environment to take your product ideas from concept to reality. If offers unrivalled freedom to manipulate surface form of the CAD model, to build from wireframe and make global changes with solid feature operations and editing. PowerSHAPE follows the philosophy of "Simple to create, easy to modify". PowerSHAPE includes all PowerSHAPE's core hybrid modelling tools as well as a number of features that are focused specifically upon the needs of designers.
PowerSHAPE-e is free version of PowerSHAPE-Pro that can be use to evaluate design concepts and share models with your supply chain. It is ideal for use for CAD teaching or research. Use to evaluate PowerSHAPE-Pro's functionality before buying. can export, import models using voucher system.
Create design using:
- Wireframe modelling
- Surface modelling
- Assembly modelling
- Triangle modelling
Vendor by: Delcam
Website: http://www.powershape.com/index.asp
admin
| 8/7/2008 | 997
Views
|
|
| |
|
Rhino Evaluation
(http://www.rhino3d.com/download.htm)
|
Vendor description: Fully functional version which will save 25 times. After that you can open and view files, and use Rhino's modeling, analysis, rendering tools - but it will not save. The evaluation version also supports plug-ins: Supported file formats include: DWG/DXF (AutoCAD 200x, 14, 13, and 12 ), SAT (ACIS), X_T (Parasolid), 3DS (3D Studio MAX), LWO (Lightwave), STL (Rapid prototyping), OBJ, AI (Adobe Illustrator), RIB (Renderman), POV & UDO (POV-RAY), VRML, STEP, VDA, GHS, SLC, IGES.
Vendor by: McNeel
Website: http://www.rhino3d.com
admin
| 9/1/2008 | 359
Views
|
|
| |
|
Shrinkwrap Add-in for Inventor
(http://labs.autodesk.com/utilities/inventor_shrinkwrap/)
|
|
Shrinkwrap is an Inventor Add-in to create envelope parts from Inventor assemblies.
Features:
Create substitutes for use with alternative representations in Autodesk Inventor
Reduce detail of production data to protect intellectual property
Create simplified data for complex purchased assemblies
Shrinkwrap Add-in for Inventor takes advantage of Inventor’s derived part workflows to create a standalone, single part solid version of a model assembly. Once the user identifies penetrations in components to be filled with solid material, Shrinkwrap Add-in for Inventor fills any internal voids that remain in the assembly.
Vendor by: Autodesk
Website: http://labs.autodesk.com/
admin
| 9/11/2008 | 375
Views
|
|
| |
|
KOMPAS-3D V9 LT
(http://ascon.net/download.php)
|
KOMPAS-3D V9 is intended for creating three-dimensional associative models for individual parts and assembly units containing both original and standardized structural elements. The parametric technology allows quickly obtaining models for typical products basing on a once designed prototype. Numerous service functions facilitate solving auxiliary designing and production maintenance problems. A key feature of KOMPAS-3D V9 is the use of its own mathematical core and parametric technologies developed by ASCON specialists. The basic problem being solved by the system is the modelling of products in order to considerably reduce the period of their designing and launch them into production as fast as possible. These purposes being reached by means of the following features: Fast creating of engineering and design documentation, necessary for production output (assembly drawings, BOM, detail drawings etc.)Translating geometry into design applicationsTranslating geometry into control-program development kits for NC-controlled equipmentCreating additional images (for example, for catalogue creation, for creating of illustrations of manuals etc.)The model export/import tools (KOMPAS-3D supports IGES, SAT, XT, STEP, VRML formats) provide functioning of complexes containing various CAD/CAM/CAE systems.The product modelling in KOMPAS-3D V9 can be carried out by various methods, namely: down-top modelling (using finished components), top-down modelling (designing components in the context of a specific design), modelling based on a layout outline drawing (for example, on a kinematic diagram) or a combination of modelling methods. Such ideology provides obtaining easily modifiable associative models.
Vendor by: ASCON
Website: http://ascon.net/download.php
admin
| 3/4/2008 | 360
Views
|
|
| |
|
AddViewLabel 1.20
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=71 )
|
Labels select drawing views with up to 2 lines of user entered text such as "ISOMETRIC VIEW" and the drawing view's scale (example: "SCALE: 1:1"), and allows for repeated operation. View labels are centered at the bottom of the selected views.
Vendor by: Matthew Lorono and Regg
Website: http://sw.fcsuper.com/index.php
admin
| 11/13/2008 | 247
Views
|
|
| |
|
SolidWorks Explorer
(http://www.solidworks.com/sw/products/free-cad-software-down loads.htm )
|
|
Vendor description: SolidWorks Explorer, the only CAD file manager that’s as intuitive as Windows Explorer, provides file management for SolidWorks files and is available at no cost. Users can manage relationships when copying or renaming SolidWorks files, perform a where used search, and search for SolidWorks files on criteria such as configurations and properties.
SolidWorks Explorer is available to both SolidWorks and non-SolidWorks users.
Vendor by: Dassault Systemes SolidWorks Corp
Website: http://www.solidworks.com/default.htm
admin
| 4/30/2008 | 334
Views
|
|
| |
|
3DVIA Shape
(http://www.3dvia.com/products/3dvia-shape/)
|
3DVIA Shape is a free online 3D modeling application that allows any user to create 3D models and publish them directly to 3DVIA.com.
admin
| 8/28/2008 | 5552
Views
|
|
| |
|
Alibre Design Xpress
(http://www.alibre.com/products/xpress/xpress_for_all.asp)
|
|
Vendor description: Alibre Design Xpress is a combination evaluation and learning tool. It's perfect for professionals looking to evaluate their CAD application options and for 3D.
Delivers you all the tools you need to evaluate with 3D CAD software for your business or to learn 3D modeling at your own pace.
Features:
Part Modeling
- Intelligent sketching with automatic constraint capture (i.e., horizontal, vertical, perpendicular, etc.)
- Feature-based modeling with parametric history
- Powerful feature creation tools: sweeps, lofts, helix, holes, etc
- Mirroring and pattern creation
Assembly Modeling
- Assembly constraints: mate, orient, align, etc. with auto-constrain mode
- Exploded views
- Interference checking, measurement tools, physical property calculator
2D Drawing and Detailing
- Automated generation of 2D drawings of parts and assemblies
- Change the model and the drawing updates and vice versa
- ISO and ANSI standard templates
- Orthographic views including front, top, right and iso with hidden line display
- GD&T symbols
- Redline markups
Alibre Design Xpress runs forever. During the first 30 days, you also get a free upgrade to Alibre Design Professional.
admin
| 4/24/2008 | 9065
Views
|
|
| |
|
VisMan3D
(http://home.planet.nl/~ammeraal/software/visman3d.zip)
|
|
VisMan3D (Visual Manipulation in 3 Dimensions) is a free 3D graphics program for simple and user-friendly solid modeling. Just unzip the downloaded file (in a new directory) to obtain an exe file and some examples of input files. You can load components from input files or generate them yourself and then combine them. For example, this is the way the input file japan00.dat was made. When you open this file, you see alltwelve components of a Japanese puzzle, of which a cube can be built. The files japan01.dat, japan02.dat, etc.show successive stages in this building process, resulting in japan13.dat, the complete cube. In a series of files like this (with two digits preceding ".dat" in the filenames) you can now press thekeys 'arrow right' and 'arrow left' to open the next or the previous file very quickly. Use animation by pressing the G key (or by using the Go command of the Animation menu). There is now a complete set of letter and digit objects, which you can use to compose text in three dimensions,such as the above image.
admin
| 12/31/1969 | 898
Views
|
|
| |
|
Volume in Feet
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=86 )
|
Vendor description: Creates a macro feature that automatically updates an associated custom property with the value of current volume of the part upon each rebuild.
Website: http://sw.fcsuper.com/index.php
admin
| 11/6/2008 | 203
Views
|
|
| |
|
ProductView Recipe Editor
(http://www.ptc.com/community/free-downloads.htm)
|
Vendor description: The Recipe Editor tool is intended for modifying the Client-side recipe files provided with Pro/E Wildfire. The recipe file defines the configuration of the ProductView format created from within Pro/E. For instance, publishing of certain model and feature types, levels of detail, file names, and many other options.
Vendor by: PTC
Website: http://www.ptc.com
admin
| 9/4/2008 | 356
Views
|
|
| |
|
| |
|
MaterialProperties
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=42 )
|
Vendor description: Provides a quick and consistent method for changing the material properties of a part model.
Vendor by: Leonard Kikstra
Website: http://sw.fcsuper.com/index.php
admin
| 11/6/2008 | 195
Views
|
|
| |
|
ISOView
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=62 )
|
|
Vendor description: This macro will add or update 8 named views in a SolidWorks model as follows:
Isometric based views: ISO right front, ISO left front, ISO left rear, ISO right rear.
Dimetric based views: DIM right front, DIM left front, DIM left rear, DIM right rear.
Vendor by: Leonard Kikstra
Website: http://sw.fcsuper.com/index.php
admin
| 11/6/2008 | 208
Views
|
|
| |
|
Advanced Simulation Technology Preview for Autodesk Inventor
(http://labs.autodesk.com/technologies/advanced_simulation)
|
|
Vendor description:The Advanced Simulation Technology Preview extends the simulation capabilities of Autodesk Inventor Simulation Suite 2009 and Autodesk Inventor Professional 2009.
Highlights:
Simulate Inventor parts and assemblies - Users can directly read in Inventor parts and assemblies and perform stress and modal analysis on them
Parametric simulation of Inventor models - The Advanced Simulation Technology Preview allows users to change parameters, simulate various permutations, and compare results
Multi-criteria optimization - Users can determine the optimal values of design parameters to meet their objectives using optimization
Automated tools to set up simulation model - Automated mesh refinement and contact detection allow users to quickly set up their simulation models and get usable results
Vendor by: Autodesk Labs
Website: http://labs.autodesk.com/
admin
| 11/6/2008 | 444
Views
|
|
| |
|
Center of Gravity
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=23 )
|
Vendor description: Creates a 3D sketch point at the Center of Gravity (Center of Mass) of a SolidWorks part.
Vendor by: Don Shoebridge, Chin Gengold, Matt Lombard
Website: http://sw.fcsuper.com/index.php
admin
| 10/30/2008 | 206
Views
|
|
| |
|
ConfigRipper
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=101 )
|
Vendor Description: ConfigRipper is plug-in for SolidWorks. Copies model's configurations to their own individual files. The new files will have the same name as their source configuration in the original model.
Vendor by: Jeff Parker
Website: http://sw.fcsuper.com/index.php
admin
| 10/30/2008 | 180
Views
|
|
| |
|
Coordinates of Point
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=69 )
|
Vendor description: Get X, Y, Z coordinates of a selection point and displays results in mm using SolidWorks.
Vendor by: handleman
Website: http://sw.fcsuper.com/index.php
admin
| 10/30/2008 | 242
Views
|
|
| |
|
Delete Unused Planes
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=41 )
|
Vendor description: Deletes all unused planes with a solid model, except for the three default planes using SolidWorks.
Vendor by: Chen Gingold
Website: http://sw.fcsuper.com/index.php
admin
| 10/30/2008 | 162
Views
|
|
| |
|
Presentation Studio
(http://labs.solidworks.com/Projects/PresentationStudio)
|
Vendor description: Presentation Studio is a 3D PDF creation add-in for SolidWorks. You can create a design brief, price sheet, technical summary, feature review, or product specification in minutes. But unlike ordinary PDF, an embedded 3D model conveys your design in a way 2D just can't. The PDF can then be read on any computer with Adobe Acrobat 8 or above.
Vendor by: SolidWorks Labs
Website: http://labs.solidworks.com/
admin
| 10/30/2008 | 349
Views
|
|
| |
|
Assembly Open
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=46 )
|
Assembly Open macro will open the owning part or subassembly if selected from the feature manager of anything selected in an assembly using SolidWorks.
Vendor by: Ted Griebling
Website: http://sw.fcsuper.com/index.php
admin
| 10/23/2008 | 209
Views
|
|
| |
|
Assembly Selection Macros
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=105 )
|
Vendor description: Assembly Selection Macros are two SolidWorks macros used in assemblies to improved selection abilities. One macro selects a component's assembly. The other selects all the components of the choosen assembly.
Vendor by: handleman
Website: http://sw.fcsuper.com/index.php
admin
| 10/23/2008 | 196
Views
|
|
| |
|
ComponentStateSwitcher
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=14 )
|
Vendor description: ComponentStateSwitcher SolidWorks VBA macro will display the state (suppress/resolve/hidden/shown) of each component in the top level of the current assembly. When user selects a component, the user will see a preview of the component. The user can then change the state of the selected component.
Vendor by: Leonard Kikstra, Alastair Cardwell
Website: http://sw.fcsuper.com/index.php
admin
| 10/23/2008 | 188
Views
|
|
| |
|
Reference Geometry Selection
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=50 )
|
Vendor description: Reference Geometry Selection is SolidWorks macro to select main reference geometry of an assembly component for easy mating by toggling through selecting origin and planes of selected component, while keeping other selections active. Good for mating component planes to each other or the assembly geometry. Update includes bug fixes and added constant controls to enhance functionality.
Vendor by: handleman
Website: http://sw.fcsuper.com/index.php
admin
| 10/23/2008 | 189
Views
|
|
| |
|
Various Mate Shortcuts
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=39 )
|
Various Mate Shortcuts are series of short macros of various common assembly mates in SolidWorks.
Vendor by: Matt Lombard
Website: http://sw.fcsuper.com/index.php
admin
| 10/23/2008 | 200
Views
|
|
| |
|
T-Splines 2.0 WIP 9
(http://www.tsplines.com/latestversion.html)
|
|
Vendor description: T-Splines 2.0 WIP 9 is plug-in for Rhino.
This is not the latest commercial update of T-Splines version 1. You should not use this work-in-progress (WIP) for production.
Here are the latest improvements:
- Rearranged toolbar
- T-Splines primitives
- A new subdivide face command
- Bugfixes, etc.
Vendor by: T-Splines
Website: http://www.tsplines.com/
admin
| 10/23/2008 | 353
Views
|
|
| |
|
Print3D for Alibre Design
(http://www.print3dcorp.com/)
|
Print3D for Alibre Design is easy way to send documents to printer, you can send your designs to the factory. With the free Print3D download, you can see the price of plastic and metal prototypes of your CAD project at anytime, directly from your favorite 3D modeler with its own rapid prototyping facilities, Print3D responds with fast, reliable delivery of your parts.
Vendor by: Print3D Corp
Website: http://www.print3dcorp.com/
admin
| 10/16/2008 | 275
Views
|
|
| |
|
RP Export for Alibre Design
(http://www.openrp.com/products/rp_export_ad/index.htm)
|
|
Vendor description: RP Export for Alibre Design is a free RP file export add-on. This add-on gives Alibre Design the ability to export 3D solid data from an Alibre Design part and assembly document to RP file.
RP Export for Alibre Design tessellates the solid bodies in a Alibre Design part or assembly document into individual triangular meshes. These meshes are then exported to RP file as mesh objects.
Easy to use tool. It adds new commands to Alibre Design. Once installed, it automatically loads itself into Alibre Design and adds a new submenu called 'RPExport' to the Alibre Design menu containing these new commands.
Vendor by: SYCODE
Website: http://www.sycode.com/
admin
| 10/2/2008 | 342
Views
|
|
| |
|
RP Export for Inventor
(http://www.openrp.com/products/rp_export_iv/index.htm)
|
|
Vendor description: RP Export for Inventor is a free RP file export add-in. RP Export for Inventor eliminates the need for RP Viewer for creating RP files.
RP Export for Inventor is very easy to use. Once installed, it automatically loads itself into Inventor and adds a new submenu called 'RPExport' to the Inventor menu.
Vendor by: SYCODE
Website: http://www.sycode.com/
admin
| 10/2/2008 | 299
Views
|
|
| |
|
RP Export for SpaceClaim
(http://www.openrp.com/products/rp_export_sc/index.htm)
|
|
Vendor description: RP Export for SpaceClaim is a free RP file export add-in. This add-in gives SpaceClaim the ability to export 3D solid and surface data from a SpaceClaim part or assembly document to an RP file.
RP Export for SpaceClaim tessellates solid bodies in a SpaceClaim document into a set of triangular meshes. These meshes are then exported to RP file as mesh objects.
RP Export for SpaceClaim is very easy to use. It adds new commands to SpaceClaim. Once installed, it automatically loads itself into SpaceClaim and adds a new ribbon bar to SpaceClaim called 'RPExport' containing the newly added commands.
Vendor by: SYCODE
Website: http://www.sycode.com/
admin
| 10/2/2008 | 314
Views
|
|
| |
|
RP Export for Solid Edge
(http://www.openrp.com/products/rp_export_se/index.htm)
|
|
RP Export for Solid Edge is a free RP file export add-in. This add-in gives Solid Edge the ability to export 3D solid data from a Solid Edge part and assembly document to a RP file.
RP Export for Solid Edge reads the solid models from the current Solid Edge part or assembly and writes them as mesh objects in RP file. RP Export for Solid Edge is very easy to use. Once installed, it automatically loads itself into Solid Edge and adds a new submenu called 'RP Export for Solid Edge' to the Solid Edge Add-ins menu.
Vendor by: SYCODE
Website: http://www.sycode.com/
admin
| 10/2/2008 | 320
Views
|
|
| |
|
| |
|
DocActivation
(http://www.3dcontentcentral.com/macros/17/files/secure/downl oad-macro.aspx?id=6589# )
|
|
Vendor Description: DocActivation macro allows user to view all open and visible documents within SolidWorks, and to activate the document of their choice, including an option to flip through open documents.
Two versions included:
- DocActivation.swp - Shows all open and visible documents
- DocActivationAllOpen.swp - Shows all open documents
Vendor by: Dassault Systems - 3D ContentCentral
Website: http://www.3dcontentcentral.com/default.aspx
admin
| 12/18/2008 | 233
Views
|
|
| |
|
| |
|
| |
|
Print3D plug-in for Inventor
(http://www.print3dcorp.com/)
|
|
Vendor Description: Users of Autodesk Inventor can now receive instant quotes for plastic or metal versions of their 3D models through a one-click command on the Inventor file menu.
Print3D plug-in integrates a pricing engine into Inventor that instantly calculates guaranteed part quotes for every component of a CAD assembly. Designers can also order production and next-day delivery of the parts directly from the Inventor environment.
Vendor by: Print3D
Website: http://www.print3dcorp.com/
admin
| 12/18/2008 | 364
Views
|
|
| |
|
Treehouse
(http://labs.solidworks.com/Products/Product.aspx?name=treeho use )
|
|
Vendor description: Treehouse allows you to plan out how your assembly will be arranged before you actually start designing components. Enables you to name your components and add custom properties all before creating a single document.
Drag visual representations of your SolidWorks templates to build a hierarchy of assemblies, parts and drawings. Rearrange the documents by simply dragging documents to their updated position in the tree. Fill in any custom properties defined on the document templates.
Once you are satisfied with your layout, you can export the hierarchy to SolidWorks documents. Treehouse will automatically create SW documents in the location you specify. These documents will reference each other according to the structure defined in Treehouse. You can now start filling in your design or check the documents into your PDM system to be filled in later.
Prerequisites:
- Requires SolidWorks 2008 or 2009 to be installed
- Requires .NET Framework 3.0 to be installed
Vendor by: SolidWorks Labs
Website: http://labs.solidworks.com/
admin
| 1/8/2009 | 276
Views
|
|
| |
|
Print3D for Solid Edge
(http://www.print3dcorp.com/)
|
|
Vendor Description: Users of Solid Edge can now receive instant quotes for their 3D models through a one-click command on the Solid Edge file menu.
Print3D plug-in integrates a pricing engine into Solid Edge that instantly calculates guaranteed part quotes for every component of a CAD assembly. Designers can also order production and next-day delivery of the parts directly from the Solid Edge environment
Supports DWG and DXF file formats, Solid Edge user can use free Print3D Solid Edge add-in to read the DWG file and create an instant offline quote without transmitting the DWG data across the internet.
Vendor by: Print3D
Website: http://www.print3dcorp.com/
admin
| 1/8/2009 | 984
Views
|
|
| |
|
Edit Linear Patterns - SolidWorks
(http://www.3dcontentcentral.com/macros/Models/macro.aspx?id= 9054# )
|
|
Vendor description: SolidWorks macro when run in part files will traverse the feature tree looking for linear pattern, if found it will load a property page and the user will be able to modify the distances or instances. If run in an assembly files it will look for component patterns and then look in each dependant files for feature pattern.
Vendor by: Dassault Systems
Website: http://www.3dcontentcentral.com/default.aspx
admin
| 1/8/2009 | 243
Views
|
|
| |
|
Drawing Tube
(http://labs.solidworks.com/Products/Product.aspx?name=drawin gtube )
|
Vendor description: Drawing Tube widget can manage SolidWorks utilities 'Drawings Now' and 'BluePrint Now' content, right from your desktop. Drag drawing files onto this widget to upload them to your account. Quickly share your files with others, edit in a web browser, or just delete them if you're cleaning house. This widget runs on top of the Yahoo widget engine.
Vendor by: SolidWorks Labs
Website: http://labs.solidworks.com/
admin
| 1/15/2009 | 275
Views
|
|
| |
|
Tagger
(http://labs.solidworks.com/Products/Product.aspx?name=tagger
)
|
|
Vendor description: SolidWorks utility to improve communication with colleagues and business partners by injecting relevant information into design files. Open an assembly, part, or drawing, and see a list of tags used in that document in a dedicated tab in the task pane. Click on a term to highlight features in the design that are tagged with that term. Any feature can have any number of tags of any nature, easing search, retrieval, annotation and communication. Users can create favorite tags they can easily apply to any feature at any time.
Requires SolidWorks 2008 or 2009.
Vendor by: SolidWorks Labs
Website: http://labs.solidworks.com/
admin
| 1/15/2009 | 250
Views
|
|
| |
|
Print3D for Alibre Design
(http://www.freecad.com/redirect.asp?LinkID=605&redirectURL=h ttp://www.print3dcorp.com/ )
|
|
Vendor Description: Users of Alibre Design can now receive instant quotes for their 3D models through a one-click command on the Alibre Design file menu.
Print3D plug-in integrates a pricing engine into Alibre Design that instantly calculates guaranteed part quotes for every component of a CAD assembly. Designers can also order production and next-day delivery of the parts directly from the Alibre Design environment
Vendor by: Print3D
admin
| 1/15/2009 | 579
Views
|
|
| |
|
Function Plotter for SolidWorks
(http://www.3dcontentcentral.com/macros/23/files/macro.aspx?i d=6287# )
|
SolidWorks add-in to automate the plotting of 3D curve functions. Equations can be input using cartesion, cylindrical, or spherical coordinates. Can create either curves or 3D sketches. Also has the option of exporting 3D data points. Uses Excel for calculations.
Vendor by: Dassault Systems
Website: http://www.3dcontentcentral.com/
admin
| 1/15/2009 | 236
Views
|
|
| |
|
Surface Plotter for SolidWorks
(http://www.3dcontentcentral.com/macros/23/files/macro.aspx?i d=6290# )
|
SolidWorks add-in to automate the creation of surfaces from 3D surface functions. Equations can be input using cartesion, cylindrical, or spherical coordinates. Can create either surfaces and curve sets. Uses Excel for calculations.
Vendor by: Dassault Systems
Website: http://www.3dcontentcentral.com
admin
| 1/15/2009 | 222
Views
|
|
| |
|
One-click Save as PDF
(http://www.3dcontentcentral.com/macros/20/files/secure/downl oad-macro.aspx?id=5630# )
|
|
Vendor description: One-click Save as PDF is a SolidWorks utility to create a toolbar button for saving active drawing file as PDF file.
Version required - SolidWorks 2007
Vendor by: 3D ContentCentral
Website: http://www.3dcontentcentral.com/default.aspx
admin
| 1/29/2009 | 296
Views
|
|
| |
|
CompPattern
(http://www.3dcontentcentral.com/macros/models/secure/downloa d-macro.aspx?id=8831 )
|
|
Vendor description: CompPattern is a SolidWorks utility to create a feature driven component pattern using the last selection for the pattern features and previous selections as the seed components.
Required version - SolidWorks 2007
Vendor by: Dassault Systems - 3D ContentCentral
Website: http://www.3dcontentcentral.com/default.aspx
admin
| 1/29/2009 | 232
Views
|
|
| |
|
Print3D for SolidWorks
(http://www.print3dcorp.com/)
|
|
Vendor Description: Users of SolidWorks can now receive instant quotes for their 3D models through a one-click command on the SolidWorks file menu.
Print3D plug-in integrates a pricing engine into SolidWorks that instantly calculates guaranteed part quotes for every component of a CAD assembly. Designers can also order production and next-day delivery of the parts directly from the SolidWorks environment.
Vendor by: Print3D
Website: http://www.print3dcorp.com/
admin
| 2/5/2009 | 369
Views
|
|
| |
|
Label View
(http://www.3dcontentcentral.com/macros/models/macro.aspx?id= 7207# )
|
|
Vendor Description: Label View is a SolidWorks add-in designed to make labels for drawing views. Label View can replace the default (mono-font) SolidWorks view labels with (multi-font) SolidWorks notes labels.
Version required: SolidWorks 2007
Vendor by: Dassault Systems - 3D ContentCentral
Website: http://www.3dcontentcentral.com/default.aspx
admin
| 2/5/2009 | 259
Views
|
|
| |
|
Print3D for Rhino
(http://www.print3dcorp.com/)
|
|
Vendor Description: Users of Rhino can now receive instant quotes for their 3D models through a one-click command on the Rhino file menu.
Print3D plug-in integrates a pricing engine into Rhino that instantly calculates guaranteed part quotes for every component of a CAD assembly. Designers can also order production and next-day delivery of the parts directly from the Rhino environment.
Vendor by: Print3D
Website: http://www.print3dcorp.com/
admin
| 2/10/2009 | 372
Views
|
|
| |
|
Geometric Tolerancing Symbols Library Foreshorten Arrows Add-on
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=116 )
|
Geometric Tolerancing Symbols Library Foreshorten Arrows Add-on is a small library of foreshortening dimension arrow symbols to add to SolidWorks GTol.sym file (available in every annotation note properties window via the add symbols button). Symbols include foreshortened arrows left, up, down, and right. This file and GTol.sym are editable with notepad.
Vendor by: Jeff Hamilton
Website: http://sw.fcsuper.com/index.php
admin
| 2/12/2009 | 255
Views
|
|
| |
|
Simplified Tapped Holes
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=93 )
|
Simplified Tapped Holes is a hole wizard callouts template for SolidWorks 2007. It minimizes the hole wizard callout templates in calloutformat.txt for tapped holes (threaded holes) to a single line that shows thread size, thread Series, tread class and depth.
Vendor by: Matthew Lorono
Website: http://sw.fcsuper.com/index.php
admin
| 2/12/2009 | 257
Views
|
|
| |
|
Print3D for SpaceClaim
(http://www.print3dcorp.com/)
|
|
Vendor Description: Users of SpaceClaim can now receive instant quotes for their 3D models through a one-click command on the SpaceClaim file menu.
Print3D plug-in integrates a pricing engine into SpaceClaim that instantly calculates guaranteed part quotes for every component of a CAD assembly. Designers can also order production and next-day delivery of the parts directly from the SpaceClaim environment.
Vendor by: Print3D
Website: http://www.print3dcorp.com/
admin
| 2/17/2009 | 362
Views
|
|
| |
|
GetInfoSel
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=12 )
|
Vendor description: GetInfoSel is a SolidWorks add-in to get detailed info on selected surface and associated edges.
Vendor by: picia
Website: http://sw.fcsuper.com/index.php
admin
| 2/19/2009 | 195
Views
|
|
| |
|
Assembly Rebuild and Save Times
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=117 )
|
Vendor description: Assembly Rebuild and Save Times is a SolidWorks add-in to calculate the time taken to rebuild and save assembly and its components. Output of statistics is given on an excel spreadsheet.
Website: http://sw.fcsuper.com/index.php
admin
| 2/19/2009 | 194
Views
|
|
| |
|
WatchIt Widget
(http://labs.solidworks.com/Products/Product.aspx?name=watchi twidget )
|
WatchIt Widget is a utility to monitor changes to files. It is great for teams working with data stored in a shared folder. Simply drag that folder onto this widget and you will be alerted when any files in that folder are modified.
Vendor by: SolidWorks Labs
Website: http://labs.solidworks.com/
admin
| 2/26/2009 | 283
Views
|
|
| |
|
SE Drawing Extractor Personal
(http://www.solidedgetools.com/download.asp)
|
SE Drawing Extractor Personal is a Solid Edge add-in to extract assembly and part data (ASM, PAR and DFT files) and save them as AutoCAD or CAM files (DWG, DXF, SAT, IGS, JT, STP, XGL and PLMXML).
Vendor by: Xpress Software
Website: http://www.solidedgetools.com/
admin
| 2/26/2009 | 362
Views
|
|
| |
|
SE CNC Converter Personal
(http://www.solidedgetools.com/download.asp)
|
SE CNC Converter Personal is a Solid Edge add-in to automate conversion of Solid Edge files into CNC machines compatible formats (DXF, SAT, IGS, STP and XGL).
Vendor by: Xpress Software
Website: http://www.solidedgetools.com/
admin
| 2/26/2009 | 352
Views
|
|
| |
|
Automatic Conversion
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=119 )
|
Vendor description: Automatic Conversion is a SolidWorks add-in to convert coordinate tolerances to positional tolerance zones and vice versa. It is useful for projects to apply GD&T to designs and drawings. It can also be used to determine coordinate tolerance equivalents to employed position tolerances.
Vendor by: Matthew Lorono
Website: http://sw.fcsuper.com/index.php
admin
| 3/12/2009 | 212
Views
|
|
| |
|
Redlight
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=115 )
|
Vendor description: Redlight is a SolidWorks add-in that allows users to avoid automatic rebuilds in SolidWorks. Rebuilds are not always necessary while working on a solid model or assembly. This kind of control speeds up efficiency on certain tasks by giving the user the ability to disable undesired rebuilds.
Vendor by: Philippe Guglielmetti
Website: http://sw.fcsuper.com/index.php
admin
| 3/12/2009 | 210
Views
|
|
| |
|
ArrayCrvPLUS v2.0
(http://jarek-rhinoscripts.blogspot.com/2008/12/arraycrvplus- v20.html )
|
|
Vendor description: ArrayCrvPLUS v2.0 enables new ways to distribute items along path curves or path curves on surfaces ( polysurfaces, meshes ). It will array any number of items along any number of curve paths. Parameters can be adjusted with preview functionality.
In addition, while arraying curves or points, ArrayCrvPLUS can automatically create loft/sweep1 surfaces or interpolated curves based on created array of profile items.
Requires Rhino 4.0 SR4 or higher.
Vendor by: RhinoScripted Tools
Website: http://jarek-rhinoscripts.blogspot.com/
admin
| 3/12/2009 | 616
Views
|
|
| |
|
MultiViewCapture
(http://jarek-rhinoscripts.blogspot.com/search/label/MultiVie wCapture )
|
|
Vendor description: MultiViewCapture is a Rhino plug-in to capture multiple views, layerstates and displaymodes with customizable settings.
Requires Rhino 4.0 SR4 or higher.
Vendor by: RhinoScripted Tools
Website: http://jarek-rhinoscripts.blogspot.com/
admin
| 3/19/2009 | 575
Views
|
|
| |
|
PanelingTools
(http://en.wiki.mcneel.com/default.aspx/McNeel/PanelingTools. html )
|
|
Vendor description: PanelingTools is a Rhino plug-in for Paneling NURBS surfaces and polysurfaces. The latest build of PanelingTools Plug-in toolbars and syntaxml for scripting. Runs with Rhino 4.0 SR5
Vendor by: McNeel
Website: http://www.en.na.mcneel.com/default.htm
admin
| 3/25/2009 | 399
Views
|
|
| |
|
ConfigSearcher
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=100 )
|
ConfigSearcher is a simple application that is executed from a desktop icon that will search all configurations of the open and active SolidWork document for specific values for specific custom properties.
Vendor by: Luke Malpass
Website: http://sw.fcsuper.com/index.php
admin
| 3/26/2009 | 220
Views
|
|
| |
|
ImportBOM
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=123 )
|
Vendor description: ImportBOM is a SolidWorks add-in macro, which imports almost any excel table directly into a SolidWorks drawing as a SolidWorks native table.
Vendor by: Lorono's SolidWorks Resources - Luke Malpass
Website: http://sw.fcsuper.com/index.php
admin
| 4/9/2009 | 187
Views
|
|
| |
|
DeleteCustomInfo
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=102 )
|
|
Vendor description: DeleteCustomInfo is a handy widget for the complete deletion of custom properties from an open SolidWorks file. Affected properties are user selectable. "Nuke" button deletes the properties from all configurations in one action.
Vendor by: Lorono's SolidWorks Resources - Roland Schwarz
Website: http://sw.fcsuper.com/index.php
admin
| 4/9/2009 | 169
Views
|
|
| |
|
CommonNotes 2.55
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=35 )
|
Vendor description: CommonNotes 2.55 is a SolidWorks add-in to add common or standard drawing notes automatically. It has built in note editor to add custom notes on the fly.
Vendor by: Lorono's SolidWorks Resources
Website: http://sw.fcsuper.com/index.php
admin
| 4/16/2009 | 227
Views
|
|
| |
|
T-FLEX CAD Student Edition
(http://www.tflex.com/student/)
|
|
Vendor description: T-FLEX CAD Student Edition is the no-cost variant of Top Systems T-FLEX professional parametric 2D drafting and 3D modeling software based on parasolid kernel. This product includes all the tools that students and educators need to create highest-quality 2D drawings and 3D CAD models. You can create drawings, surfaces and solids, build complex assemblies, analyze the behavior of models with the build-in express FEA and dynamic analysis modules, render, and perform many other 3D design functions. The program includes import from STEP, IGES, SolidWorks, Solid Edge, Inventor, AutoCAD and Rhino part and assembly models. T-FLEX CAD Student Edition is not intended for commercial use. Files created within the student edition cannot be opened with commercially licensed T-FLEX CAD.
Vendor by: Top Systems
Website: http://www.tflex.com/index.htm
admin
| 5/7/2009 | 952
Views
|
|
| |
|
Quick View Save and Restore
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=128 )
|
|
Vendor description: Quick View Save and Restore is a pair of SolidWorks macros for use together. First by executing QuickViewSave to create a saved view called 'InstantView'. Then by executing QuickViewRestore to go back to the InstantView view any time there after. To assign a new view to InstantView, simply execute QuickViewSave again.
Quick View Save and Restore can be used to quickly save and restore a named view without a lot of steps in SolidWorks. This can be done by assigning them to toolbar buttons or keyboard shortcuts.
Vendor by: Matthew Lorono - Lorono's SolidWorks resources
Website: http://sw.fcsuper.com/index.php
admin
| 5/7/2009 | 200
Views
|
|
| |
|
ProductView Express
(http://www.ptc.com/appserver/mkt/products/home.jsp?k=4029)
|
|
Vendor description: ProductView Express is a tool for those people in your product development chain that might not use Pro/E but still need to see your work. With ProductView Express, others can view your files without having Pro/E installed. Your extended team can view parts, assemblies, and drawing just by installing this free browser plug-in. It is available for UNIX, Windows and Linux users.
Benefits:
- Quickly view Pro/E object types within your web browser
- Use dynamic spin, pan, zoom, and fly-through capabilities
- Display objects in wireframe, hidden line, no hidden and shading
- Control graphical performance using frames per second
- Work with even the latest assemblies with shrinkwrap technology
- Improved productivity by allowing users to easily share visual information across the enterprise
- No training required - simple user interface is consistent with new look and feel of Pro/E Wildfire
Vendor by: PTC
Website: http://www.ptc.com/
admin
| 5/13/2009 | 243
Views
|
|
| |
|
Penguin 2.0 Evaluation for Rhino
(http://www.penguin3d.com/download.htm)
|
|
Vendor description: Penguin 2.0 Evaluation is a conceptual, sketch and cartoon, non-photometric scan line rendering and technical illustration tool for Rhino. With Penguin you can create stylized images of your models with an artistic look for enhanced graphic and visual appeal. Penguin 2.0 Evaluation works with Rhino 4.0 and has the same hardware requirements as Rhino. Features: - Easy to use, works seamlessly inside Rhino
- Quickly produces an image in the desired resolution
- Uses OpenGL rendering for fast results
- Rhino or AutoCAD based, render changes to the model immediately, you never need to export or start over
- Renders all models (except Flamingo or AccuRender plants)
- Batch rendering through scripts
- Antialiasing with user control
- Complements your project renderings with synthetic images
- Ability to create your own rendering styles
- Support for TGA, BMP, PCX, PNG and JPEG file formats
- Supports background bitmaps
- Improved user interface and closer integration with Rhino
- Supports dimensions, annotations and curves
- New shader engine
- Supports shadows
- Specific settings for every object
- Export a render into a vector format
- Real time display inside Rhino
- Penguin global and object settings saved in the 3DM file
Note: Penguin 2.0 Evaluation is a fully functional version that draws thin black lines across the final rendered image.
Vendor by: Robert McNeel
Website: http://www.penguin3d.com/default.htm
admin
| 5/20/2009 | 302
Views
|
|
| |
|
SaveAsPDF with Folder Selection
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=130 )
|
HTML clipboardVendor description: SaveAsPDF with Folder Selection
is a SolidWorks add-in to automate the process of saving a document as a PDF
(using updated SolidWorks API). The save location can chosen by user without
editing any code, if the default folder doesn't exist. It can be the current
folder or same as the document being saved. The location can also be manually
chosen by the user with the 'Browse For Folder' window.
Vendor by: Matthew Lorono
Website: http://sw.fcsuper.com/index.php
admin
| 5/28/2009 | 211
Views
|
|
| |
|
ANVILgcl 2.0
(http://www.mcsaz.com/software/utilities.htm)
|
|
Vendor description: ANVILgcl 2.0 is a windows program for compiling & linking ANVIL Express GRAPL-IV programs. Designed with an easy-to-use windows interface, it makes compiling & linking programs and their subroutines quicker. The program is designed to run on Windows NT 4.0 (SP5 or greater), Windows 98, Windows 2000, or XP only.
Features:
Simple Windows interface for processing ANVIL parts
ANVILgcl now supports Windows NT 4.0/2000/XP
New browse option for choosing GRE executable directory
Any compile/link errors are reported for easy reference, making debugging programs easier
Edit source or link lists directly by specifying your favorite text editor
Compile individual or multiple source files at once
Redirect the finished GRAPL executable file to a separate directory
General fixes ad enhancements
Extensive HTML Help
Vendor by: Manufacturing and Consulting Services
Website: http://www.mcsaz.com/
admin
| 6/4/2009 | 312
Views
|
|
| |
|
iCopy for Inventor
(http://labs.autodesk.com/utilities/inventor_icopy/)
|
|
Vendor description: iCopy for Inventor is an Autodesk Inventor add-in that enables you to make multiple copies of an assembly that automatically resize to fit your design. By capturing a few key constraints, such as connection points and paths, iCopy creates and inserts multiple instances of the assembly, automatically adjusting the size and shape of each occurrence based on your functional requirements.
Benefits:
- Save time by easily customizing commonly-used assemblies
- Avoid errors when working with complex designs involving multiple paths
- Innovate by exploring multiple design iterations quickly
Vendor by: Autodesk Labs
Website: http://labs.autodesk.com/
admin
| 6/4/2009 | 248
Views
|
|
| |
|
Rotate All Bodies in Part
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=132 )
|
Vendor description: SolidWorks add-in to rotate all bodies in active part in X axis by a given amount of angle value in either positive or negative direction.
Vendor by: Lorono's SolidWorks Resources - by Deepak Gupta
Website: http://sw.fcsuper.com/index.php
admin
| 6/11/2009 | 170
Views
|
|
| |
|
XVL Studio Pro
(http://www.lattice3d.com/3D_product_download/spro_reg_form.h tml )
|
Vendor description: XVL Studio Pro - free evaluation version is a tool for turning 3D data into 3D manufacturing data. This application is the main XVL authoring tool for performing mathematically correct interference and clearance checks on 3D assembly data, manipulating parts lists, creating process designs, delivering 3D work and assembly instructions and illustrations direct from 3D design data.
Lattice Technology is making its automated design review tools easily available for designers and engineers to quickly try out the software for design review activities. Sample data and tutorials also make it easy to discover how automated design review can change the way design-to-manufacture processes progress.
Benefits:
Highly Accurate Designs
Improve productivity
Turn 3D design data into 3D manufacturing data
Integrate directly with existing 3D CAD, PLM, ERP, MES and other IT infrastructures to enable rapid use of only current 3D manufacturing data
Solve multi-CAD problems
Vendor by: Lattice Technology
Website: http://www.lattice3d.com/index.html
admin
| 6/11/2009 | 265
Views
|
|
| |
|
MassCenterMarking
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=133 )
|
|
Vendor description: MassCenterMarking is a SolidWorks macro to identify the center of mass (sometimes called center of gravity) for a part or assembly.
Run this macro when design is complete, or after editing is done. It will create a 3D sketch with a point at the location on the model that is equal to its center of mass.
Note: Macro's code is clearly labeled for learning and editing purposes.
Vendor by: Lorono's SolidWorks Resources
Website: http://sw.fcsuper.com/index.php
admin
| 6/17/2009 | 169
Views
|
|
| |
|
Set Layer and Draw Line
(http://sw.fcsuper.com/index.php?name=UpDownload&req=viewdown loaddetails&lid=131 )
|
|
Vendor description: Set Layer and Draw Line is a SolidWorks add-in to set specific layer as the current layer and adds a sketched line on that layer.
Note: Make sure that active document is a drawing document and a specified layer exists.
Vendor by: Lorono's SolidWorks Resources - Deepak Gupta
Website: http://sw.fcsuper.com/index.php
admin
| 6/23/2009 | 185
Views
|
|
| |
|
CADMAX Solid Master
(http://www.cadmax.com/index.cfm/cID/1187?CFID=4658294&CFTOKE N=95006443 )
|
Vendor description: CADMAX Solid Master is a Windows based parametric, feature-based, boolean solid modeling, free-form surface modeling, and 2D drafting fully integrated application for mechanical engineers.
Vendor by: CADMAX
Website: http://www.cadmax.com/
admin
| 6/24/2009 | 284
Views
|
|
| |
|
Driving Dimensions for Rhinoceros
(http://drivingdimensions.com/download/)
|
|
Vendor description: Driving Dimensions for Rhinoceros is a powerful tool for bottom-up assembly design and kinematics simulation with assembly constraints compatible with the capabilities of mainstream MCAD software packages.
With Driving Dimensions 0.1 for Rhinoceros you can easily position your rigid 3D parts with respect to each other by specifying assembly constraints (fixation, concentricity, coincidence, parallelism, perpendicularity, or tangency) and driving dimensions (distance and angle) between their faces and edges. Driving Dimensions plugin automatically satisfies all constraints and dimensions making a consistent assembly from existing parts. An assembled mechanism can then be animated by varying a parameter of one of its driving dimensions. A constraint manager tool allows easy navigation over all assembly constraints and driving dimensions imposed on geometric elements of a designed model.
The Driving Dimensions plugin is powered by the LGS 3D variational geometric solver and combines the flexibility of constraint-based geometric modeling with ease of use.
Driving Dimensions 0.1 for Rhinoceros is a proposed to everyone for free beta testing.
Vendor by: LEDAS
Website: http://drivingdimensions.com/
admin
| 7/1/2009 | 394
Views
|
|
| |
|
Inventor Fusion Technology Preview
(http://labs.autodesk.com/technologies/fusion/)
|
|
Vendor description: Inventor Fusion Technology Preview is innovative, new digital prototyping technology that's changing the way people work on 3D mechanical design software. Inventor Fusion technology showcases intuitive direct manipulation capabilities for unrivaled ease of use, provides direct modeling for rapid design changes without limitations, and unites direct and parametric workflows within a single digital model.
Unites direct and parametric workflows:
- With the introduction of Inventor Fusion technology, both direct, history-free and parametric, history-based workflows are united
- Unique fusion of capabilities enables you to adopt the modeling approach that is most appropriate for the task at hand
Unrivaled ease of use:
- Fast, easy selection tools for direct manipulation of your design models
- Heads up sketching and modeling predict your actions based on design context
- Intuitive, graphics-based user interface keeps your focus on the screen center
- Advanced graphics technology for crystal clear visualization and stunning displays
Rapid design changes without limitations:
- Direct modeling when it's the right tool for the job
- Quickly make unique design changes and explore 'what if' scenarios
- Easily express your design ideas irrespective of feature order, dependencies, or original CAD system
The download for test drive of the Technology Preview is limited to the following geographical locations: Australia, Austria, Belgium, Brazil, Canada, China, France, Germany, Ireland, Italy, Japan, Luxembourg, New Zealand, Singapore, Switzerland, United Kingdom, and United States.
Vendor by: Autodesk
Website: http://labs.autodesk.com/
admin
| 7/1/2009 | 254
Views
|
|
| |
|
HeeksCAD
(http://code.google.com/p/heekscad/downloads/list)
|
Vendor description: HeeksCAD is an application to import solid models from STEP and IGES files. Draw construction geometry, lines and arcs. Create new primitive solids, make solids by extruding a sketch or by making a lofted solid between sketches. Modify solids using blending, or boolean operations. Save IGES, STEP and STL. Printer plot the 2D geometry or to HPGL. Import and export DXF files, lines, arcs, ellipses, splines and polylines are supported. Use the geometric constraints solver to create accurate drawings from rough sketches.
Vendor by: Dan Heeks
Website: http://code.google.com/p/heekscad/
admin
| 7/16/2009 | 824
Views
|
|
| |
| In
category CAD Utilities |
| |
|
Bearing/Distance inverse
(http://www.kwic.com/~crowell/files/inv.zip)
|
|
Small Autolisp utility for inversing from point to point to display the bearing and distance.
admin
| 12/31/1969 | 420
Views
|
|
| |
| In
category CAD Services |
| |
|
CADTutor
(http://www.cadtutor.net/)
|
|
CADTutor delivers the best free tutorials and articles for AutoCAD and associated applications along with a friendly AutoCAD forum. If you need to learn AutoCAD, you're in the right place.
The Tutorials section provides over 50 original tutorials for AutoCAD and other design applications such as 3DS MAX, Photoshop and Bryce. Michael’s Corner is a monthly article that brings you the best up-to-date AutoCAD tips and tricks. The CADTutor Forum is a lively bulletin board where AutoCAD users can ask questions and get answers. The Download area provides free AutoCAD blocks, free AutoLISP routines and free digital images.
admin
| 12/19/2007 | 543
Views
|
|
| |
| In
category CAD Converters |
| |
|
Cadmatic eXchanger
(http://www.cadmatic.com/xml/downloads/downloads.html)
|
|
Converts AutoCAD solid models from and into cadmatic reference models. This allows Auto-CAD users to use their AutoCAD 3D models in their cadmatic plant design projects. There are a large number of file transfer plugins to AutoCAD. This enables compatibility with different formats enabling cadmatic users to transfer models from and to other applications such as SolidWorks, Autodesk Inventor and CATIA.
Cadmatic eXchanger is compatible with AutoCAD® 2004,2005,2006 and 2007 software versions.
admin
| 5/5/2008 | 569
Views
|
|
| |
|
DevConv
(http://www.devcad.com/eng/default.htm)
|
|
DevConv is DXF, DXB, DWG converter.
- Stand-alone tool, it does not require AutoCAD
- Supports all new versions of DWG/DXF/DXB files (R9 to R2006/2007 formats)
- DevConv does not require any installation: simply download it and run it
- DevConv supports command line. The command line allows you to convert files in silent without interface
admin
| 5/22/2008 | 610
Views
|
|
| |
|
IGES2STEP
(http://www.iges2step.narod.ru)
|
|
IGES2STEP is a freeware CAD file viewer for Windows XP/2000/NT. It allows viewing IGES and STEP files and translating between them. The versions of the formats are:
- IGES: up to 5.3
- STEP AP203: Mechanical Design (General 3D CAD)
- STEP AP214: Automotive Design
- STEP AP209: Finite-Element Analysis (initial support)
admin
| 7/3/2008 | 875
Views
|
|
| |
|
Live DXF2BMP
(http://engknowledge.com/live_dxf2bmp.aspx)
|
Live DXF2BMP is free software that converts CAD generated drawing to raster image, drawings can be generated by any CAD program that support DXF format such as AutoCAD.
Entities supported by DXF2BMP program are: Dots, Lines, Polylines, Circles, Curves, Ellipse.
This utility is that its standagoodlone converter, so no AutoCAD or other CAD program installation is required. Output image file properties can be controlled by the user such as colors, margin and size.
Vendor by: Engineering Knowledge
Website: http://engknowledge.com/default.aspx
admin
| 6/26/2008 | 382
Views
|
|
| |
|
Raster to Vector Converter SDK
(http://www.dwgtool.com/raster-to-vector-sdk.htm)
|
Raster to Vector converter SDK, which can high-speed convert raster bitmap into vector image. It supports such all kinds of image format as BMP, JPG, TGA, TIF, PCX etc.
Vendor by: DWG TOOL Software
Website: http://www.dwgtool.com/index.htm
admin
| 7/17/2008 | 318
Views
|
|
| |
|
RP Export for SolidWorks
(http://www.openrp.com/products/rp_export_sw/index.htm)
|
Vendor description: RP Export for SolidWorks is a free OpenRP RP file export add-in for SolidWorks. This add-in gives SolidWorks the ability to export 3D solid and surface data from a SolidWorks part and assembly document to meshes in a RP file.
RP Export for SolidWorks tessellates the solid bodies in a SolidWorks part or assembly document into individual triangular meshes. These meshes are then exported to RP file as mesh objects.
It is very easy to use. Once installed, it automatically loads itself into SolidWorks and adds a new submenu called 'RPExport' to the SolidWorks menu.
Vendor by: SYCODE
Website: http://www.openrp.com/index.htm
admin
| 9/30/2008 | 324
Views
|
|
| |
|
RP Import for Rhino
(http://www.openrp.com/products/rp_import_rh/index.htm)
|
|
RP Import for Rhino is a free RP file import plug-in for Rhinoceros 3.0 and 4.0. This plug-in gives Rhino the ability to import meshes from RP files. Reads OpenRP RP files and creates polygon mesh objects in the current Rhino document.
RP Import for Rhino is designed to be extremely user friendly and easy to understand. ORPe installed, it automatically loads itself into the Rhino environment. If automatic loading fails there are manual loading instructions in the ReadMe file. ORPe loaded it adds new commands to Rhino's existing commands and a new submenu called 'RPImport' to the Rhino menu containing these newly added commands. Designed to be extremely user friendly and easy to understand. It adds new commands to Rhino and also a new submenu called 'RPImport' which houses these commands.
Vendor by: SYCODE
Website: http://www.openrp.com/index.htm
admin
| 9/25/2008 | 312
Views
|
|
| |
|
Algolab Raster to Vector Conversion CAD/GIS SDK
(http://www.algolab.com/files/r2vsdk.zip)
|
Software development kit for CAD/CAM/ GIS and graphic software developers. Converts from raster to vector and refines architect, mechanical, tech drawing, maps, math graphs, graphics for books and journals and more. ActiveX and Com Component are also available. Refines vector graphics, creates fine lines and shapes. Scanned drawings are recognized and represented in a vector format to be imported to your CAD or drawing program. Output in vector formats DXF (AutoCAD), AI (Adobe Illustrator), EMF ( Enhanced metafile, WMF and ASCII XY ( MS Excel, Mathematica, Lotus 123 etc.).
Vendor by: Algolab
admin
| 12/31/1969 | 552
Views
|
|
| |
|
CATIA V5 Import Translator for Inventor
(http://labs.autodesk.com/utilities/catia_translator/)
|
|
This technology preview gives you more flexibility when creating designs with vendor or customer data by allowing you to directly import CATIA V5 files into Autodesk Inventor. This translator reads both CATPart and CATProduct files bringing solids, surfaces, wires, and points into Autodesk Inventor to be directly utilized while modeling. Being able to import directly from CATIA V5 files eliminates the need to convert the CATIA data to make it usable in your projects.
Need licensed copy of Autodesk Inventor 2009 SP1 or the Autodesk Inventor LT Technology Preview 2009 SP1 to run this add-in. CATIA V5 versions R6 through R18 are supported with this technology preview.
Vendor by: Autodesk Labs
Website: http://labs.autodesk.com/
admin
| 11/20/2008 | 398
Views
|
|
| |
|
Collada Export
(http://labs.solidworks.com/Products/Product.aspx?name=collad aexport )
|
|
Collada Export is used for exporting SolidWorks assembly in the Collada format, design is then defined by an open standard for 3D applications. This enables leverage of other 3D authoring applications which may not import native SolidWorks files, including applications on different operating systems. Model geometry is preserved in the export, with colors, textures and motion.
One of the key uses for a SolidWorks model exported to Collada is in a Microsoft Robotics Studio environment. This tool allows robotic simulation developers and robotic hardware makers to use code to control actual model geometry before any component is manufactured. Conversely, SolidWorks designers are able to export their motion studies into a format which in turn software developers can build upon to create simulations.
Prerequisites:
- SolidWorks 2009 SP0 or later - The Add-In will not run on older versions
- MS Windows XP/Vista x32 - There is currently no x64 support
Vendor by: SolidWorks Labs
Website: http://labs.solidworks.com/
admin
| 1/8/2009 | 311
Views
|
|
| |
|
| |
|
RP Converter
(http://www.openrp.com/products/rp_converter/index.htm)
|
RP Converter 1.0 is a free command line program to convert between RP and STL file formats. RP Converter can be used to add support for the RP file format to already existing systems that process STL files. End users can plug RP Converter into their existing programs that create STL files. RP service bureaus can use RP Converter to automatically accept RP files from end users and create a STL files from them to be further processed.
Vendor by: SYCODE
Website: http://www.openrp.com/index.htm
admin
| 5/19/2009 | 273
Views
|
|
| |
| In
category CAD File Management |
| |
|
ReproRog
(http://www.reprorog.com)
|
|
ReproRog is a plot submission tool for producing collated sets of drawings on Oce and other plotters. PDF files are translated where the target plotter does not support the format.
admin
| 12/31/1969 | 289
Views
|
|
| |
|
PDXpert
(http://www.buyplm.com/buyplm-DownloadLink-Sender.htm.aspx)
|
|
Vendor description: PDXpert product lifecycle management software to ensure that your organization's design information is accurate, reliable, controlled and available throughout the entire product lifecycle by efficiently managing product data and processes. PDXpert PLM software offers the most useful capabilities of high-end PLM software solutions, but without their complexity and expense.
PDXpert PLM software is a simple, flexible PLM solution that merges the principal features and capabilities from earlier product data management systems (PDMS), CAD data file managers, configuration management tools, and engineering drawing management systems (EDMS).
PDXpert PLM software is specifically tailored for growing companies to address these functions:
- Parts list management and rules-based automatic document and part numbering system
- Bill of materials / product structure management
- Engineering drawing management an management, including engineering change request (ECR) forms and engineering change order (ECO) forms, as well as change workflow for formally approved document control for requirement, design, process, support and other engineering data
- Electronic file repository that permits attaching files to parts, documents and change forms
- Changing and releasing new and revised product data
- Supplier sources management and approved parts identification
- Materials content identification for regulatory compliance
- Custom part and document data definitions
- Multi-user secured access, including 'electronic signature'
- Data export to downstream ERP/SCM/CRM systems
Vendor by: PDXpert PLM
Website: http://www.buyplm.com/
admin
| 1/27/2009 | 368
Views
|
|
| |
|
GoPDM
(http://www.gopdm.com/)
|
Vendor description: GoPDM is a business-class data management solution having easy to use features and professional design.
Features:
- Supports multiple CAD softwares, multiple versions of the same CAD software
- GoPDM safely handles updates and modifications to files from software that saves each file with a numbered extension
- For software that saves each file with a numbered extension, GoPDM has a built in purge function for the local working area, called a 'desk'
- Export directly from your desk to a zip file
- Save your exact file display from a desk or project folder
Vendor by: Fawcett Design
Website: http://www.gopdm.com/
admin
| 7/9/2009 | 390
Views
|
|
| |
| In
category CAD Programs - Windows |
| |
|
ZWCAD 2008i Standard
(http://www.zwcad.org/cad-software-download.html)
|
|
Vendor description: ZWCAD 2008i Standard software, highly reliable and powerful CAD tool, meets the needs of 2D/3D design & drafting industry, including architecture, engineering, construction (AEC), mechanics, electronics and anyone who creates CAD drawings.
New features:
- Faster editing actions
- Reconstruction of the TEXT Function
- Gradient Hatch
- Image Function with TFW Coordinate File
- Expanded DRX
- Design Center
- Quick Calculator
- Merge Print (mprint)
- Dynamic Prompt
Basic features:
- DWG Support
- Friendly User Interface
- Resource Files
- Creating and Modifying 3D Models
- Programming with ZWCAD
- Export
- Audit and Recover
- View Ports
- Plotting
Advance features:
- Publish
- Auto Track
- Plot Style Support
- Multi-Language Support in Mtext
- DXF Partial Export
- Reference and Attribute Modifying
- Quick Select
- Quick Leader
Vendor by: ZWCAD
Website: http://www.zwcad.org/index.html
admin
| 8/7/2008 | 979
Views
|
|
| |
|
MEDUSA4 personal
(http://www.cad-schroer.com/index.php?screen=1&ziel=Products- MEDUSA-M4Personal&land=com )
|
|
MEDUSA4 personal is design automation suite, available for Windows and six different Linux distributions. The 2D/3D CAD software now includes the MEDUSA4 smart drafting tool for creating geometry without construction lines.
MEDUSA4 Personal offers almost all of the functionality available in advance MEDUSA 4 package including basic 3D (sheet-based modeling), simple sheet metal design, and parametric functionalities, as well as drafting power tools such as smart edit.
The personal edition is restricted to noncommercial use. Small technical differences from the commercial version include a different sheet format, watermarked print output, and the ability to import from, but not export to, DXF/DWG format.
Vendor by: CAD Schroer
Website: http://www.cad-schroer.com/index.php?&land=com&scr=1.1
admin
| 1/8/2009 | 612
Views
|
|
| |
|
A9CAD
(http://www.a9tech.com/products/a9cad/)
|
A9CAD is a general purpose two-dimensional CAD program. It supports industry standard DWG & DXF drawing formats.2-dimensional CAD drawing viewing and editing. Support DWG and DXF format up to DWG/DXF 2000. Familiar Windows graphical user interface. Command window to input coordinates. View and edit entity attributes via properties window.
Vendor by: A9Tech
Website: http://www.a9tech.com/products/a9cad/
admin
| 9/1/2008 | 2214
Views
|
|
| |
|
4Design
(http://www.4dgraphics.net/4design.htm)
|
|
DOS-based CAD product, formerly called Personal Designer.
admin
| 12/31/1969 | 16749
Views
|
|
| |
|
ActiveSolid Standard
(http://activesolid.ncf.ca/download.html)
|
|
Vendor description: ActiveSolid Standard is a slightly scaled-down version of ActiveSolid Professional and is absolutely free for all users who are interested in 3D modeling, CAD, view markup and 3D digital communications.
Features
- Is compact in size and fast to load
- Is fully embeddable inside any COM container
- Features highly compressed 3D file format
- Provides free Import/Export Plug-in framework
- 2D object construction
- 3D object construction
- Advanced view manipulation
- Object editing
| |
admin
| 4/17/2008 | 19310
Views
|
|
| |
|
Blender
(http://www.blender.org/download/get-blender/)
|
Blender is the first and only fully integrated 3D graphics creation suite allowing modeling, animation, rendering, post-production, realtime interactive 3D and game creation and playback with cross-platform compatibility - all in one tidy, easily and free downloadable package!
admin
| 12/31/1969 | 9132
Views
|
|
| |
|
BlueCAD 1.0
(http://www.cadwaresoft.com/eng/html/bc10install.html)
|
|
Vendor description: BlueCAD 1.0 was born as the 2D CAD solution which gives
you easy drafting tools fully exploiting the Windows.
Main features:
- Good choice for every work environment, scoring high both on
architectural and mechanical drafting
- Fast and easy to use: good performance combined with an intuitive user
interface
- Flexible and integral: its C/C++ (Windows) or REXX (OS/2) interface
makes it a programmable and open system
- Provides you with a base and easy to use set of dimensioning functions,
UNI-ISO standard compliant
- Allows you to produce complex drawings on your PC: it can manage an high
number of graphical entities
- BlueCAD frees you from any hardware-dependant working environment: it
supports all the devices via the operating system
- 32-bit CAD system: it is the implementation of an advanced PC-software
technology yet
- Read and write DXF files
BlueCAD allows to create, modify, transform and manage a complete set of
drawing entities. Associative dimensioning, layers and blocks management, snap
to entities main points, grid, integrated Scientific Calculator, these are some
of the main tools of BlueCAD.
admin
| 5/3/2008 | 14376
Views
|
|
| |
|
BRL-CAD
(http://sourceforge.net/projects/brlcad/)
|
|
The BRL-CAD package is a powerful Constructive Solid Geometry (CSG) solid modeling system. BRL-CAD includes an interactive geometry editor, ray tracing support for rendering and geometric analysis, network distributed framebuffer support, image-processing and signal-processing tools.
admin
| 12/31/1969 | 4058
Views
|
|
| |
|
CAD X11 Free
(http://www.graytechsoftware.com/products/cadx11/cadx11free.a sp )
|
|
Vendor description: CAD X11 FREE is a great tool for 2D drafting and basic wireframe and surface modeling. All drafting features of CAD X11 Professional are supported making this free version a production class CAD tool for any company. This software can be completely standalone supporting several drafting standards, files up to 500 kb in size and outputting the results onto Windows based printers or into PDF files. Can be intermixed with other CAD software via the DXF CAD communication format.
CAD X11 Free include 3-D wireframe modeling, surfacing, custom DXF, 2-D drafting with ANSI/ ISO dimensioning, geometric tolerance, TrueType Font support, undo/redo, dynamic rotations, multiple views, data verification, geometric analysis, crosshatching, layering, Windows printer support and PDF output.
Features:
- Geometric Elements
- Geometry Manipulation and Grouping
- Scale and View Manipulation
- Drafting Functions (ANSI, ISO and Others)
- Geometric Analysis
- Data Base Management
- System and Font Control
- Advanced Features
admin
| 4/30/2008 | 8643
Views
|
|
| |
|
CadStd Lite
(http://www.cadstd.com/lite.html)
|
|
Vendor description: CadStd Lite is a general purpose, easy to learn CAD/drafting program for creating professional quality mechanical designs, house plans, blueprints, schematics, and charts. Export your drawings in DXF or use 'copy clipboard' to paste images into Office and other applications. Import simple DXF files.
Features:
Creates arcs, arrows, B-splines, circles, linear dimensions, lines, polylines, and text
Undo/Redo 4 levels
Export DXF, HPGL/1
Snaps (Intersection, Tangent, Center, End, Mid point, Perpendicular, etc)
Few features of CADstd Pro not available with free version.
admin
| 9/4/2008 | 3745
Views
|
|
| |
|
CADVANCE 6.5 for Windows
(http://www.cadvance.com/65form.htm)
|
|
2D CAD system without any features crippled. The "Save" function is active and is Windows based. This used to be a commercial system back in the early '90 through '95.This is a re-release of CADVANCE Version 6.5, a CAD software system designed for Windows 3.1, but yet also runs on Windows 95/98, Me, Windows NT, Windows2000, Windows XP Home, and Windows XP Pro.
admin
| 6/12/2008 | 3805
Views
|
|
| |
|
DESI-III
(http://users.telenet.be/desi-iii/FrmMain.html)
|
|
DESI-III is a professional 2D CAD system which uses European drawing standards. It has a very user friendly interface and a very steep learning curve. DESI-III's cursor position is always visible in a relative, polar or absolute mode.
admin
| 9/18/2008 | 1546
Views
|
|
| |
|
Design Expert Demo Version
(http://www.deskartes.com/)
|
|
Vendor description: Design Expert software has been specially developed as a design tool for industrial designers. It performs all the tasks required for designing and styling of industrial products. Design Expert Demo Version you can use all the Design Expert modeling and rendering functions, with some restriction for model size limit to 10MB, max 50 surfaces can be rendered, files cannot be moved between different machines.
Features
- Easy to learn
- Fast to use
- Modelling methodology simple and powerful
- Manufacturable geometry
- Real time 3D previewing
- Communicate in 3D
- Supports STL, IGES, VDA formats
Design Expert is supported on Windows 95/98 and Windows NT/2000/XP/Vista.
admin
| 8/7/2008 | 1155
Views
|
|
| |
|
Draft IT
(http://www.cadlogic.com/products/draftit/index.htm)
|
|
It is a powerful and easy-to-use 2D CAD system suitable for all users in the office or at home. Create print and save your own professional drawings.- Easy to use - visual aids compliment all commands.- Powerful drawing tools - lines arcs circles etc. with dynamic dimensions.- Dynamic editing functions with visual handles and snaps.- Supports Metric and Imperial Units.
admin
| 4/14/2008 | 4401
Views
|
|
| |
|
FREEdraft
(http://freeengineer.org/FREEdraft.html)
|
|
2D mechanical CAD GPL source code, no longer supported.
admin
| 12/31/1969 | 4931
Views
|
|
| |
|
JustCAD
(http://justcad.com/)
|
|
2D CAD program, by John Hoke
admin
| 12/31/1969 | 10361
Views
|
|
| |
|
progeCAD 2008 Smart
(http://www.progecad.com/compra/prodotti/eng_progecad2008smar t.html )
|
|
progeCAD 2008 Smart! is here. Read and write AutoCAD 2007/2008 DWG files for free*
AutoCAD functionality for free personal use. DWG DXF PDF read write. Similar icons, commands and interface. Raster image embedding, raster-to-vector software included. DWF publishing, IntelliCAD AutoLISP interpreter, ACIS 3D Solids modelling, temporary point snap (like oSnap), layers, blocks. Hatch, block and xref editing. 3D shading and rendering options. approx. 10000 Symbols library. Special upgrade price from recent AutoCAD, MicroStation, TurboCAD Pro, ArchiCAD, Actrix and others. Easy to learn. progeCAD professional includes their proprietary Express-Tools pack Free technical support in Australia, Europe, Worldwide by progeSOFT and CADDIT.net
- reads and writes AutoCAD® DWG files from 2.5 to 2008
- has industry standard AutoCAD Commands
- has AutoCAD® Menu, Script, Font Compatibility
- has AutoLISP® Compatibility!
- has Basic Rendering Options
- has Express Tools
- export to PDF and JPG
- 10,000 standard symbols and blocks available for free
- supports RedLine and Markup made by progeCAD Viewer DWG
System Requirements:
- Microsoft Windows® 2000 and Windows® XP
- Intel Pentium® III or more processor (recommended)
- 256 MB RAM (minimum), 512 MB (recommended for complex drawings)
- 400 MB of hard disk space
*Private use Only: progeCAD 2008 Smart! is for private, non-commercial use only. The use of progeCAD 2008 Smart! within any organization or for commercial and business purposes is strictly prohibited.
admin
| 12/10/2007 | 4724
Views
|
|
| |
|
ThanCad
(http://thancad.sourceforge.net/)
|
|
ThanCad is a 2D CAD software for engineers, with raster inclusion capability and emphasis on engineering. It is being written in Python and since it uses the Tkinter library, it is platform independent. But slower then commercial CAD software's.
Features:
- Free to use
- Written in python, so platform independent
- Supports layer, sublayer concept
- New features added
admin
| 9/25/2008 | 998
Views
|
|
| |
|
Tlinea
(http://www.iespana.es/tlinea/indexi.htm)
|
2D CAD shareware for beginners, with basic drawing tools.
admin
| 12/31/1969 | 1064
Views
|
|
| |
|
VectorEngineer Quick-tools
(http://www.vectorengineer.com/vectorengineer_site_005.htm)
|
|
Produce professional engineering, mechanical and technical drawings, designs, plans and diagrams with this free cad and drafting software. Option to save as dxf.
admin
| 5/29/2008 | 1615
Views
|
|
| |
|
Solid Edge 2D Drafting
(http://www.plm.automation.siemens.com/en_us/products/velocit y/solidedge/free2d/index.shtml )
|
Vendor description:Solid Edge 2D drafting gives immediate advantage with production-proven capabilities including drawing layout, Goal Seeking, diagramming, and dimensioning.It is fully compliant with ISO, ANSI, BSI, DIN, JIS and UNI.Solid Edge 2D Drafting eases the transition from 2D AutoCAD with import wizards, matched fonts and color schemes, XREF support, paper/model space support and much more. Get up to speed faster with a built-in Command Finder - never look for AutoCAD equilvalent command again.
Vendor by: Siemens
Website: http://w1.siemens.com/entry/cc/en/
admin
| 4/14/2008 | 1624
Views
|
|
| |
|
avoCADo
(http://avocado-cad.sourceforge.net/)
|
avoCADo is a 3D CAD program which aims to be a collaborative tool with an intuitive user interface for both engineers and artists. avoCADo is open source under the GPL.
Vendor by: SourceForge
Website: http://avocado-cad.sourceforge.net/
admin
| 1/22/2009 | 2532
Views
|
|
| |
|
QCAD
(http://www.qcad.org/qcad_downloads.html)
|
|
QCAD is 2D CAD application. With QCAD you can create technical drawings such as plans for buildings, interiors, mechanical parts or schemas and diagrams.
QCAD works on Windows, Mac OS X and many Linux and Unix Systems. The source code of the QCAD community edition is released under the GPL.
Vendor by: RibbonSoft
Website: http://www.qcad.org/index.html
admin
| 1/22/2009 | 1823
Views
|
|
| |
|
DoubleCAD XT
(http://activate.imsisoft.com/doublecad.aspx?productpage=Doub leCAD-XT )
|
|
Vendor description: DoubleCAD XT is an AutoCAD LT work-alike.
Features:
- Better drafting features
- Better detailing features
- Self-healing walls (ADT compatible)
- Self-aligning blocks
- Advanced handle-based editing with instant access to a variety of tools
- Snap prioritization
- Smart dimensions
- Fast zoom with no pauses
- Brush editor
- Better hatch patterns & gradient fills (using bitmaps, transparency, & full color)
- Draw in 16 million colors (vs. only 256 colors in AutoCAD LT)
- Special line, arc, and circle tools
- Multiline, bezier, and fixed ratio ellipses tools
- Meet-Two-Lines and Convert-to-Curve modify tools
- Superior workflow with Google SketchUp and SketchUp Pro (including new v7
- Open & save .DWG, .DXF, and .DWF formats from AutoCAD R14 (1997) to 2009
Easy to learn, use tool for AutoCAD LT users, DoubleCAD XT has familiar menu, menu items, tools, icons, command line, keystrokes and cursor. Effective drafting and detailing features. Unique and compelling tools set. more.
Website: http://www.doublecad.com/Home/tabid/1079/Default.aspx
admin
| 2/12/2009 | 3402
Views
|
|
| |
|
CAD X11
(http://graytechsoftware.com/products/cadx11/cadx11free.asp)
|
|
Vendor description: CAD X11 is a general CAD system ideally suited for mechanical drafting, 3D wireframe modeling and surfacing.
Features:
- 2D drafting functions with ANSI, ISO and JIS dimensioning
- Includes required geometric elements like point, line, arc, spline, triangle, hexagon, rectangle, etc
- Geometry manipulation and grouping features
- Scale and view manipulation features
- Geometry analysis
- Data base management tools
- System and font control features
- Windows printer and PDF output methods
Vendor by: GrayTech Software
Website: http://graytechsoftware.com/index.asp
admin
| 5/14/2009 | 1132
Views
|
|
| |
|
APM Graph LV
(http://www.apmwm.com/eng/free/?PHPSESSID=beb401f14b92be4d519 70adc2a62016f )
|
|
Vendor description: APM Graph LV is a light version of 2D graphical editor with parameterization tools.
Light version is free for students, education purpose and for state organization.
Vendor by: APM Ltd
Website: http://www.apmwm.com/eng/
admin
| 6/4/2009 | 1361
Views
|
|
| |
|
eMachineShop CAD Software
(http://www.emachineshop.com/machine-shop/Download/page100.ht ml )
|
|
Vendor description: eMachineShop CAD Software V 1.56 is an easy to use CAD package, with simple and interactive user interface. Software tools not only allow users to draw objects, but also able to place orders for custom parts right from your PC.
Features:
- Automatic error resolutions
- Printing actual size on multiple pages
- Automatic alternate material suggestions
- Supports open lines for shearing
- Supports DXF format
- Print option available
- Compability with Windows 98, ME, 2000, NT, XP and Vista
Vendor by: eMachineShop
Website: http://www.emachineshop.com/machine-shop/Home/page5.html
admin
| 6/10/2009 | 1571
Views
|
|
| |
| In
category CAD Parts and Libraries |
| |
|
CAD Blocks
(http://www.cadyou.com/blocks)
|
Vendor description: CAD Blocks are free to download utilities for AutoCAD, consisting of 3D blocks.
Includes:
- Office chairs
- Deciduous trees in elevetion
- Complex trees
- People collection
- Furniture
- Seat
- Office
- Police
Vendor by: CADyou
Website: http://www.cadyou.com/
admin
| 7/13/2009 | 953
Views
|
|
| |
| In
category Miscellaneous |
| |
|
ReproRog
(http://www.reprorog.com)
|
ReproRog is a plot submission tool for producing collated sets of drawings on Oce and other plotters. PDF files are translated where the target plotter does not support the format.
Vendor by: ReproRog
admin
| 12/31/1969 | 396
Views
|
|
| |
|
eDrawings Publisher
(http://www.solidworks.com/sw/products/free-cad-software-down loads.htm )
|
|
Publish and share product designs more effectively via email. eDrawing Publisher software to publish eDrawings files directly from SolidWorks, AutoCAD, Inventor, Pro/ENGINEER CATIA V5, Unigraphic/NX, Solid Edge Version 17 and CoCreate's OneSpace software.
Reduce bandwidth requirements more than 95% by publishing and emailing eDrawings files instead of CAD files. Each of the four free eDrawings Publisher products also includes the free eDrawings Viewer. eDrawings Publisher products are intended for CAD users who need to share products designs more effectively.
Share product designs more effectively with your entire product design team, including product managers, marketing managers, manufacturing specialists, customers, and suppliers.
Vendor by: Dassault Systemes SolidWorks Corp
Website: http://www.solidworks.com/default.htm
admin
| 9/4/2008 | 281
Views
|
|
| |
|
AcadTRK V1
(http://arcscripts.esri.com/details.asp?dbid=12779)
|
|
Mapping Tools For all AutoCAD Family Read the quick and dirty manual in the Manual folder first, and do whatever it says. AcadTRK is a series of advanced AutoLisp & Menus and mapping tools that has been used by me beside many companies. For instance, it reads XYZ files, and write xyz to files. The tools are mostly based on construction surveying, total station based land surveying, and some of the utilities to enhance AutoCAD in turn ArcCAD. There are about 20 programs for your pleasure.
There is an installation manual also. The tools use grad for angle, and North = 0, clockwise direction. So, who would like to use degree or others are to be careful.
The lisps has recently was translated into English in about 20 minutes from Turkish. So, there mihght be some spelling errors as well as something still remains in Turkis, and sorry for that.
admin
| 8/29/2008 | 389
Views
|
|
| |
|
Document3D Suite - Personal Edition
(http://www.quadrispace.com/downloads/index.htm)
|
|
Vendor description: - Document3D Suite is 3D communication and documentation toolset, let's you use your 3D models directly to create professional documents for manufacturing instructions, user guides, illustrated parts lists, service procedures, marketing brochures and other product documents that are necessary to get your products to market.
Free 3D communication product includes Pages3D for document creation and Publisher3D for image and animation creation.
Features:
- Share 3D PDF documents through email
- Share Word documents with embedded images of your 3D
- Share image attachments quickly and easily
- Publish complete documents with high-quality 3D imagery
- Create and publish interactive 3D documents, such as 3D PDF
- Create and manage illustrations, publish as raster or vector graphics
- Produce high-quality animations of product interactions
admin
| 9/25/2008 | 701
Views
|
|
| |
|
IDX Renditioner Express
(http://www.idx-design.com/IDX/IDXRenditioner/FreeVersionofID XRenditionerExpress/tabid/1011/Default.aspx )
|
|
Vendor description: IDX Renditioner Express is the first free fully integrated, one-click easy photorealistic renderer for PC version of SketchUp.It is great for personal use or posting images on the web and is available for unlimited commercial or personal use. The free version of IDX Renditoner Express includes all the same features as IDX Renditioner but differs in render size and possibly speed. Supports a maximum render size of 640 x 480 pixels.
admin
| 8/21/2008 | 327
Views
|
|
| |
|
Improve Curves
(http://www.rhino3d.com/resources/display.asp?language=&listi ng=187 )
|
|
Vendor description: Converts curves to arcs, draws a new curve from the control points of the input curve, refits curves to a defined point count, converts curve to polyline and interpolates the polyline to a degree 3 curve with a defined control point count, makes closed periodic curves nonperiodic.
admin
| 6/26/2008 | 172
Views
|
|
| |
|
openNURBS
(http://www.rhino3d.com/resources/display.asp?language=&listi ng=105 )
|
The openNURBS Initiative provides CAD, CAM, CAE, and computer graphics software developers the tools to accurately transfer 3-D geometry between applications. openNURBS is an open source toolkit for reading and writing models in the 3DM format.
The tools provided by openNURBS include:
- A file format specification and documentation
- C++ source code libraries to read and write the file format. Windows, Mac, and Linux are supported
- Quality assurance and revision control
- Various supporting libraries and utilities
- Technical support
admin
| 7/24/2008 | 180
Views
|
|
| |
|
DualCAD
(http://pcscad.com/index.html)
|
|
Vendor Description: DualCAD is a MicroStation editor. DualCAD supports editing of both V7 and V8 MicroStation files. Handles reference files, view hybrid vector/raster files in TIF, JPEG, CIT, COT, TG4 and BMP formats. Can create chip regions for the reference files. Creates PDF files directly with export function. Drawings created using DualCAD can be called up by AutoCAD and MicroStation.
DualCAD may be used free of charge, even when deploying commercial applications.
Vendor by: Pangaea CAD Solutions
Website: http://pcscad.com/index.html
admin
| 6/16/2009 | 647
Views
|
|
| |
|
RhinoMan
(http://www.rhino3d.com/resources/display.asp?language=en&lis ting=9 )
|
|
RhinoMan is rendering plugin for several commercial RenderMan compatible renderers including Pixar's PhotoRealistic Renderman, AIR and RenderDotC, as well as free renderers like BMRT, 3Delight, and Aqsis.
Create renderings using these popular applications directly from Rhino.
Feature List: Reflections, soft shadows, custom shaders, global illumination (irradiance), HDRI, area lights, atmospheric effects, true displacement, texture mapping, multi-processor support, camera tools for common film and video formats.
admin
| 7/17/2008 | 194
Views
|
|
| |
|
SmartDraw
(http://www.smartdraw.com/downloads/index.htm?WT.svl=center_t ext_download )
|
|
SmartDraw Create business graphics. SmartDraw anticipates your needs giving you pre-drawn templates, automating design, and making it easy to turn your information into brilliant illustrations fast.
Features:
- Automatic Flowcharting
- Automatic Business Graphics of all Kinds
- Instant Graphic Design
- Express Charting
- ImageCharts
- Live Maps
- Integrated Photo Capability
- Microsoft Office Interoperability
- Create Floor Plans
admin
| 5/15/2008 | 186
Views
|
|
| |
|
3D Canvas
(http://www.amabilis.com/products.htm#item1)
|
|
Real-time 3D modeling and animation tool with a drag-and-drop approach. From Amabilis Software.
admin
| 12/31/1969 | 40799
Views
|
|
| |
|
Design Project Estimation Tool (DPET)
(http://www.designviz.com/Form_user.htm)
|
|
Estimating times and costs for engineering projects is essential to a company's success. Underestimate often enough and your company goes broke. And overestimating sends business to competitors. The difficulty in estimating a design job is partially due to CAD programs. "CAD is a huge multiplier of all the good and bad that engineers do, so the difference between estimated and actual time has the potential to be greater than ever before," says Stephen Samuel, president of Design Visionaries Inc., a product-design firm and CAD software reseller and trainer. He adds that the estimating problem is exacerbated because many people who quote jobs are not necessarily experienced CAD users.
To solve the problem, Samuel's team created the Design Project Estimation Tool (DPET). He says it captures his company's experience and the critical factors related to CAD that determine project schedules.
Users register to receive a password that gives access to the estimator. The software consists of about five input windows, each of which is fairly self-explanatory. The first screen deals with variables such as a single user's skill level. Samuel suggests that estimators know what work will be performed by beginners (slow users), those of average skill, and experts. The calculator is intended to account for the project work of a homogenous staff (all mechanical or electrical) with differences in skill level as accounted for in the first input section. But it seems you could run the calculator once for each skill group. The separate totals would be combined for the aggregate project time.
admin
| 12/31/1969 | 2222
Views
|
|
| |
|
IOSO NS
(http://www.iosotech.com/files/ns13/setup_ioso_ns_13.exe)
|
|
Powerful tool for nonlinear constrained optimization.You have an object, which should be improved by optimum coordination of several independent parameters, and executable mathematical model of this object, which computes its efficiency index depending on these parameters. Using IOSO NS 1.3, you can quickly and efficiently solve non-linear parametric optimization problem with dimensionality up to 5 independent variables and 5 functional inequality constraints. Family of IOSO NS versions utilizes set of heuristic self-organizing optimization algorithms. These algorithms are based on usage of owner-developed approximation technology. At every iteration of search for optimum response surfaces are being built for objective and constrained parameters, then these response surfaces are being optimized. Thus, the number of direct calls to mathematical model is minimized, and time expenditures for problem solution are also minimal. Using approximation technology makes it possible to solve successfully problems with complex topology of objective and constraints. Unlike the gradient methods, IOSO NS works robustly with discontinuous, non-differentiatable, noised and locally incomputable objectives and constraints. Software has friendly user interface. It doesn't require from user to be an expert in a field of numerical optimization. The number of algorithm settings available to be changed by user in IOSO NS program is minimal, all algorithm parameters are being adaptively changed during the process of search for optimum. The only thing required from user is to make a correct statement of optimization problem and prepare mathematical model input and output. IOSO NS has extended help system and samples of optimization projects with their source codes in FORTRAN for making it easier for you to begin work.
If you need the optimization tool for larger dimensionalities, you can purchase extended features for IOSO NS 1.3. These features allow you optimization with dimensionalities up to 20 independent variables and 20 inequality functional constraints. To do it you should contact IOSO Technology Center.
admin
| 12/31/1969 | 1800
Views
|
|
| |
|
Persistence of Vision Raytracer
(http://www.povray.org/download/)
|
|
A free tool for creating 3D graphics on Windows 95/98/NT, DOS, Macintosh OS, i86 Linux, SunOS and Amiga.
admin
| 12/31/1969 | 440
Views
|
|
| |
|
Vistool
(http://visualtoolbox.com/downloads/vistool_download/vistool6 .zip )
|
|
Vistool 6 is a 32 bit Multi Tasking Software for Vinyl Cutting, Rotary Engraving, Laser Marking and Laser Cutting. The Download includes, Basic Engraving (Freeware) with 10 fonts and Basic Vinyl Cutting (Freeware) with 50 fonts, these are fully working programs with basic industry functions to get you started. Also in the download are 60 day fully working trials of Vistool 6 Standard Engraving, Advanced Engraving, Advanced Vinyl Cutting with Cut and Print and Advanced Laser Vision programs.
These are 60 day fully functioning trial programs. There is a version of Vistool 6 available for all your Rotary and Laser Engraving, Roughting, Vinyl Cutting, Laser Cutting and Profile Milling needs. All Vistool 6 versions are able to be run on a Peer to Peer or Client Sever Network, Vistool 6 is an Industrial Strength program, for us by business large or small to produce high quality Visual Products, with speed and efficiency.
admin
| 12/31/1969 | 466
Views
|
|
| |
|
EasyCAD 2D Iris
(http://www.irisceramica.com/download/floor-plan-software/)
|
|
Vendor description: EasyCAD 2D Iris is a online home improvement software. EasyCAD 2D shapes your ideas to design your wall tile and flooring patterns without prior knowledge of computer graphics.
Features:
- Draw new ceramic tile patterns for wall and floor coverings
- Use one of the ready-made laying patterns out of the many available
- Generate high definition digital images
- Calculate the estimate of materials needed
- Save your makeover project as a JPEG file or print and show your drawings
Remember: to use this web-based program you need to stay online.
Vendor by: Iris Ceramica
Website: http://www.irisceramica.com/
admin
| 4/23/2009 | 737
Views
|
|
| |
|
MyQuote3D
(http://www.quickparts.com/Registration/MyQuotePages/Register Login.aspx?s_kwcid=08mkhpba10a )
|
|
Vendor description: MyQuote3D is STL viewer designed to give users a seamless transition between viewing, quoting and purchasing SLA, SLS, FDM and PolyJet parts.
Features:
- Instant quotes
- Find thin wall
- Identify CAD flaws
- View and quote assemblies
Vendor by: Quickparts
Website: http://www.quickparts.com/english_Quickparts_1.aspx?Page=/index.aspx
admin
| 10/30/2008 | 179
Views
|
|
| |
|
Autodesk Streamline
(http://usa.autodesk.com/adsk/servlet/index?siteID=123112&id= 8391775 )
|
Vendor description: Autodesk Streamline on-demand project management service helps you handle the process of collaborating with partners outside your organization, providing a single online location for storing, managing, and controlling project documents. With its intuitive interface, your extended team can work productively with customers and suppliers outside your firewall to get designs approved in less time.
Vendor by: Autodesk
Website: http://usa.autodesk.com/adsk/servlet/home?siteID=123112&id=129446
admin
| 10/16/2008 | 237
Views
|
|
| |
|
TXTCollector
(http://bluefive.pair.com/downloads.htm)
|
TXTCollector splice together a bunch of data files for import into a single spreadsheet for a customer application. Works with multiple script files, batch procedures, or even ASCII-based CAD data like DXF file. Easy to install and learn. Simple tool that allows you to work with multiple text files with full control.
Vendor by: Bluefive
Website: http://bluefive.pair.com/index.html
admin
| 6/28/2008 | 294
Views
|
|
| |
|
VizUp 3.2.3 Evaluation
(http://www.vizup.com/load/index.html)
|
|
Vendor Description: VizUp 3.2.3 Evaluation is designed specially for game developers, architects, and 3D designers. Use to reduce polygons and optimize 3D models, and presentations before publishing them on the Web. VizUp simplifies LOD generation for games and virtual reality. Saves time-consuming routine operations.
Features:
- High quality of complex model optimization
- Extremely simple and user-friendly
- Optimization is performed automatically, no parameter tuning necessary
- Decrease the number of polygons dramatically without loosing quality
- Perform optimization only once - simultaneously for all possible reduction ratios
- Visual control for model tuning during the process of optimization
- Built-in 3D viewer is intuitive and lets you examine your model
- Supports Wavefront .OBJ, VRML 2.0/97 and StereoLitho (STL) file formats
Vendor by: VizUp
Website: http://www.vizup.com/index.html
admin
| 12/18/2008 | 394
Views
|
|
| |
|
InfoWorks RS Free Edition
(http://www.wallingfordsoftware.com/products/infoworks_rs_fre e_edition/ )
|
|
Vendor description: InfoWorks RS free edition is a 250-node edition of the InfoWorks RS 1D modeling solution for river and coastal systems.
Provides the ideal introduction to river modeling for small flood risk assessments, localized flood mapping updates and refinements, assessing bridge afflux, small flood defense and river engineering design, catchments flood and surface water resource management plans, receiving water impact studies and river restoration design.
InfoWorks RS free edition includes all the core 1D modeling functionality of the full version of InfoWorks RS but is limited to building and running individual model networks of up to 250 nodes.
Vendor by: Willingford Software
Website: http://www.wallingfordsoftware.com/
admin
| 1/15/2009 | 497
Views
|
|
| |
|
PDFCreator
(http://sourceforge.net/projects/pdfcreator/)
|
PDFCreator easily creates PDFs from any Windows program. Use it like a printer in Word, StarCalc or any other Windows application. It features auto-naming and auto-saving for batch plotting.
Vendor by: SourceForge
Website: http://sourceforge.net/
admin
| 1/22/2009 | 324
Views
|
|
| |
|
Engineering Unit Converter
(http://www.engineering.com/Default.aspx?grm2id=42&tabid=74)
|
Vendor description: Engineering Unit Converter is easy-to-use unit conversion program. It features more than 400 conversion factors for use in most engineering disciplines. The program allows you to select the conversion type for easy location of conversion factors. It also allows the user to add new conversion factors and conversion types. The selection of significant digits maintains accurate conversions.
Vendor by: Engineering.com
Website: http://www.engineering.com/Home/tabid/36/Default.aspx
admin
| 1/27/2009 | 312
Views
|
|
| |
|
Personal PBS
(http://www.personalpbs.com/PBSPersonal.aspx?top_nav_name=Pro ducts&item_name=Personal%20PBS )
|
|
Personal PBS is a free turnkey application that leverages multi-core CPU technology to easily transform any desktop computer into a miniature compute farm or cluster system. Personal PBS also provides an easy upgrade path that enables customers to submit jobs from their personal desktop to backend server systems running PBS Professional.
Altair expects this new product to appeal to the open-source community, academia, small and medium-size businesses, and corporate clients who want to maximize local desktop performance.
Once you teach Personal PBS about the applications you use (in engineering, biotechnology, finance, electronics, animation, etc.) it automatically fills in default parameters to make job submission truly turn-key. You can monitor progress, rearrange priorities, and cancel unwanted work right from the Personal PBS icon in the taskbar.
Vendor by: Altair
Website: http://www.altair.com/Default.aspx
admin
| 2/5/2009 | 253
Views
|
|
| |
|
General CADD Indexer
(http://www.generalcadd.com/plugin-1.htm)
|
|
Vendor description: General CADD Indexer is a free Google desktop search plug-in. This utility program indexes files on your Windows PC and displays the results in a Google search page.
The Plug-In adds the ability to Google desktop search to look inside DWG, DXF, DGN, AutoCAD 2008 file format, General CADD .GXD, Generic CADD .GCD and Visual CADD .VCD files and extract searchable text strings for inclusion in the file description index. Allows you to search for CAD files on your computer based on text strings contained within the CAD file.
Vendor by: General CADD
Website: http://www.generalcadd.com/
admin
| 2/5/2009 | 367
Views
|
|
| |
|
ASC2GXM Surveyor's Utility
(http://www.generalcadd.com/downloadsasc2gxm.htm)
|
|
ASC2GXM is a free utility addition to General CADD Pro which will perform many of the functions of 'The Draftsman', a program popular among surveyors using Generic CADD in MSDOS.
ASC2GXM will convert the ASCII output of a surveyor's total station for display, annotation and editing in General CADD Pro. ASC2GXM will convert and display points, point numbers, point labels, coordinates, elevations, lines, CW and CCW arcs, random 3 point arcs and complex curves. Once this information is displayed in General CADD Pro, bearing and distance labels can be added through the use of special surveyor's commands already available in the General CADD program.
PT2ASC utility program is included with ASC2GXM, which affords a simple and fast way to export points from GCP, annotate them and save to an ASC file for transfer back to a data recorder.
Vendor by: General CADD
Website: http://www.generalcadd.com/
admin
| 2/8/2009 | 418
Views
|
|
| |
|
i-Know 2D v3.3
(http://www.ccim.nl/iKnow2d.htm)
|
|
Vendor description: I-Know 2D creates full isometric 2D drawings from complex 3D models with only one-button-press. By using the STL file format as input, i-Know 2D is compatible with virtually every CAD system
Features:
- One-button-press drawings
- Easy file browsing by auto-scan and preview
- View selection in both 3rd angle and 1st angle projection
- Add and edit measurements
- Export drawing to DXF or EMF
- Customize title blocks with your project information and logo
- Print/Plot drawing on various standard ISO or US/ANSI paper size
Vendor by: CCIM
Website: http://www.ccim.nl/index.htm
admin
| 3/12/2009 | 364
Views
|
|
| |
|
Google Earth Extension for AutoCAD
(http://labs.autodesk.com/utilities/google_earth_extension_be ta/ )
|
Vendor description: Google Earth Extension for AutoCAD, Architecture, Civil 3D, Map 3D is a simple wizard-driven interface to publish your 3D models from AutoCAD or select Autodesk product to Google Earth. The technology preview is available for 2007, 2008, 2009, and 2010 versions.
Vendor by: Autodesk Labs
Website: http://labs.autodesk.com/
admin
| 4/9/2009 | 290
Views
|
|
| |
|
Copan for Windows
(http://www.underhill.ca/Software/Copan/Windows/CopanWin.php)
|
Land surveyors and civil engineers:- Calculate surveys and manage points, effortlessly
- Run Copan on Windows 2K/XP/Vista/7
- Use it forever and pay nothing
- Choose quadrant bearings or N/S azimuths, and gons or DMS
- Create point files quickly and easily
- Edit any point's number, name, coords, code or note
- Specify groups of points for listing or processing
- Edit points: renumber, delete, lock, convert to 2D
- Transform coordinates:
- Specify rotation, scale and shift parameters of transformation
- Compute best-fit transformation between sets of points
- Import/export points from/to character-separated value or fixed format ASCII files
- Export points to Geodimeter or Leica total station files
- COGO using points, bearings, and distances and offsets:
- Direct and inverse
- Corner angle
- Bearing-bearing intersection
- Distance-distance intersection
- Bearing-distance intersection
- Express bearings and distances via point numbers
- Calculate multiple inverses from one to many points:
- Angles and distances
- Bearings and distances
- Chainage and offsets
- Process field survey data:
- Calc and adjust traverses and radials, via HAs, VAs and SDs
- Calc and adjust traverses and radials, via bearings, VAs and SDs
- Calc Freestations via HAs, VAs and SDs
- Manually edit data
- Import from Geodimeter JOB, TDS RAW, Nikon RAW, Leica GSI, Wild GRE
- Export to GeoLab IOB
- Process map data, even those describing curves:
- Calc and adjust traverses, areas and perimeters, via points, bearings and distances
- Check traverses, areas and perimeters, via bearings and distances
- Calc traverses, areas and perimeters, via points
- Export to ESRI Traverse format
- Apply azimuth correction, scale factor or units factor to any calc
- List points or results to a text editor
- Plot points, at any scale, to any printer
Vendor by: Underhill Geomatics
Website: http://www.underhill.ca/index.php
admin
| 5/7/2009 | 520
Views
|
|
| |
|
WinTopo Freeware
(http://www.wintopo.com/wintopo-free.htm)
|
|
Vendor description: WinTopo Freeware is a software application for converting various file formats and scanned images into useful vector files suitable for CAD, GIS and CNC applications.
WinTopo Freeware is the complete solution for users wanting to do small volumes of raster to vector conversion.
Features:
Load BMP, TIF, GIF, JPG and PNG raster files
Perform raster thinning, or edge detection
Vectorizer for thinned raster to single color vectors
Color vectors
View the vectors overlaying the raster
Scale the vector drawing
Save the vectors to DXF, SHP, MIF, WMF or other vector formats
Vendor by: SoftSoft Ltd
Website: http://www.wintopo.com/
admin
| 6/4/2009 | 339
Views
|
|
| |
|
WireFusion Free Edition
(http://www.demicron.com/download/free.html)
|
Vendor description: WireFusion Free Edition is a powerful technology that allows for quick creation of interactive 3D presentations for the internet.
WireFusion is typically used by designers, programmers, architects and product companies, and mostly for internet marketing and e-commerce, creating 3D configurators, visualizing product design and architectural design. WireFusion presentations are also used for e-learning or computer based training (CBT), training sales forces, support teams and for customer support.
Vendor by: Demicron
Website: http://www.demicron.com/index.html
admin
| 7/9/2009 | 289
Views
|
|
| |
| In
category Architectural Programs |
| |
|
STL Exporter for Revit Platform 2009
(http://labs.autodesk.com/utilities/revit_stl/)
|
|
Vendor description: STL Exporter for Revit Platform 2009 create 3D prints of Revit 2009 models. As architects and engineers start their digital designs earlier and keep them digital for longer, they want a way to still physically interact with their designs.
With the economical availability of 3D printers this has become possible. 3D printed models increasingly serve as a critical part of the design process to study design options and improve communication between project members and owners.
The STL Exporter for the Revit 2009 family of products is a proof of concept project. It is designed to take a 3D Revit building information model and create an STL file that can be used for 3D Printing.
admin
| 9/18/2008 | 256
Views
|
|
| |
|
VE-Ware
(http://www.iesve.com/content/default.asp?page=s133)
|
|
Vendor description: VE-Ware is tool from IES that calculates a building's energy consumption and carbon emissions, It also benchmarks the building against the Architecture 2030 challenge if located in USA.
It is suitable for use in all regions of the world as it uses international data on dynamic conditions and the typical characteristics of different building, room and system types. Also suitable to residential projects.
VE-Ware is accessed via Autodesk Revit or Google SketchUp.
admin
| 8/27/2008 | 210
Views
|
|
| |
|
VisualARQ
(http://www.rhino3d.com/resources/display.asp?language=en&lis ting=4424 )
|
|
VisualARQ is a plugin for Rhino, specifically designed for the architectural sector.
It provides the tools to create and edit architectural plans, and to work with parametric 3D Objects - such as walls, doors, windows, columns, slabs, roofs, stairs and railings making the architectural design process and its documentation much easier to handle.
admin
| 7/17/2008 | 224
Views
|
|
| |
|
Cycas
(http://www.cycas.de/)
|
|
Architectural software for drafting and design in 2D and 3D, free for noncommercial use.
admin
| 12/31/1969 | 19802
Views
|
|
| |
|
DesignWorkshop Lite
(http://www.artifice.com/free/lite_download_reg.html)
|
|
DesignWorkshop Lite software package provides all you need to build your own 3D models for home design and visualization of architecture, landscapes, exhibits, or any kind of spatial design. View and walk-through ready-made models of any size, like 3D building models in the great buildings online, in DXF or 3DMF format.
DesignWorkshop Lite can be used on any Macintosh in the Classic environment, or any Pentium PC running Windows 95/98/ME/NT/XP/2000
admin
| 5/15/2008 | 2801
Views
|
|
| |
|
Room Arranger
(http://www.roomarranger.com)
|
|
For simple room layouts, by Jan Adamec .
admin
| 12/31/1969 | 742
Views
|
|
| |
|
AecBatchStylesEditor 2009 Evaluation
(http://www.cadaptation.com/home/index.php?option=com_docman& task=cat_view&gid=32&Itemid= )
|
|
Vendor description: AecBatchStylesEditor 2009 is a relatively new program that works with AutoCAD Architecture and AutoCAD MEP to configure, implement, maintain, and upgrade CAD standards. Control large libraries of Styles and Definitions, allowing batch-edit the internal settings of multiple AEC styles in a single process.
Features
- Property sets editing
- Materials editing
- Classifications editing
- Display properties editing
- Preferences
AecBatchStylesEditor 2009 Evaluation is freely distributable version, used as a means to evaluate the features and usage of the applet. It is fully-functional with regard to features and number of uses, with one restriction, all batch edits are limited to a single object type to edit: mass element styles. Object type is applicable to both AutoCAD Architecture and AutoCAD MEP host application platforms, and utilizes all of the components of AEC Styles and definitions that AecBatchStyesEditor may edit. Property set definitions, materials, classifications, and display properties.
admin
| 9/4/2008 | 2530
Views
|
|
| |
|
ArchiCAD Educational Version
(http://www.graphisoft.com/)
|
|
Graphisoft's ArchiCAD 11 delivers new and enriched capabilities designed to help architects develop their concepts, compete for business more effectively and boost efficiency.
ArchiCAD 11 is most popular Virtual building solution for architects. The ArchiCAD educational version is a fully-functional copy of the commercial version, with the only exception that it prints a watermark-style logo onto all ArchiCAD project files created or opened with the ArchiCAD student version. It gives students the ability to create great architecture and increase productivity
admin
| 8/28/2008 | 8180
Views
|
|
| |
|
Virtual Construction Software Students Version
(http://www.vicosoftware.com/Downloads/Student_Version/tabid/ 50483/Default.aspx )
|
|
Vendor description: Vico Software offers fully functional Software to Students and Teachers, Virtual Construction software and services help building owners, general contractors reduce risk, manage cost and shorten project schedules. Vico Software’s 5D technology provides unprecedented integration of design, construction and management processes, thus improving project predictability - providing early identification of constructability problems; and synchronizing design, cost and schedule. Vico Software has a proven track record of delivering results.
The software bundle includes the following software packages:
Vico Software Constructor
Vico Software Estimator
Vico Software Control
Vico Software 5D Presenter
Vico Software Cost Manager
For a one-year, renewable license. You only need to provide Vico Software with proof of your student or teacher status to receive your one-year license.
admin
| 9/1/2008 | 1695
Views
|
|
| |
|
Driving Dimensions for Google SketchUp
(http://drivingdimensions.com/SketchUp/download.php)
|
|
Vendor description: Driving Dimensions is a plug-in application for Google SketchUp 6 and SketchUp Pro 6, a free, easy-to-learn 3D-modeling program with a few simple tools that you can use to add driving dimensions to SketchUp models. Driving Dimensions plug-in is powered by the LGS (LEDAS Geometric Solver) variational geometric solver and combines the flexibility of constraint-based geometric modeling. After simple installation process (just run ldd_setup_v0'.exe and follow the instructions), run SketchUp and find a new toolbar with Driving Dimensions. The first time user can control the dimensions of shapes with no knowledge of variational design concept. Even more productivity can be achieved by using different tools available with Driving Dimension plug-in.
Vendor by: LEDAS
Website: http://drivingdimensions.com/
admin
| 10/30/2008 | 393
Views
|
|
| |
|
wxSU
(http://wxsu.sourceforge.net/)
|
|
Vendor description: wxSU is a free, open source plugin for Google SketchUp 6 that extends the SketchUp API with the capabilities of wxRuby. wxSU bundles wxRuby to provide a cross-platform, pure Ruby solution for implementing GUI dialogs in your SketchUp plugins.
The SketchUp API provides GUI dialog support using dynamic HTML via an embedded web browser. wxSU gives you an alternative way to create dialogs for your plug-in. The wxSU interface layer allows wxRuby and SketchUp to work together seamlessly.
Features:
- Bundles the wxRuby engine as a SketchUp plugin
- Resolves threading issues between SketchUp's Ruby interpreter and the wxRuby engine
- Assigns wxRuby windows to recognize the SketchUp window as its parent
Website: http://wxsu.sourceforge.net/
admin
| 10/30/2008 | 318
Views
|
|
| |
|
Archimedes
(http://archimedes.en.softonic.com/palm/download#pathbar)
|
Vendor description: 'rchimedes is a C'D software focused on architecture. It is developed by a team of Computer Science students in collaboration with professional architects. Having easy to use features for architectural students.
Vendor by: Archimedes
Website: http://archimedes.incubadora.fapesp.br/portal
admin
| 10/2/2008 | 2095
Views
|
|
| |
|
SU Podium 1.6
(http://www.suplugins.com/index.php?p=page&page_id=Download)
|
|
Vendor Description: SU Podium is photo-realistic rendering utility for Google SketchUp model. Podium runs completely inside Google SketchUp from start to finish. It uses SketchUp features such as textures, background colors, groups and shadows to achieve impressive results.
Podium is intuitive to SketchUp users, with simple interface and easy to learn. SU Podium works with Google SketchUp 6 and 7, Pro or Free, Windows or Mac.
Features:
- Alpha transparency is supported
- Plants and trees library
- Render all scenes
- Higher resolution image size
- Updated light fixture library
The free version will not expire. The free version is exactly the same as the commercial version Except it only outputs to 230 X 120 and 500 X 500 image resolution sizes. Available for Windows and Mac OS X 10.5.
Vendor by: SU Podium
Website: http://www.suplugins.com/index.php?p=home
admin
| 12/18/2008 | 258
Views
|
|
| |
|
Vue 7 Pioneer
(http://www.e-onsoftware.com/products/vue/vue_7_pioneer/?page =download )
|
e-on software's open beta of Vue 7 Pioneer is entry-level software for 3D artists and small studios. The software is used to create vast expanses of terrains, add trees, and render hyper-realistic images of landscapes.
Vendor by: e-on software
Website: http://www.e-onsoftware.com/
admin
| 1/8/2009 | 343
Views
|
|
| |
|
The RevitTV.com Drawing Manager
(http://www.revittv.com)
|
|
The RevitTV.com Drawing Manager is utility to manage your drawing sheets in Autodesk Revit.
Features:
- Track and record all drawing issues and revisions
-
Automatic drawing sheet creation inside Revit
-
Supports multiple drawing sheet templates
- Customizable parameter tables
-
Automated shared parameter management
Vendor by: RevitTV.com
Website: http://www.revittv.com
admin
| 1/22/2009 | 454
Views
|
|
| |
|
CADspan Plugin
(http://www.cadspan.com/download)
|
|
CADspan Plugin is a Google SketchUp utility, that allows generation of Solid, 3D printable STL files directly from a Google SketchUp model.
The plugin provides several tools to ease the process of preparing a model for 3D printing.
Features:
- Resurfacer: shrinkwrap a model into one continuous, solid me
- 3D Print visualization style: a visual style that highlights problem areas in a model
- Layerize tool: easily move all geometry within components and groups to a layer
- Smooth/Unsmooth: toggle smoothing on a model's rounded geometry
Vendor by: CADspan
Website: http://www.cadspan.com/
admin
| 2/24/2009 | 408
Views
|
|
| |
|
Sweet Home 3D 1.6
(http://www.sweethome3d.eu/download.html)
|
|
Vendor description: Sweet Home 3D 1.6 is a interior design application. The program runs on Java and has an open source code.
Sweet Home 3D provides an opportunity to preview the interior in 2D (top view) and helps to visualize the final version of furniture in 3D. The latest version adds ability to import 3D-models.
Supports Windows, Mac OS X 10.4/10.5, Linux, Solaris operating systems.
Vendor by: eTeks
Website: http://www.sweethome3d.eu/index.html
admin
| 3/5/2009 | 603
Views
|
|
| |
|
gMarkers
(http://www.nemetschek.net/community/addons/plugins/gmarkers. php )
|
|
Vendor description: gMarkers is a Vectorworks plug-in objects that create architectural sheet symbols.
Features:
Markers are always the same size regardless of layer scale
Text is easily modified through the object info palette
Elevation marker can be configured to display as an elevation/section or detail marker
Vendor by: Nemetschek - Submitted by Geoff Grummon
Website: http://www.nemetschek.net/index.php
admin
| 4/2/2009 | 368
Views
|
|
| |
|
gWindow
(http://www.nemetschek.net/community/addons/plugins/gwindow.p hp )
|
|
Vendor description: gWindow is a Vectorworks plug-in object that creates 2D/3D window objects. While it is simpler than the window objects that come with Vectorworks, it offers a several improvements, including:
- All attributes (lineweight, fill, colors) of each part of the window can be controlled through classes
- Each window object can have any number of units horizontally or vertically
- All parts of the window object are assigned to a class, allowing for easier export to rendering programs
Vendor by: Nemetschek - by Geoff Grummon
Website: http://www.nemetschek.net/index.php
admin
| 4/2/2009 | 376
Views
|
|
| |
|
Mathcad-Revit Integration
(http://www.ptc.com/appserver/wcms/forms/index.jsp?im_dbkey=8 5994&icg_dbkey=482 )
|
Vendor description: Mathcad-Revit Integration is a solution for building architects and designers. Revit as the front end CAD design software and Mathcad as the analysis engine providing knowledge capture.
Vendor by: PTC
Website: http://www.ptc.com/
admin
| 4/24/2009 | 320
Views
|
|
| |
|
Envisioneer Express 5.0
(http://www.envisioneerexpress.com/)
|
|
HTML clipboard Vendor description: Envisioneer Express 5.0 is a residential design program.
Envisioneer Express is the free version of Envisioneer Professional 5.0, the
well known architectural design system.
Envisioneer Express has been specifically developed to introduce clients to
the simple creation of floor plans, 3D models, and interior design concepts.
EnvisioneerExpress uses real world objects such as walls, doors, windows, and
stairs to make creative designs fast and easy.
EnvisioneerExpress can also be used to display and review professional models
made by many other popular design software packages including Envisioneer and 3D
Home Architect.
Installs on: Windows 2000/XP/Vista
Vendor by: CadSoft
Website: http://www.cadsoft.com/index.php
admin
| 5/28/2009 | 1258
Views
|
|
| |
|
SmartDraw
(http://www.smartdraw.com/downloads/index.htm?WT.svl=link03)
|
Vendor description: SmartDraw is an easy floor plans software to design home, office, desk or landscape.Start with the exact template you need. Add your information and SmartDraw does aligning everything and applying professional design themes.
Features:
- Exhaustive symbol library
Vendor by: SmartDraw
Website: http://www.smartdraw.com/exp/fpn/
admin
| 7/9/2009 | 446
Views
|
|
| |
|
Parking
(http://www.smustard.com/script/Parking)
|
Vendor description: Parking is a plugin for Google sketchUp to create parking lot lines with two clicks.
Vendor by: Smustard.
Website: http://www.smustard.com/
admin
| 7/21/2009 | 275
Views
|
|
| |
|
Bomb
(http://www.smustard.com/script/Bomb)
|
Vendor description: Bomb is a utility for Google sketchUp for exploding all groups and components in the model.
Vendor by: Smustard
Website: http://www.smustard.com/
admin
| 7/23/2009 | 336
Views
|
|
| |
|
CenterPoint
(http://www.smustard.com/script/CenterPoint)
|
Vendor description: CenterPoint is a Google sketchUp plugin to add a construction point to the middle of your selection.
Vendor by: Smustard
Website: http://www.smustard.com/
admin
| 7/23/2009 | 336
Views
|
|
| |
|
ChamferAlongPath
(http://www.smustard.com/script/ChamferAlongPath)
|
Vendor description: ChamferAlongPath is an add-on for Google sketchUp that can add chamfer to the joined lines, arcs, circles and curves.
Vendor by: Smustard
Website: http://www.smustard.com/
admin
| 7/23/2009 | 286
Views
|
|
| |
|
GroupByLayer
(http://www.smustard.com/script/GroupByLayer)
|
Vendor description: GroupByLayer is a utility for Google SketchUp that explodes all groups and components and regroups all entities by layer.
Vendor by: Smustard
Website: http://www.smustard.com/
admin
| 8/18/2009 | 266
Views
|
|
| |
|
GroupByTexture
(http://www.smustard.com/script/GroupByTexture)
|
Vendor description: GroupByTexture is a plug-in for Google SketchUp that groups faces by texture for exporting it to other 3D software's.
Vendor by: Smustard
Website: http://www.smustard.com/
admin
| 8/25/2009 | 279
Views
|
|
| |
|
HideAll
(http://www.smustard.com/script/HideAll)
|
Vendor description: HideAll is a utility for Google SketchUp to hide all the unselected Objects in your model.
Vendor by: Smustard
Website: http://www.smustard.com/
admin
| 8/25/2009 | 311
Views
|
|
| |
|
HideTool
(http://www.smustard.com/script/HideTool)
|
Vendor description: HideTool is an add-on for Google SketchUp to hide anything and everything you left click on.
Vendor by: Smustard
Website: http://www.smustard.com/
admin
| 8/25/2009 | 271
Views
|
|
| |
| In
category CAD Programs - xNIX |
| |
|
PythonCAD
(http://www.pythoncad.org/download.html)
|
|
PythonCAD is a CAD package written using Python. Open-source, easy to use CAD package for Linux, various flavors of BSD Unix, commercial Unix, and other platforms.
Features:
- Move
- Layers
- Split
- Rotate
- Stretch
- Undo
- Draw dimensions
- Command line for entering commands
- Draw points, lines, rectangles, circles, arcs, polygons, text
- Draw with the following units: micrometers, millimeters, Meters, Kilometers, Inches, Feet, Yards, Miles
- Set preferences for Units, colors, line thickness, Object sizes, text and dimensions
- Select All by object type
- Zoom in, out, window, fit
- Draw fillets and chamfers
- Styles: Linetype (solid, dashed), color, thickness
- Open, Save in XML format, and Print drawings
admin
| 9/25/2008 | 2520
Views
|
|
| |
| In
category AutoCAD Utilities |
| |
|
Bearingn/Distance inverse
(http://www.kwic.com/~crowell/files/inv.zip)
|
Small Autolisp utility for inversing from point to point to display the bearing and distance.
Vendor by: Kwic
admin
| 12/31/1969 | 430
Views
|
|
| |
|
Converts attributes to text
(http://www.cadxp.com/goodies/upload/att2txt_demo.zip)
|
This LISP program converts an attribute into a text object.
Vendor by: CADXP
admin
| 12/31/2008 | 349
Views
|
|
| |
|
Display blocks name
(http://www.cadxp.com/goodies/upload/affiche_nom_blocs_demo.z ip )
|
This LISP program dispays block names as vectors.
Vendor by: CADXP
admin
| 12/31/2008 | 367
Views
|
|
| |
|
Display named views
(http://www.cadxp.com/goodies/upload/voir_vue_demo.zip)
|
This LISP program displays named views as vectors.
Vendor by: CADXP
admin
| 12/31/2008 | 248
Views
|
|
| |
|
Metric_English
(http://www.freecad.com/files/metricenglish.zip)
|
This Autolisp program defines a command called metric_english. With the help of this command you can change the default settings of AutoCAD from Metric to English units vice versa. The command uses a dialog box.
Vendor by: CADpanel
admin
| 12/10/2007 | 343
Views
|
|
| |
|
Thickens
(http://www.cadxp.com/goodies/upload/epaissir_demo.zip)
|
This LISP program transforms lines, circles, arcs, polylines and ellipses into thick polylines.
Vendor by: CADXP
admin
| 12/31/1969 | 327
Views
|
|
| |
|
Autodesk DWF Toolkit 7.5
(http://usa.autodesk.com/adsk/servlet/index?id=823771&siteID= 123112 )
|
|
Vendor description: Autodesk DWF Toolkit 7.5 provides APIs for reading and writing DWF files, the new Microsoft XML Paper Specification (XPS) compatible DWFx files. The toolkit includes cross-platform support (Windows, Linux) and 32-bit and 64-bit environment support. Also provided is the C++ source code. This version of the toolkit handles DWF files generated by AutoCAD 2009 and other Autodesk design software.
admin
| 9/4/2008 | 252
Views
|
|
| |
|
Converts attributes to text
(http://www.cadxp.com/goodies/upload/att2txt_demo.zip)
|
|
This LISP program converts an attribute into a text object.
admin
| 12/31/1969 | 215
Views
|
|
| |
|
Dim Conti
(http://www.nyacad.com/HandyAutoCAD/DimConti.html)
|
|
The program designed as an alternate to DimAligned and Qdim AutoCAD commands.Include two files Dim Conti.lsp and Dim Conti.dvb
admin
| 6/19/2008 | 348
Views
|
|
| |
|
Display blocks name
(http://www.cadxp.com/goodies/upload/affiche_nom_blocs_demo.z ip )
|
|
This LISP program dispays block names as vectors.
admin
| 12/31/1969 | 188
Views
|
|
| |
|
Display named views
(http://www.cadxp.com/goodies/upload/voir_vue_demo.zip)
|
|
This LISP program displays named views as vectors.
admin
| 12/31/1969 | 172
Views
|
|
| |
|
AutoCAD Symbols & CAD Blocks
(http://www.autocadblock.com/morefreeblocks.htm)
|
|
AutoCAD Symbols & CAD Blocks are free to download utilities for AutoCAD, consisting 3D blocks, Mechanical blocks, Architectural Libraries
Includes:
- 3D bathtubs, refrigerator, toilets
- Automobiles in 3D wire frame
- Draw only the pipe route
- Furniture blocks
- Bolt types drawing library
- Road, tree symbols
- Extensive wood detail library
- Office furniture Compatibility
- Machine symbol
- All zip file available for easy installation
admin
| 7/24/2008 | 1324
Views
|
|
| |
|
Bubble for AutoCAD
(http://www.bubblecad.com/en/bubble.htm)
|
|
Vendor description: Tool for the AutoCAD users that displays the properties of any object in the drawing at any time. There's no need to run a command or go to a toolbar. Just move the mouse cursor over an object, wait a second to get information about element, the object type, name, layer, color, and other properties you can select from a complete list for each object. Without running any command and is hassle free.
Features:
- Works with AutoCAD 14 thru AutoCAD 2009
- Automatic installation
- Plug-in interface
- Runs in background.
- Works like Windows tooltips
- Can be disabled if not needed
- Customizable list of properties shown for each entity
- Configurable interface: colors, pause times, etc
admin
| 8/7/2008 | 399
Views
|
|
| |
|
DevConv
(http://www.devcad.com/eng/tools.htm)
|
DevConv, the freeware DXF, DXB, DWG converter DevConv is a stand-alone tool, it DOES NOT require AutoCad. DevConv supports all new versions of DWG/DXF/DXB files (R9 to R2006/2007 formats). DevConv does not require any installation: simply download it and run it. DevConv supports command line!
Vendor by: Devcad
Website: http://www.devcad.com/eng/tools.htm
admin
| 9/29/2008 | 500
Views
|
|
| |
|
Navigation Tool for AutoCAD
(http://labs.autodesk.com/utilities/acad_navigation_bonus/)
|
|
This tool provides back and forward display navigation within AutoCAD. The behavior is similar to back and forward navigation within your web browser. It basically tracks what you're looking at in AutoCAD. Any time you want to go back to something you were looking at previously, just hit the back button. Similarly, click the forward button to navigate forward again. The following items are tracked and added to the history while you work:
Active drawing switch
Layout switch
View changes such as zoom, pan ...etc
Active viewport switch
Viewport maximize/minimize
Ways of accessing this functionality:
Toolbar: Note back/forward arrows in the upper left corner of the AutoCAD window
Mouse: If your mouse has buttons that allow forward and backward navigation in your web browser, they can be used for this purpose in AutoCAD as well.
Keyboard shortcut: [ALT]+[LEFTARROW] and [ALT]+[RIGHTARROW]
Commands: NAVBACK and NAVFORWARD
The tool works with the AutoCAD 2008 and 2009 family of products.
admin
| 9/11/2008 | 341
Views
|
|
| |
|
Quick Hatch
(http://www.nyacad.com/Download.htm)
|
|
Vendor description: Quick Hatch is set of AutoLISP and VBA commands for quick Hatching in AutoCAD using auto assignment of hatch parameters.The program also includes custom Hatch pattern for adding rail pickets in drawing, which is a time consuming task. Array-copy-trim-extend combination of commands can be replaced with just one hatch command. Area of added pickets is flexible for modifications (associative hatch).
admin
| 4/4/2008 | 359
Views
|
|
| |
|
TableBar
(http://www.cadig.com/products/tablebar.php)
|
|
Vendor description: TableBar streamlines the process of creating/editing tables and controlling their properties so you can focus on content. Makes it easy to create accurate table and change any property of table using a table toolbar.
Integrate all table commands in AutoCAD 2005/2006/2007 into a toolbar, just like the table toolbar in Microsoft Word. It is based on AutoCAD 2005 or later AcDbTable object.
admin
| 6/28/2008 | 296
Views
|
|
| |
|
Thickens
(http://www.cadxp.com/goodies/upload/epaissir_demo.zip)
|
|
' 'his LISP program transforms lines, circles, arcs, polylines and ellipses into thick polylines. ' '
Vendor by: CADxp
Website: http://cadxp.com/
admin
| 12/31/1969 | 186
Views
|
|
| |
|
Very Quick Leader
(http://www.nyacad.com/Handy%20AutoCAD-4.html)
|
|
The set of AutoLISP and VBA commands for faster adding leaders in AutoCAD. Type K (or LL) at the command prompt and press Enter to add leader with attached text. Leaders added with this command are attached to annotation and very flexible for modifications (move or mirror annotation). Instead of select by crossing and stretching leader with text you can click on text and use move or mirror command. The leader will follow. What the command will do: - Store current setting: DimStyle, DimScale and Ortho mode
- Import Dimstyle VQLeader from template and make it current, set current dimstyle to ‘VQLeader’
- Adjust automatically current DimStyle with regard to the value of Dimscale and active space (model or paper)
- After adding the leader (the number of prompts is less than with standard AutoCAD command) the program will restore DimStyle, Ortho mode and DimScale
For leaders without annotations type L2, L3 or L4 at the command prompt to add 2, 3 or 4 points leader.
Vendor by: NYacad Inc.
Website: http://www.nyacad.com/
admin
| 6/19/2008 | 329
Views
|
|
| |
|
3D/2D ShareNow Add-in for AutoCAD, Inventor, Revit, and Design Review
(http://labs.autodesk.com/utilities/ShareNow/)
|
Vendor description: These add-ins publish a design from AutoCAD, Inventor, Inventor LT, Revit, or Design Review to the Project Freewheel server. With one click of the ShareNow icon, your design application will publish a DWF file of your current design, upload it to Project Freewheel, and invoke the browser with a view of your design. You can then leverage all of the benefits that Project Freewheel has to offer - without installing additional software. Collaborate with your team members on Microsoft Windows, Apple Macintosh OSX, or Linux. They can use Internet Explorer or Firefox. They can use a PC, Mac, PDS, Cell phone whatever has a compatible browser with an internet connection.
Vendor by: Autodesk Labs
Website: http://labs.autodesk.com
admin
| 11/6/2008 | 555
Views
|
|
| |
|
RP Export for AutoCAD
(http://www.openrp.com/products/rp_export_ac/index.htm)
|
|
RP Export for AutoCAD is a free RP file export plug-in. Gives AutoCAD the ability to export geometric data from AutoCAD to RP files. RP Export for AutoCAD extracts facet data from 3D Solids in the active AutoCAD drawing and exports it to a RP file.
Easy to use tool. Once installed, it must be loaded into the AutoCAD environment. Once loaded it adds new commands to AutoCAD's existing commands and a new submenu called 'RPExport' to the AutoCAD menu containing these newly added commands.
Vendor by: SYCODE
Website: http://www.sycode.com/
admin
| 10/2/2008 | 312
Views
|
|
| |
|
Group Toggle v1.1.007
(http://www.pxcad.com/downloads/autocad2007-plus.aspx)
|
|
Group Toggle version 1.1.007 is a program to toggle the group selection variable 'PICKSTYLE' on and off and to display the current group selection status.
The idea behind this program is to show the status of group selection without any user input. If you use the group command in AutoCAD this tool is indispensable, when the command is initiated a toggle button is displayed on the status bar on the right side of the AutoCAD status bar buttons.
The PxCad Group Toggle button acts in the same manor as the other AutoCAD buttons. When the button is shown pressed, group selection is on, if the button is out group selection is off. To change the group selection status you simply press the group button, you can also use these following commands to change the status of group selection.
Keyboard commands: Ctrl-H, Ctrl-Shift-A
PxCad Group Toggle button is sensitive to all changes to group selection, so if group selection is altered by some other means other than pressing the button the PxCad Group Toggle button will always display the correct status of group selection.
Buit for Autocad 2007, 2008, 2009.
System requirements .Net framework version 3.5
Vendor by: PxCad
Website: http://www.pxcad.com/home.aspx
admin
| 9/11/2008 | 239
Views
|
|
| |
|
Landscape Symbols
(http://www.dailyautocad.com/download/16-landscape-symbols-in -2d-plan-view/ )
|
|
Vendor Description: AutoCAD tree and part landscape symbols for 2D plan view.
Vendor by: Daily AutoCAD
Website: http://www.dailyautocad.com/
admin
| 12/28/2008 | 492
Views
|
|
| |
|
Print3D for AutoCAD
(http://www.print3dcorp.com/)
|
|
Vendor Description: Users of AutoCAD can now receive instant quotes for their models through a one-click command on the AutoCAD file menu.
Print3D plug-in integrates a pricing engine into AutoCAD that instantly calculates guaranteed part quotes for every component of a CAD assembly. Designers can also order production and next-day delivery of the parts directly from the AutoCAD environment
Vendor by: Print3D
Website: http://www.print3dcorp.com/
admin
| 1/29/2009 | 314
Views
|
|
| |
|
| |
|
Handy AutoCAD-10 Pickstyle
(http://www.nyacad.com/Download.htm)
|
Vendor description: Handy AutoCAD-10 Pickstyle is a AutoCAD utility for controlling the use of group selection and associative hatch selection. Also provides AutoLISP routine for fast group creation.
Vendor by: NYacad
Website: http://www.nyacad.com/index.html
admin
| 3/5/2009 | 327
Views
|
|
| |
|
AutoCAD OwnerGuard (Personal edition)
(http://www.armjisoft.com/?page=autocadownerguard)
|
|
Vendor description: AutoCAD OwnerGuard provides a real security, protection, distribution management, publishing, licensing and DRM solution for Autodesk AutoCAD drawings (DWG). This product is made specially for internal company drawing security and publishers. Gives full control over drawings usages, distribution and ownership rights.
Benefits:
- Lock drawing to specific computer
- Control and apply all required limitations for users using a very small user side DRM component
- Minimize users DRM hassles by letting them access files offline
- Distribute and sale drawings easily with full control
- Protect ownership rights of owner
- Gain full control over sensitive drawings
Features supported with personal free edition:
- Access DRM protected drawings
- Support license limitations
- Use license code
- Create DRM protected drawings
Vendor by: Armjisoft
Website: http://www.armjisoft.com/
admin
| 3/19/2009 | 282
Views
|
|
| |
|
dwgPlotX
(http://www.karvamsoft.com/)
|
|
Vendor description: dwgPlotX (demo version) is a solution for batch plotting of AutoCAD drawing files. With this utility, multiple DWG files can be plotted with the click of a button, without the need to individually open and plot each file. This results in saving of precious man-hours. It is faster than manually plotting and boosts the drawing office productivity by a large margin.
dwgPlotX has a simple and easy to use windows explorer style user-interface for file/folder selection. The selection of all the options, i.e. plotter, paper, plot orientation, plot style table is possible through drop-down menus and input fields. The operator has to select all the files/folders to plot, set the parameters, and click the 'Plot' button -without the knowledge of any scripting language like LISP.
Vendor by: KarvamSoft
Website: http://www.karvamsoft.com/
admin
| 3/19/2009 | 314
Views
|
|
| |
|
Drawing Tabs
(http://autodesk.blogs.com/between_the_lines/2009/03/autocad- 2010-free-bonus-tool-drawing-tabs.html )
|
|
Vendor description: Drawing Tabs is a plug-in for AutoCAD 2010. The utility allows you to see and quickly navigate the files which are open in your drawing session in a series of tabs along the top of drawing window.
Note - This bonus tool is provided as-is with no support.
Vendor by: Between the Lines
Website: http://autodesk.blogs.com/between_the_lines/
admin
| 4/2/2009 | 537
Views
|
|
| |
|
EASYnat V2.5 for AutoCAD 2010
(http://www.bionatics.com/eaynetautocad)
|
EASYnat V2.5 for AutoCAD 2010 is a 32 and 64 bit version for Windows XP/Vista. This updated version includes 6 demo plants, tree, pines, palm tree, bush and flower. Compatible with AutoCAD Architecture 2010.
Vendor by: Bionatics
Website: http://www.bionatics.com/eaynetautocad
admin
| 4/23/2009 | 289
Views
|
|
| |
|
McDwiff
(http://www.macdwf.com/)
|
|
Vendor description: McDwiff is a Mac OS X viewer for Autodesk DWF files. Application is used to open, view, convert, and print DWF files.
McDwiff uses predictive image processing, supports multipage DWF files, lets you print DWFs, and can export DWF to TIF, GIF, JPG, PNG, BMP, or PDF.
Requires Mac OS X 10.4 or later.
Vendor by: Austin Silver Software
Website: http://www.austinsilversoft.com/
admin
| 5/6/2009 | 362
Views
|
|
| |
|
MDITabs
(http://www.dailyautocad.com/downloads/?dl_cat=1)
|
|
Vendor description: MDITabs is an AutoCAD ARX utility that shows open drawings as tab interface.
Requires AutoCAD 2007-2010
Vendor by: Daily AutoCAD
Website: http://www.dailyautocad.com/
admin
| 5/14/2009 | 177
Views
|
|
| |
|
Penguin 2.0 Evaluation for AutoCAD
(http://www.penguin3d.com/download.htm)
|
|
HTML clipboard Vendor description: Penguin 2.0 Evaluation is a conceptual, sketch and
cartoon, non-photometric scan line rendering and technical illustration tool for
AutoCAD. With Penguin you can create stylized images of your models with an
artistic look for enhanced graphic and visual appeal.
Penguin 2.0 Evaluation works with AutoCAD 2004 thru 2008 including AutoCAD
Architecture and AutoCAD Mechanical and has the same hardware requirements as
AutoCAD.
Features:
- Easy to use, works seamlessly inside AutoCAD
- Quickly produces an image in the desired resolution
- Uses OpenGL rendering for fast results
- Batch rendering through scripts
- Antialiasing with user control
- Complements your project renderings with synthetic images
- Ability to create your own rendering styles
- Supports TGA, BMP, PCX, PNG and JPEG file formats
- Supports background bitmaps
- Supports dimensions, annotations and curves
- New shader engine
- Supports shadows
- Specific settings for every
object
- Export a render into a
vector format
Note: Penguin 2.0 Evaluation is a fully functional version that draws thin
black lines across the final rendered image.
Vendor by: Robert McNeel
Website: http://www.penguin3d.com/default.htm
admin
| 5/28/2009 | 325
Views
|
|
| |
|
Holeshot
(http://www.appengsupport.com/)
|
Vendor description: Holeshot is an utility that allows the user to insert hole symbols into their 2D AutoCAD drawings by selecting a hole size and a view from standard charts.
Vendor by: Appalachian Engineering
Website: http://www.appengsupport.com/
admin
| 7/3/2009 | 258
Views
|
|
| |
|
CMS Xpandy powered by IntelliCAD 6.3
(http://intellicadms.com/site/Products.html)
|
Vendor description: CMS Xpandy powered by IntelliCAD 6.3, is a free CAD program offering users the possibility of precise creation/edition of Autodesk DWG drawings files, using IntelliCAD 6.3 technology. It features all well known drawing commands, and easy to use IntelliCAD user interface.
It also allows users to create their own ads using Xpandy technology marketing right inside the CMS Xpandy UI marketing channel window.
CMS Xpandy powered by IntelliCAD 6.3 drawing commands are industry standards, and so allows users to acquire standard CAD skills.
Vendor by: CMS
Website: http://intellicadms.com
admin
| 6/11/2009 | 1034
Views
|
|
| |
|
WinDoor
(http://www.ductisoft.com/en/windoors.html)
|
|
Vendor description: It is a simple utility for AutoCAD that enable users to insert windows and doors by selecting only a 2-lines entity. Easy to use, you can insert a wide range of architectural door and window blocks faster. The utility trims wall lines and let you move and stretch any inserted component.
WinDoor is entirely made in LISP scripting language and use ObjectDCL technology for great looking dialogs.
Vendor by: DuctiSoft
Website: http://www.ductisoft.com/index.html
admin
| 6/16/2009 | 285
Views
|
|
| |
|
Handy AutoCAD-12. Hatch Edit
(http://www.nyacad.com/Handy%20AutoCAD-12.html)
|
|
Vendor description: Handy AutoCAD-12. Hatch Edit is a utility to save your time and improve representation of drawings.
Features:
- Convert hatch to associative pattern (HAS) option
- Hatch fix option (HF) - hatches can be fixed by changing origin point using 'set origin option'
- Add hatch boundary (HBO) option (except in AutoCAD 2010)
Vendor by: NYacad
Website: http://www.nyacad.com/index.html
admin
| 6/18/2009 | 310
Views
|
|
| |
|
AutoDWG DWG Indexer
(http://www.autodwg.com/indexdwg.htm)
|
|
Vendor description: AutoDWG DWG Indexer is a plug-in for Google desktop to search DWG/DXF files, a thumbnail is created for each DWG file in the search list for easy access.
Features:
- Supports DWG, DXF file formats
- Supports AutoCAD R2.6 thru 2009 versions
Vendor by: AutoDWG
Website: http://www.autodwg.com/
admin
| 6/23/2009 | 274
Views
|
|
| |
|
CadTools
(http://www.glamsen.se/CadTools.htm)
|
Vendor description: CadTools is developed for civil engineers using AutoCAD. CadTools provides over 50 commands mostly in real 3D to support civil design work. Supports AutoCAD 2001 thru 2010 versions.
Vendor by: Glamsen
Website: www.glamsen.se/CadTools.htm
admin
| 7/1/2009 | 413
Views
|
|
| |
|
Palette Auto-hide Speed
(http://www.jtbworld.com/PaletteAuto-hideSpeed.htm)
|
Vendor description: Pallet Auto-Hide Speed helps to change the time it takes to show/hide or roll-up/roll-out the palette windows in AutoCAD, AutoCAD Architecture or other verticals.
Vendor by: JTB World
Website: http://www.jtbworld.com/index.htm
admin
| 7/13/2009 | 484
Views
|
|
| |
|
Textures
(http://www.cadyou.com/searches/downloads/type:texture/sort:i d/direction:desc )
|
|
Vendor description: Textures are free to download utilities for AutoCAD, consisting of various surface patterns and color to add details to various 3D and 2D models.
Includes:
• Steel Louvre • Corten Steel • Chipboard • Old Industrial Bricks • Widescreen Cloudy Sky • Asphalt Road • Green Mosaic Tiles • More
Vendor by: CADyou
Website: http://www.cadyou.com/
admin
| 7/14/2009 | 261
Views
|
|
| |
|
Pipe2CAD
(http://www.pipe2cad.com/download.html)
|
|
Vendor description: Pipe2CAD is an AutoCAD add-on that can be used to design pipe networks, such as water supply, sanitary sewer and storm drainage networks. After designing the hydraulic design of your pipe networks with any available hydraulic design packages, networks can be imported into Pipe2CAD environment to proceed with all subsequent design steps like checking interference points and conflict between different networks, editing networks by adding, deleting or adjusting pipes and finally producing full formatted plan view and longitudinal profiles.
Features:
- Importing pipe networks
- Exporting pipe networks
- Editing environment
- Crossing points/pipe interference
- Low and high points or pressure networks
- Longitudinal profiles
Vendor by: Pipe2CAD
Website: http://www.pipe2cad.com/index.html
admin
| 7/17/2009 | 285
Views
|
|
| |
|
AutoCAD Version Explorer
(http://www.jmsware.com/info-ave.html)
|
|
Vendor description: AutoCAD Version Explorer (AVE) is a stand-alone program that provides an Explorer-like interface to quickly view AutoCAD preview and version information Features: - Display versions (AutoCAD v2.5 thru 2007)
- Display preview images (AutoCAD R13 thru 2007)
- Output selected files or entire directory to HTML format
- Create zip files from selected files or entire directory
- Display 3X view and various file management options by right-clicking a file
- Full drag-n-drop support for easy integration with other Windows software
- Optional shell integration
- Small, fast and self-contained. No external files required
Vendor by: JMSware
Website: http://www.jmsware.com/index.html
admin
| 7/20/2009 | 357
Views
|
|
| |
|
AutoDWF
(http://www.xanadu.cz/dl_file.asp?ID=453)
|
Vendor description: AutoDWF application can automatically save or publish a file in the DWF publishing format with every save or plot of the DWG drawing. You can set the target folder for published DWFs and optionally also upload them automatically to a FTP or iProject server. You can also add the 'AutoDWF Now' command to your plot menu macros. AutoDWF can help in company document management and opens access to the most current versions of AutoCAD drawings both for members of your design team and non-CAD users.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 7/21/2009 | 162
Views
|
|
| |
|
AllAnno
(http://www.xanadu.cz/dl_file.asp?ID=932)
|
|
Vendor description: AllAnno is a LISP add-on for AutoCAD that sets annotation scale settings (variables) for all layouts.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 7/21/2009 | 202
Views
|
|
| |
|
2Dunfold
(http://www.xanadu.cz/dl_file.asp?ID=900)
|
Vendor description: 2Dunfold is a VLX utility for AutoCAD that unfolds 2D curves to straight polylines.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 7/21/2009 | 404
Views
|
|
| |
|
BBox
(http://www.xanadu.cz/dl_file.asp?ID=914)
|
Vendor description: BBox is a utility for AutoCAD that can draw permanent or temporary bounding boxes like rectangles or circles for selected drawing objects.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 7/26/2009 | 212
Views
|
|
| |
|
BLegend
(http://www.xanadu.cz/dl_file.asp?ID=928)
|
Vendor description: BLegend is a VLX plug-in for AutoCAD to create a visual table (legend) of blocks used in the drawing.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 7/26/2009 | 222
Views
|
|
| |
|
BrkList
(http://www.xanadu.cz/dl_file.asp?ID=907)
|
Vendor description: BrkList is an add-on for AutoCAD which breaks and marks selected curve at multiple points specified by a list of coordinates.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 7/26/2009 | 211
Views
|
|
| |
|
3DFTO3DP.LSP
(http://www.dotsoft.com/freestuff.htm)
|
Vendor description: 3DFTO3DP.LSP is a LISP utility for AutoCAD to convert the selected set of 3DFACES into 3DPOLY's.
Vendor by: DotSoft
Website: http://www.dotsoft.com/index.html
admin
| 8/18/2009 | 275
Views
|
|
| |
|
ANGLEREP.VLX
(http://www.dotsoft.com/freestuff.htm)
|
Vendor description: ANGLEREP.VLX is a VLX plug-in for AutoCAD which reports the interior and exterior angles between two straight segments.
Vendor by: DotSoft
Website: http://www.dotsoft.com/index.html
admin
| 8/18/2009 | 241
Views
|
|
| |
|
ARCOMP.VLX
(http://www.dotsoft.com/freestuff.htm)
|
Vendor description: ARCOMP.VLX is a VLX application for AutoCAD that Generates the complementary arc to selected arc.
Vendor by: DotSoft
Website: http://www.dotsoft.com/index.html
admin
| 8/18/2009 | 229
Views
|
|
| |
|
DBXscanXref
(http://www.xanadu.cz/dl_file.asp?ID=888)
|
Vendor description: DBXscanXref is a utility that scans and reports DWG drawings containing Xref references to other DWG files.
Features: # The DBXscanXref is a tool which scans all drawings in the selected folder and its sub-folders and writes a report about the DWG Xrefs detected in the individual files. It does NOT make any changes in the DWG files # Only DWG Xrefs are detected. Without opening the individual DWGs, you can use this utility to detect drawings which are not complete and should be transmitted with eTransmit
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 8/23/2009 | 192
Views
|
|
| |
|
ExplodeM
(http://www.xanadu.cz/dl_file.asp?ID=915)
|
Vendor description: ExplodeM is a VLX Lisp add-on for AutoCAD to explode unexploded MINSERT blocks and also removes pseudo-protection of DWG drawings.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 8/23/2009 | 198
Views
|
|
| |
|
fAREA
(http://www.xanadu.cz/dl_file.asp?ID=636)
|
Vendor description: fAREA is a VLX LISP plug-in for AutoCAD which creates a dynamic area label,length label, or property label.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 8/23/2009 | 210
Views
|
|
| |
|
| |
|
| |
|
3dgear.zip
(http://www.cadtoolsonline.com/free.htm)
|
Vendor description: 3dgear.zip is a utility for AutoCAD that draws 3D solid models of standard involute tooth gears. You can specify the pitch, pressure angle, number of teeth, width, and insertion point. The Precision check box will cause the gear to be created with a more accurate involute and can take more time
Vendor by: CADToolsOnline.com
Website: http://www.cadtoolsonline.com/index.htm
admin
| 8/31/2009 | 339
Views
|
|
| |
|
FieldLink
(http://www.xanadu.cz/dl_file.asp?ID=952)
|
Vendor description: FieldLink is a VLX application for AutoCAD to draw temporary lines between fields and their source objects.
Vendor by: XANADU
Website: http://www.xanadu.cz/en/
admin
| 9/8/2009 | 199
Views
|
|
| |
|